WARN ING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
COPYRIGHT WARNING:
Unauthorized recording of copyrighted materials may infringe on the rights of copyright
owners and be contrary to copyright laws.
The Mains plug is used as the disconnect device. The Mains plug shall remain readily
operable to disconnect the plug in case of an accident.
CAUTION:
• Danger of explosion if the wrong type of batteries are attached. Use only the same t ype of
batteries.
• Do not expose batteries or product to excessive heat such as the inside of a car under
direct sunlight, fire, etc.
While using the compact power adapter, do not wrap it or cover it with a piece of cloth,
and do not place it in confined narrow spaces.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, withi n an equilateral triangle, is intended to alert
the user to the presence of uninsulated “dang erous voltage” within the product’s enclosure,
that may be of sufficient magnitude to cons titute a risk of electric shock to persons.
The exclamation point, within an equilateral triangle, is intended to alert the user to the
presence of important operating and mainten ance (servicing) instructions in the literature
accompanying the product.
2
FCC/IC NOTICE
COPY
HD Camcorder, VIXIA HF R32 / VIXIA HF R30 / VIXIA HF R300 systems
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and use in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the recei ving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experi enced radio/TV technician for help.
Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the
manual. If such changes or modifications should be made, you could be required to stop operation
of the equipment.
Model ID0002 (including WLAN Module Model WM217)
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to
the following two conditions: (1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired operation of the device.
This transmitter must not be co-located or operated in conjunction with any other antenna or
transmitter.
The available scientific evidence does not show that any health problems are associated with using
low-power wireless devices. There is no proof, however, that these low power wireless devices are
absolutely safe. Low-power wireless devices emit low levels of radio frequency energy (RF) in the
microwave range while being used. Whereas high levels of RF can produce health effects (by
heating tissue), exposure to low-level RF that does not produce heating effects causes no known
adverse health effects. Many studies of low-level RF exposures have not found any biological
effects. Some studies have suggested that some biological effects might occur, but such findings
have not been confirmed by additional research. This model has been tested and found to comply
with FCC/IC radiation exposure limits set forth for an uncontrolled equipment and meets the FCC
radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio
frequency (RF) Exposure rules.
Canon U.S.A., Inc.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
Tel No. (516)328-5600
This Class B digital apparatus complies with Canadian ICES-003.
EnFrEs
3
IMPORTANT SAFETY INSTRUCTIONS
COPY
In these safety instructions the word “apparatus” refers to the Canon HD Camcorder
VIXIA HF R32 / VIXIA HF R30 / VIXIA HF R300 and all its accessories.
1Read these instructions.
2Keep these instructions.
3Heed all warnings.
4Follow all instructions.
5Do not use this apparatus near water.
6Clean only with dry cloth.
7Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
8Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
9Only use attachments/accessories specified by the manufacturer.
10 Unplug this apparatus during lightning storms or when unused for long periods of time.
11 Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally, or has been dropped.
CA-110 identification plate is located on the bottom.
4
Precautions About the Battery Pack
COPY
DANGER!
Treat the battery pack with care.
• Keep it away from fire (or it might explode).
• Do not expose the battery pack to temperature higher than 60 °C (140 °F).
Do not leave it near a heater or inside a car in hot weather.
• Do not try to disassemble or modify it.
• Do not drop it or subject it to shocks.
• Do not get it wet.
REGIONS OF USE
VIXIA HF R32 and VIXIA HF R30 are in compliance (as of January 2012) with the radio
signal regulations of the regions listed below. For details on other regions where they
can be used, make inquiries with the contacts listed on the back side of this instruction
manual.
REGIONS
Canada, Hong Kong S.A.R., USA, South Korea
EnFrEs
Model
ID0002: VIXIA HF R30 / VIXIA HF R32
5
Important Note About the Memory
COPY
• Observe the following precautions while the ACCESS indicator is on or
flashing. Failing to do so may result in permanent data loss or damage to
the memory.
- Do not open the memory card slot cover.
- Do not disconnect the camcorder's power source or turn off the
camcorder.
- Do not change the camcorder’s operating mode.
Trademark Acknowledgements
• SD, SDHC and SDXC Logos are trademarks of SD-3C, LLC.
• Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United
States and/or other countries.
