Instruction Manual
Product Specifications
Overview
Table Lamp Set Of 2
Input voltage 120V
Rated power 100W MAX
USB port 5V 2A
Lamp socket E26
Cord Length 5ft.
Product Packaging
Lamp base assembly × 2
Lamp shade cloth × 2
Shade frame × 4
Harp&Finial × 2
E26 bulb × 2
Lamp manual × 1
Lamp shade manual × 1
Safety Warning:
BULB TYPE:
Use only the bulb type and wattage indicated on Wattage
Label placed on or near socket.
WARNIN G: NEVER EXCEED MAXIMUM WATTAGE
Indicated as bulb may cause fire.
H. Finial
G. Lampshade
F. Harp
E. E26 bulb
D. Saddle
C. Socket assembly
B. Lamp base
A. Power cord
I. USB port
Assembly Instruction
1.Rotate Socket assembly C counter-clockwise by two turns, then
screw Socket assembly onto Lamp base B and tighten.
2.Insert Harp F into Saddle D.
3.Install E26 bulb E into socket.
4.Attach assembled Lamp shade G onto Harp F and tighten it with
Finial H.
CAUTION:
This portable lamp has a polarized plug (one blade is
wider than the other) as a safety feature. This plug can
be used in a polarized outlet only one way. If plug does
not fit fully into the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician.
DO NOT ALTER THE PLUG!
Wide Blade
PROPER LAMP CARE:
Use a soft cloth to dust your lamp on a regular basis.
Never use chemicals or an abrasive cleaner, to do so
may damage the finish on your lamp.
TROUBLESHOOTING:
If fixture does not work:
1. Turn off electrical power and check all wire connections.
2. Check fuse or circuit breaker and replace if necessary.
3. Check to make sure light bulb is in working order.
For Lamp shade assembly, please refer to attached
insruction-Lamp Shade Assembly.
Lamp Shade Assembly
1.Push and pull the fabric to be tight before
attach it together by velcro.
Loading...