ASSEMBLY INSTRUCTIONS
Description
Dimension
: 18”1/2Wx23”Dx39”H
: DINING CHAIR WITH WOOD SEAT
Cube Size :40.3”x19”x11”
DINING CHAIR WITH WOOD SEAT
NW : 35.2 LBS
GW : 41.8 LBS
- 1 -
BEFORE ASSEMBLY
Thank you for purchasing our product. This product has been designed for easy assembly and long
PART LIST
NO
Description
Qty
Sketch
NO
Description
Qty
Sketch
A
Chair back
1 B Seat Frame
1
C
Front Leg
2
ASSEMBLY TOOLS REQUIRED
NOT INCLUDED
Hardware bag
location
lasting use. Please take the time to read and follow the assembly instructions carefully.
Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment.
Please separate, identify, and count all parts and metal hardware. Compare with part list to be sure all parts are present.
If hardware is missing or you have difficulty assembling this product, please call for us.
IMPORTANT NOTE:
- Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being
scratched.
- Remove all wrapping material, including staples & packing straps before you start to assemble.
- DO NOT tighten all screws and bolts until completely assembled.
- Keep all hardware parts out of reach of children.
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you
have the following parts:
DINING CHAIR WITH WOOD SEAT
- 2 -
HARDWARE LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you
NO
Description
Qty
Sketch
NO
Description
Qty
Sketch
1
Long bolt
(M6x80mm)
4
2
Medium bolt
(M6x60mm)
4
3
Short bolt
(M6x40mm)
2
4
Lock Washer
(Ø6.5x9)
10
5
Flat Washer
(Ø6.5x19)
10
6
Allen Key
(4mm)
1
STEP 1
X2
have all of the following hardware:
Attach frame (B) to the back (A) by using bolts (3) and (1) and washers (4) and (5). Tighten with Allen
Key (6).
Note: DO NOT tighten any of the bolts, until the chair is assembled.
DINING CHAIR WITH WOOD SEAT
- 3 -
STEP 2
Attach front legs (C) to the seat frame. Use bolts (2), washers (4) and (5). Tighten with Allen Key (6).
Check to make sure two
edges are flush or aligned.
Otherwise, the chair will be wobbly.
STEP 3
Put the chair on a flat level surface to make sure the chair is level and then tighten the all bolts.
DINING CHAIR WITH WOOD SEAT
- 4 -
Loading...