• App Store, iPhone, iTunes, Mac OS and Macintosh are trademarks of Apple Inc., registered in the U.S. and
other countries.
• “x.v.Color” and the “x.v.Color” logo are trademarks.
• HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other countries.
• “AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation
and Sony Corporation.
• Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
• YouTube is a trademark of Google Inc.
• Facebook is a registered trademark of Facebook, Inc .
• Wi-Fi is a registered trademark of the Wi-Fi Alliance.
• Wi-Fi Certified, WPA, WPA2, and the Wi-Fi Certified logo are trademarks of the Wi-Fi Alliance.
• WPS as used on the camcorder’s settings, onscreen displays and in this manual signifies Wi-Fi Protected
Setup.
• DLNA, the DLNA Logo and DLNA CERTIFIED are trademar ks, service marks, or certification marks of the
Digital Living Network Alliance.
• Other names and products not mentioned above m ay be trademarks or registered trademarks of their
respective companies.
• This device incorporates exFAT technology licensed from Microsoft.
• “Full HD 1080” refers to Canon camcorders compliant with high -definition video
composed of 1,080 vertical pixels (scanning lines).
• ANY USE OF THIS PRODUCT OTHER THAN CONSUMER PERSONAL USE IN ANY
MANNER THAT COMPLIES WITH THE MPEG-2 STANDARD FOR ENCODING VIDEO INFORMATION FOR
PACKAGED MEDIA IS EXPRESSLY PROHIBITED WITHOUT A LICENSE UNDER APPLICABLE PATENTS IN THE
MPEG-2 PATENT PORTFOLIO, WHICH LICENSE IS AVAILABLE FROM MPEG LA, L.L.C., 250 STEELE STREET,
SUITE 300, DENVER, COLORADO 80206.
• This product is licensed under AT&T patents for the MPEG-4 standard an d may be used for encoding
MPEG-4 compliant video and/or decoding MPEG -4 compliant video that was encoded only (1) for a
personal and non-commercial purpose or (2) by a video provider licensed under the AT&T patents to
provide MPEG-4 compliant video. No license i s granted or implied for any other use for MPEG-4 standard.
6
Package contents
1234
COPY
• CA-110 Compact Power Adapter* [1]
* CA-110E including power cord, in Asia.
• BP-709 Battery Pack
•Stylus pen [2]
• HTC-100/S HDMI Cable [3]
• IFC-300PCU/S USB Cable [4]
• &/% Wi-Fi Basic Setup Guide
•2 Software CD-ROMs
- PIXELA CD-ROM**
&/% Contains VideoBrowser for managing, editing, and playing
back movies, and Network Utility for transferring recordings wirelessly to
a computer.
' Contains Transfer Utility for saving and transferring movies and
music files you can use as background music.
- : VIXIA CD-ROM
Contains the full-version Instruction Manual of the camcorder (PDF file).
See the explanation on next page.
** A printed Startup Guide for PIXELA’s software is also supplied. Refer to this
Startup Guide for details about the supplied software.
EnFrEs
7
Table of Contents
COPY
7Package contents
10Onscreen Icons and Displays
15Charging the Battery Pack
18Basic Preparations
21Setting the Date/Time and Language
23Using a Memory Card
26Shooting Video and Taking Photos
30Playing Back Movies and Viewing Photos
33Playback on a TV Screen
35Saving and Sharing Your Recordings
36Abridged Specifications
About the Camcorder’s Wi-Fi Functions (&/% only)
You can make your camcorder an active part of your Wi-Fi network to fully
enjoy a variety of Wi-Fi functions. While these Wi-Fi functions are beyond the
scope of this Quick Guide, you can read the Wi-Fi Basic Setup Guide
supplied with the camcorder to complete the connection of the camcorder
to your home Wi-Fi network. And you have the complete information in the
full-version Instruction Manual (PDF file*).
About the Camcorder’s PDF Instruction Manual
This guide will get you started and show you how to use the most basic
functions of your camcorder to shoot video, take photos and play back your
recordings (using the camcorder or connecting it to your TV). To learn more
about the more advanced functions of your camcorder, to read important
handling precautions and to consult the troubleshooting section if an error
message is displayed, be sure to read the full-version Instruction Manual
(PDF file*). In this Quick Guide, the ; mark indicates reference page
numbers in the PDF file.
