Cantek CT-NC304-XB Specsheet
NC304-XB
4 MP EXIR Bullet Network Camera
1/3” Progressive Scan CMOS
Up to 4 megapixel resolution
120dB Wide Dynamic Range
3D DNR
EXIR high performance LEDs
Up to 30/50/80 meters IR range
12V DC±10% & PoE(802.3af)
Support H.264+
IP66
Specification
Camera
Image Sensor
1/3’’ Progressive Scan CMOS
Min. Illumination
0.01Lux @(F1.2,AGC ON), 0.028Lux @(F2.0,AGC ON), 0 Lux with IR
Shutter Speed
1/3 s ~ 1/10,000 s
Slow Shutter
Support
Lens
4mm @F2.0
Lens Mount
M12
Day & Night
IR cut filter with auto switch
WDR
120dB
Compression Standard
Video Compression
H.264/MJPEG/H.264+
H.264 Type
Main Profile
Video Bit Rate
32 Kbps – 16 Mbps
Image
Max. Resolution
2688 × 1520
Frame Rate
50Hz: 20fps (2688×1520), 25fps(1920×1080), 25fps(1280×720)
60Hz: 20fps (2688×1520), 30fps (1920×1080), 30fps(1280×720)
Image Enhancement
BLC/3D DNR/ROI
Image Setting
Rotate Mode, Saturation, Brightness, Contrast, Sharpness adjustable by client software or web
browser
Day/Night Switch
Auto/Schedule/Triggered by Alarm In
Network
Network Storage
NAS (Support NFS,SMB/CIFS)
Alarm Trigger
Intrusion Detection, Line Crossing detection, Motion detection, Dynamic Analysis, Tampering alarm,
Network disconnect, IP address conflict, Storage exception
Protocols
TCP/IP, UDP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP,
SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour
Security
Flash-prevention, dual stream, heartbeat, mirror, password protection, privacy mask, watermark, IP
address filtering, Anonymous access
Standard
ONVIF (PROFILE S, PROFILE G), PSIA, CGI, ISAPI
General
Communication
Interface
1 RJ45 10M/100M Ethernet interface
Operating Conditions
-30 °C – 60 °C (-22 °F – 140 °F), Humidity 95% or less (non-condensing)
Power Supply
12V DC±10%, PoE (802.3af)
Power Consumption
Max. 7.5W
Ingress Protection
level
IP66
IR Range
50 meters;
Dimensions
299.71 × 86.48 × 85.11(11.8’’ × 3.4’’ × 3.35’’)
Weight
1200g (2.65 lbs)
NC304-XB
4 MP EXIR Bullet Network Camera
Loading...