Instruction Manual
Table Lamp
Overview
A
B
C
NO. Name
A
B
C
Bulb E26（not included)
Finial
Lampshade
Assembly Instruction
1) Pull out the power cord until Socket Assembly
reaches Lamp base
2) Rotate Socket Assembly counter-clockwise
by two turns
3) Screw Socket Assembly onto Lamp Base
Product Specifications
4) Insert Harp into Saddle
5) Assembly Lampshade as it shows below
6) Install Bulb(not included), then put
Lampshade onto Harp and tighten
Input voltage 120V
it with Finial
Rated power 100W MAX
Lamp socket E26
1
saddle
1
Safefy Warning:
BULB TYPE:
Use only the bulb type and wattage indicated on Wattage
Label placed on or near socket.
WARNIN G: NEVER EXCEED MAXIMUM WATTAGE
Indicated as bulb may cause fire.
CAUTION:
This portable lamp has a polarized plug (one blade is
wider than the other) as a safety feature. This plug can
be used in a polarized outlet only one way. If plug does
not fit fully into the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician.
DO NOT ALTER THE PLUG!
D
E
F
G
D
E
Harp
2
Socket assembly
Cord length 5 ft.
Overall size 27.5”H X 14”W
2
Product Packaging
F
G
1
Lamp base
Power cord
3
2 3
Lampbase X 2
Lampshade X 2
Harp&Finial X 2
3
4
5 6
Manual X 1
7
Wide Blade
PROPER LAMP CARE:
Use a soft cloth to dust your lamp on a regular basis.
Never use chemicals or an abrasive cleaner, to do so
may damage the finish on your lamp.
TROUBLESHOOTING:
If fixture does not work:
1. Turn off electrical power and check all wire connections.
2. Check fuse or circuit breaker and replace if necessary.
3. Check to make sure light bulb is in working order.
Loading...