* Adobe® Reader® 6 or later is required to view the PDF Instruction Manual.
8
Installing the Camcorder’s Instruction Manual (PDF file)
COPY
1 Turn on the computer.
2 Insert the VIXIA CD-ROM into the computer’s disc drive.
3 Windows: Open the drive into which you inserted the CD-ROM
using Windows Explorer.
Mac OS: Use Finder and click on the CD-ROM icon.
4 Click/Double-click the Disc_Setup.exe icon.
5 In the installer panel, click [Instruction Manual of the
Camcorder] and select your language.
6 When the installation is complete, click [OK], then [Exit].
The installer will save the camcorder’s Instruction Manual (PDF file) on
the computer and will create a shortcut icon on the desktop for easy
access.
EnFrEs
9
introduction
COPY
Onscreen Icons and Displays
Recording movies (using Story Creator)
1 Control button [FUNC.]: Open the [Main Functions] panel (; 28)
2 Smart AUTO (A 27)
3 Face detection frame (; 99)
4 Touch & Track frame: Touch a moving subject on the screen to keep it
clearly in focus at all times. (; 101)
5 Control button [PHOTO] - Take a photo (A 26)
6 Control button [?]: Displays a shooting tip for the current story scene
7 Memory operation (; 186)
8 Intelligent IS (; 48)
9 Remaining battery level
- If the icon appears in yellow
or red, the battery pack is
almost empty. Replace
with a fully charged battery pack.
Aq Zoom (A 27)
Aa Recording mode (A 25)
As Recording standard (A 20)
Ad Current story scene (; 68)
Af Recommended scene length (; 68)
Ag Decoration: Add a fun personal touch using stamps, drawings, image mix
and more. (; 73)
100%75%50%25%0%
10
Onscreen Icons and Displays
COPY
Recording movies
Manual mode Cinema mode
Ah Recording program: Recording programs allow you to change various
picture-related settings to your preference, or to use a special scene
recording program to apply the camcorder settings most appropriate for
a variety of situations. (; 95)
Aj Manual exposure: Correct the exposure manually for a picture darker/
brighter than the one obtained using the automatic exposure set by the
camcorder. (; 103)
Ak Manual focus (; 104)
Al Face detection: You can have the camcorder automatically detect people’s
faces and use this information to adjust the focus and set the best
exposure and color control settings for beautiful videos and photos.
(; 99)
Sq White balance: Change the setting so different lighting conditions do not
affect the colors in your recordings and white objects look truly white.
(; 107)
Sa Audio level indicator: Manually adjust the audio recording level.
(; 109)
Ss x.v.Color: The camcorder uses a color space with an extended gamut to
achieve deeper colors, closer to real life. (; 176)
Sd While recording/during playback: Scene counter (hours : minutes :
seconds); < Self timer (; 108)
Sf Image stabilizer (; 97)
Sg Tele macro (; 106)
EnFrEs
11
Onscreen Icons and Displays
COPY
Sh Remaining recording time
* On the memory card; & In the built-in memory*
( Relay recording (; 41)*
- When there is no more free space on the memory, [& End] (built-in
memory*) or [* End] (memory card) will be displayed in red and
recording will stop.
* &/% only.
Sj Frame rate (; 94)
Sk Fader (; 102)
Sl Microphone attenuator: Use the attenuator to avoid audio distortions when
the sound is too loud. (; 173)
Dq Headphone output (; 111)
Da Custom control button (; 180)
Ds Level marker: Display onscreen markers to check your composition and
make sure horizontal or vertical lines do not appear crooked in your
recordings. (; 173)
Dd Wind screen off: Wind screen removes the background sound of wind when
recording outdoors. You may want to turn it off when recording indoors in
very quiet surroundings. (; 173)
Df Flicker reduction (; 173)
Dg Control button [FILTER 1] - Cinema-look filters: Use cinema-look filters to
create unique movies with distinctive looks. (; 70)
Dh In record pause mode: Total number of scenes
Dj Pre-recording: The camcorder will start recording video 3 seconds before
you press Y, so you do not miss important shooting
opportunities. (; 98)
12
Loading...
+ 28 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.