Assembly Instructions
Caution : You should read this carefully before you proceed
Please look in the third support leg for hardware packs
Bed
Parts List
Label Picture Description QTY
A Headboard 1
B Right Leg 1
C Left Leg 1
D Footboard 1
E First Side Rail 2
F Second Side Rail 2
G First Support Leg 1
H Second Support Leg 1
I Third Support Leg 2
J First Slat Frame 1
K Second Slat Frame 1
Page 1 OF 8
①
②
③
④
⑤
⑥
⑦
⑧
Hardware
Label Picture Description QTY
Bolt (M6 x 10 mm) 9
Bolt (M8 x 25 mm) 13
Bolt (M6 x 25 mm) 18
Allen Key (K5) 2
Connection Metal 2
Screw (ф 4 x25 mm)
Allen Key (K4) 2
Screwdriver (not provided) 1
15
Page 2 OF 8
Assembly Steps
Assembly Preparation
Footboard (D)
Before Beginning Assembly:
X9 X18 X13 X15
X2 X2 X2
OVERVIEW
Headboard (A)
Left Leg (C)
First Side Rail (E)
Third Support Leg (I)
Second Side Rail (F)
This Bed has multiple parts and may require up to some 30 minutes to assemble. To give you an
overview of the Bed parts, the above picture is provided to help you put the various parts into
perspective. Please read through the instructions below to familiarise yourself with the parts and
steps before assembly.
Right Leg (B)
First Support Leg (G)
Second Slat Frame Leg (K)
First Slat Frame Leg (J)
Second Support Leg (H)
FRONT FACING
Page 3 OF 8
Step 1:
Unpack and place all parts on a clean, non-marring surface.
Step 2:
6
3
Headboard (A)
Right Leg (B)
With assistance from your adult partner, carefully place the Headboard(A) facedown on a clean, nonmarring surface as shown above.
Attach the Right Leg (B) and the Left Leg (C) to the Headboard (A), then place the Connection Metal
(⑦) onto it as shown above. Secure it using Bolts (③) and the Allen Key (⑥).
Do not fully tighten the Bolts at this stage.
Step 3:
7
Left Leg (C)
6
2
Third Support Leg (I)
Second Side Rail (F)
Connect the Third Support Leg (I) to the First Side Rail (E ) and the Second Side Rail (F), then
secure it using Bolts (②) and the Allen Key (⑥) as shown above.
Repeat the same process with the remaining First Side Rail (E) and the Second Side Rail (F).
Do not fully tighten the Bolts at this stage.
First Side Rail (E)
Page 4 OF 8
Step 4:
1
Headboard (A)
1
With the help of your adult partner, attach the frame from step 3 to the frame from step 2, then
secure it using Bolts (①) and the Allen Key (⑤) as shown above.
Do not fully tighten the Bolts at this stage.
5
Step 5:
Headboard (A)
1
5
1
Footboard (D)
With the help of your adult partner, attach the Footboard (D) to the frame from step 4, then secure it
using Bolts (①) and the Allen Key (⑤) as shown above.
Do not fully tighten the Bolts at this stage.
Page 5 OF 8
Step 6:
Headboard (A)
Left Leg (C)
1
Footboard (D)
5
1
With the help of your adult partner, align the Left Leg (C) to the frame from step 3 and the Footboard
(D). Secure it using Bolts (①) and the Allen Key (⑤) as shown above.
Do not fully tighten the Bolts at this stage.
Step 7:
3
Step 7.1
First Side Rail (E)
6
4
Step 7.2
Second Slat Frame (K)
First Support Leg (G)
7.1 Secure the Second Slat Frame (K) to the First Support Leg (G) using Bolts (③) and the the Allen
Key (⑥) as shown above.
7.2 Secure the Second Slat Frame (K) to the First Side Rail (E) using Screws (④) and a Screwdriver
(not provided) as shown above.
Do not fully tighten the Bolts and screws at this stage.
Page 6 OF 8
Step 8:
3
6
First Slat Frame Leg (J)
4
Step 8.1
Step 8.2
Second Support Leg (H)
Second Side Rail (F)
8.1 Secure the First Slat Frame (J) to the Second Support Leg (H) using Bolts (③) and the Allen Key
(⑥) as shown above.
8.2 Secure the First Slat Frame (J) to the Second Side Rail (F) using Screws (④) and a Screwdriver
(not provided) as shown above.
Do not fully tighten the Bolts and screws at this stage.
Step 9:
Check for wobbles.
If the bed does not wobble, in a sequential manner, gradually tighten all Bolts until evenly secured.
Inspect the Bed and make sure all parts are adequately connected.
With assistance from your adult partner, adjust the levellers to the desired height to avoid wobbles.
To adjust the Levellers, get assistance from an adult partner to lift/lean and hold the Bed while you are working.
Your Bed is ready for use.
This Bed can only be used on a flat, level surface.
Page 7 OF 8
Page 8 OF 8
Loading...