Canon project monitoring User Manual

Projector Monitoring Software Version 1.1

Frequently Asked Questions

What are the minimum requirements to run the software?

Category Essential Requirements

Microsoft Windows XP Professional SP2 or later Microsoft Windows Vista Ultimate

Supported Languages Japanese, English CPU

Intel Pentium 4

2.4 GHz or better

Memory 1GB or more Display XGA or more

.NET Framework

Windows XP: .NET Framework 2.0 SP1 or more Windows Vista: .NET Framework 3.0 or more

What Canon projectors are compatible with the software?

Currently, the software will work with the following projectors:

 WUX10 Mark II D  WUX10 Mark II  SX80 Mark II D  SX80 Mark II  LV-8310  LV-8215  LV-7385  LV-7380  LV-7285  LV-7280

Will the software be compatible with new projectors not yet available?

Our entire list of projectors can be seen online att www.usa.canon.com/projectors

. All projectors that are

compatible with the software will have the software listed under the Drivers & Downloads tab.

What exactly does the software allow me to do?

The software allows the user to monitor and manage network-connected compliant Canon projectors, displaying operating conditions and maintenance information of up to 254 projectors. The software will not allow you to operate the projectors remotely.

Can the software be run by through the serial port on the projectors?

The projectors must be connected to your local network through the RJ-45 network ports on the projectors, in order for them to be seen by the software.

When I view my list of projectors, several are listed with a warning, but nothing is displayed to indicate what the issue is. How do I find out what is wrong?

Double click on the projectors with warnings, and the exact nature of the warning will be displayed.

Does the software come with a manual?

Yes, the manual is in PDF format, and Adobe Reader version 7.0 or higher is needed to view the manual.