WARNING!!
Furniture Tipping Risk.
Serious risk of severe or fatal crush injuries can occur from
furniture tipping over if not secured.
Children like to climb on furniture and Unsecured furniture can
pose a serious danger.
Please follow all instructions and install the tip-over restraints
provided.
In addition to installing the restraints, to help prevent tip-over:
1. Unless specifically designed to accommodate, do not set TV’s
or other heavy objects on top of this product.
2. Never allow children to climb or hang on top glass.
3. Do not step on the Cabinet.
1
Caution : You must read this before you proceed
Cabinet
Label Picture Description QTY
A Top Panel 1
B Left Side Panel 1
C Right Side Panel 1
2
D Stand Panel 1
E Left Door Panel 1
F Right Door Panel 1
G Back Panel 2
H Shelf Panel 1
I Blend Stop 1
J Slot Bar 1
K Left Side Rail 1
L Right Side Rail 1
Label Picture Description QTY
3
①
Screw(3x14MM) 25
②
Screw(4x30MM) 4
③
Bolt(M4*25MM) 5
④
Washer 9
⑤
Bolt (M3*12MM) 5
⑥
Bolt (M3*14MM) 5
⑦
Door Stopper 2
⑧
Adjustable Leveller 5
⑨
Positioning Dowel 17
4
⑩
Door Knob 2
⑪
Allen Key 1
⑫
Plastic Corner Support
4
⑬
Bolt(M6*35MM) 9
⑭
Bolt(M4*40MM) 7
⑮
Hinge 4
⑯
Washer 2
⑰
Bolt (M3*16MM) 5
Restraint Device Hardware
⑱
Restraint Strap 2
5
⑲
Screw 2
⑳
Wall Anchor 2
Screw 2
Hammer (not
provided)
1
Power Drill (not
provided)
1
Before
Beginning
Assembly:
6
Overview
This Cabinet has multiple parts and may require up to some 30 minutes to
assemble. To give you an overview of the Cabinet parts, the above picture is to
help you put the various parts into perspective. Please read through the
instructions herebelow to familiarise the parts and steps before assembly.
Step 1
1.1)Insert Positioning Dowel(⑨) into the mounting positions on Panel(B) .
Attach the Left Side Rail(K) to the Stand Panel(B) using Bolt(⑭) with Allen Key(⑪ ).
1.2)Insert Positioning Dowel(⑨) into the mounting positions on Panel(C).
Attach Right Side Rail(L) to the Stand Panel(C) using Bolt(⑭) with Allen Key(⑪).
1.3) Insert Positioning Dowel(⑨) into the mounting positions on Stand Panel(D) .
Attach the Right Side Panel(C) to the Stand Panel(D) using Washer(④) and Bolt(⑬) with
Allen Key(⑪ ) .
Fully tighten it until secure.
FRONT FACING
1.1
1.2
1.3
7
Step 2
2.1) Attach Left Side Panel(B) to the Stand Panel(D) using Bolt(⑬) and Washer(④) with
Allen Key(⑪).
2.2)Attach Adjustable Leveller(⑧) to the legs of Left Side Panel(B) and Right Side Panel(C)
by hand.
2.3)Insert Back Panels(G) into the grooves on Left Side Panel(B), Right Side Panel(C) and
Bottom Panel(D).
Insert Slot Bar(J) into the middle of the Back Panels(G).
Step 3
3.1)Attach Door Stopper(⑦) to Blend Stop(I) using Bolt(⑥)with Allen Key(⑪).
3.2)Attach Blend Stop(I) to the Top Panel(A) using Screw(②)with Allen Key(⑪).
3.3)Insert Positioning Dowel(⑨) into the pre-drilled mounting points on the left and right
sides of the Left Side Panel(B)&Right Side Panel(C) .
Attach the Top Panel(A) to the Left Side Panel(B)&Right Side Panel(C) using Bolt(⑬) and
Washer(④) with Allen Key(⑪).
3.1
3.2
3.3
2.1
2.2
2.3
8
Step 4
4.1) Attach the Left Door Panel(E)&Right Door Panel(F) to the Left Side Panel(B)&Right
Side Panel(C) using Screw(①) and Hinge (⑮) with Allen Key(⑪).
4.2)Attach Door Knob(⑩) to the Left Door Panel(E)&Right Door Panel(F)using Bolt(③)with
Allen Key(⑪ ).
4.3)Attach Washer (⑯) to Left Door Panel(E)&Right Door Panel(F) with Bolt(⑤).
Step 5
5.1) Insert Positioning Dowels(⑨) into the pre-drilled mounting positions in the inside of the
Left Side Panel(B) and Right Side Panel(C).
5.2) Place the Shelf Panel(H) onto the Positioning Dowels(⑨).
Step 6
4.2
4.1
5.2
5.1
4.3
9
Attach Plastic Corner Support (⑫ ) to the back of the four corners of the cabinet using
Screw(⑰)with Allen Key(⑪).
WARNING
Serious or fatal crushing injuries can occur from tipping furniture.
To help prevent tip-over: ALWAYS secure this furniture to the wall using
the Cabinet Restraint Device.
See product instructions for more ways to help prevent furniture tip-over.
Usage For Cabinet Restraint Device:
To Secure Cabinet against wall, attach Restraint Strap(⑱) to wall and product.
Instructions:
Step 7
10
Turn the Cabinet so the back faces you.
Attach Restraint Strap(⑱ ) to the side of Left Side Panel(B)& Right Side Panel(C)using
Screw (⑲) with Allen Key(⑪ ).
Step 8
8.1) Drill two holes on wall with Power Drill( ).
You can mark these points in two ways as below:
1) Move the Cabinet back to the wall.
Note: The restraint strap need to be secured to solid, load bearing surface. Please
use a Stud Finder(not supplied) if needed to locate the Wall Frame.
2) Measure the height of Restraint Strap (⑱) with ruler/measuring tape and mark on wall to
keep them accurate and same height.
8.2) Insert Wall Anchor (⑳ ) into drilled holes on wall with Hammer( ).
Step 9
Attach Restraint Strap (⑱) to Wall Anchor (⑳) using Screws( ) with Allen Key(⑪ ) .
Move Cabinet to the wall.
The Cabinet Restraint Device is installed.
8.1
8.2
11
Step 10
Your Cabinet is ready for use.
Caution: This Cabinet can only be used on a flat, level surface.
12
13
Loading...