Sconce
or closing the circuit breaker. Installation must be in compliance with
National, State and Local electrical codes. Please use a licensed electrician
Each light fixture, with the exception of post-mounted lanterns, has
a mounting bar or plate to secure it to the electrical junction box.
requires three basic steps.
A. Attach the mounting bar/plate to the electrical junction box.
B. Connect the electrical wires from the junction box to the electrical
wires of the light.
A. Attaching the Mounting Bar/Plate
Be careful not to lose any small parts necessary for the installation.
2. Pull the electrical wires part way out of the junction box for easier access.
B. Connecting the Electrical Wires
Hard wired installation
fig. A
Mounting bar
fig. B
FIXTURE WIRES
BLACK
WHITE
BARE COPPER
(Grou nd)
Junction box
HOUSE WIRES
BLACK
WHITE
GREEN
(Grou nd)
wire (green or copper) to the mounting bar with the green screw provided.
Be certain that all connections are tight and NO bare wire is visible.
(note: ground wire will show bare wire.)
2. Tuck the wires into the junction box.
C. Securing the Light Fixture to the Mounting Bar
and restore the power to the junction box .
4. Your installation is complete.
DO NOT USE abrasives or ammonia.
2
Loading...