ASSEMBLY INSTRUCTIONS
Parts List
Pieces
A
B
C
D
E
F
G
H
I
J
1
2
3
4
5
6
7
8
Schema
(M8)
(M8*5 5)
(M8* 35 )
Descri ption
Screw
Flat washer
Lock washer
Nut
Alu plate
Nut cap
Wrench
PE cap
Seat
Base
Alu plate
Spring plate
Screw
Flat washer
Lock washer
Nut
TR
QTY
4
4
4
4
4
4
1
Factory
already
assembled
1
1
2
2
4
4
4
4
1
WARNING!WARNING!
This chair has a 250 lbs weight capacity.
Hang cushion over chair frame to dry if it gets wet to prevent mold/mildew.
ATTENTION:ATTENTION:
1. Please read these instructions carefully before assembly.
2. Aluminum is soft metal over tighten may strip threads or break the part.
3. DO NOT use power tools.
4. Check parts against the parts list to make sure you have all parts needed for
proper assembly.
5.Familiarize yourself with the inventory of parts and the accompanying illustrations
to ensure safe and proper assembly.
Made in China
ASSEMBLY INSTRUCTIONS
ATTENTION:ATTENTION:
1. Please read these instructions carefully before assembly.
2. Aluminum is soft metal over tighten may strip threads or break the part.
3. DO NOT use power tools.
4. Check parts against the parts list to make sure you have all parts needed for proper assembly.
5.Familiarize yourself with the inventory of parts and the accompanying illustrations to ensure safe
and proper assembly.
Assembly steps:Assembly steps:
1.Loo sely atta ch th e 4 legs (C) to t he table to p with bolt s(D),fl at washer s(E ),lock wa shers(F ),nuts( G)
and nut c aps(H). Do not over-ti ghten.
2.Loosely attach each of the 4 center plates(B&B1) to the legs. Note that the recessed end of each
plate goes on the leg last at each corner. Secure using flat washers, lock washers, nuts(G) and nut
caps(H)(show as the figure).
3.Tighten all the bolts and nuts completely. DO NOT over tighten the nuts and bolts.
4.Turn the table onto its legs and use the adjuster feet to level the tables.
Warning : please do not use harsh chemicals to clean the table.
H
11
C
A
G
F
E
D
33
Q
Part s list Part s pictu re Desc ripti on
A
B
B1
C
Q
DO NOT OVER TIGHTEN
*
Table top
Center plate
Center plate
Table leg
Adjustable
Foot
Q'ty
Part s list Part s pictu re
1
2
2
4
Factory
already
assembled
Made in China
D
E
F
G
H
I
22
NO POWER TOOLS
*
B
B1
Desc ripti on
Screw
Flat washer
Lock washer
Nut
Nut cap
Wrench
Q'ty
4
12
12
12
12
1
NO SOCKET DRIVERS
*
1. Before removing all protective packing material and
position base on floor. Attach the seat(I) onto the base
(J)with Alu plate as the picture, then assemble
using bolt(A), flat washers(B), lock washers(C), nuts(D)
and nut cap(F). Be sure to the arrows face to front.
2. Tighten all the bolts and nuts. Test the swivel rocker
gently. If the rocker does not rock properly, double
check the assembly procedure.
3. Remove all protective packaging.
Warning : DO NOT use acid or alkaline
J
washing liquid to clean the product.
F
D
C
B
E
I
A
H: This part hav e been asse mbled by
facto ry alread y.
DO NOT OVER TIGHTEN
*
NO SOCKET DRIVERS
*
Made in China
NO POWER TOOLS
*
Loading...