Cantek CT-NC304-TDC Specsheet
NC304-TDC
4MP WDR Fixed Dome Network Camera
Up to 4 megapixel high resolution
Full HD1080p video
Dual video streams
2.8mm/4mm/6mm fixed lens
120dB Wide Dynamic Range
3D Digital Noise Reduction
3-axis adjustment
DC12V & PoE
Support H.264+
Up to 30m IR range
IP66 weather-proof protection
IK08 vandal-proof protection
-S: Audio/Alarm IO
-W: Built-in Wi-Fi
Specification
Camera
Image Sensor
1/2.8" Progressive Scan CMOS
Min. Illumination
0.01Lux @ (F1.2, AGC ON) ,0 Lux with IR
Shutter Speed
1/3 s to 1/10,000 s
Lens
2.8mm, 4mm, 6mm @ F2.0
Lens Mount
M12
Day &Night
IR cut filter with auto switch
DNR
3D DNR
Wide Dynamic Range
120dB
P&T rotation
Pan: -90° ~ 90°, Tilt: 0° ~ 75°
Compression Standard
Video Compression
H.264 / MJPEG/H.264+
H.264 Type
Main Profile
Video Bit Rate
32 Kbps ~ 8 Mbps
Dual streams
Support
Image
Max. Resolution
2688×1520
Frame Rate
50Hz: 20fps (2688×1520), 25fps(1920×1080), 25fps(1280×720)
60Hz: 20fps (2688×1520), 30fps (1920×1080), 30fps(1280×720)
Image Setting
Rotate Mode, Saturation, Brightness, Contrast, Sharpness adjustable by client software or web browser
BLC
Support, zone configurable
ROI Codec
Support
Network
Network Storage
NAS (Support NFS,SMB/CIFS), ANR
Alarm Trigger
Motion detection, Tampering alarm, Network disconnect, IP address conflict, Storage exception
Protocols
TCP/IP, UDP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP,
IGMP, 802.1X, QoS, IPv6, Bonjour
General
One-key reset, Flash-prevention, dual stream, heartbeat, mirror, password protection, privacy mask,
watermark, IP address filtering, Anonymous access
Standard
ONVIF (PROFILE S, PROFILE G), PSIA, CGI, ISAPI
Interface
Communication
Interface
1 RJ45 10M/100M Ethernet port
On-board storage
Built-in Micro SD/SDHC/SDXC slot, up to 128GB
Alarm interface
1x alarm I/O *only for –S models
Audio interface
1x audio I/O *only for –S models
Reset
Yes
NC304-TDC
4MP WDR Fixed Dome
Network Camera
Loading...