ASSEMBLING & INSTALLATION INSTRUCTIONS
The drawing shown may not exactly match the product enclosed.
However, the installation instructions do apply to this product.
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
ATTENTION! COUPER LE COURANT AU FUSIBLE OU UN DISJ ON CTEUR.
ASSEMBLING THE FIXTURE (Fig.1)
1. FIRST, PLEASE WEAR COTTON GLOVES ON YOUR HANDS!
2. Shut off the power at the circuit breaker and remove old fixture,
including the single bar.
3. Carefully unpack your new fixture and lay out all the parts on a clear
area. Take care not to lose any small parts necessary for
installation.
4. NOTE: Discharge of the finial(A), remove the plastic shim(B) and
cover(C).
5. Be very careful, hold the glass(G) insert the frame of the lamp
body(D). NOTE: first, the bottom of glass must inset to the frame in
the place, fixed the glass with the small sheet copper in the frame.
Place the candle sleeve(E) over the lamp holder.
6. Install the light bulbs(No Included) in accordance with the fixture's
specifications. NOTE: DO NOT EXCEED THE MAXIMUM
WATTAGE RATING!
7. Attach the cover(C) and plastic shim(B) to the top pipe thread of
lamp body(D), then lock it securely with the finial(A).
8. Attach the assembly lamp body onto the post (No included) and lock
it securely with the screws(F).
CONNECTING THE WIRES (Fig.2)
1. Connect the electrical wires as follows. Connect the Black wire from
the fixture to the black house (hot) Wire. Connect the white wire from
the fixture to the white (neutral) house wire. Make sure all wire nuts
are secured. You may wrap the connections with electrical tape. If
your outlet box has a ground wires (green or bare copper) connect
fixture’s ground wire to it. Otherwise attach the bare copper fixture
wire to the green ground screw on the mounting plate.
2. Tuck the wire connections neatly into the post.
Your installation is now complete. Return power to the junction
box and test the fixture.
FIG.1
FIG.2
Need assistance with parts or assembly? Please call customer service
©COPYRIGHT ALL RIGHTS RESERVED.
FIXTURE
WIRES
Black or
Smooth
HOUSE
WIRES
Black(Hot)
Thank you for purchasing a product.
FIXTURE
WIRES
White or
Ribbed
HOUSE
WIRES
White
(Neutral)
FIXTURE
WIRES
Bare
Copper
(Ground)
HOUSE
WIRES
Green or Bare
Copper(Ground)
Loading...