Canon IXUS 1100 HS, PowerShot ELPH 510 HS User Guide

Camera User Guide

COPY

• Make sure you read this guide, including the “Safety
Precautions” section, before using the camera.

• Reading this guide will help you learn to use the camera
properly.

• Store this guide safely so that you can use it in the future.

ENGLISH

Checking the Package Contents

COPY

Check if the following items are included in your camera package.
If anything is missing, contact the retailer where you purchased the camera.

Camera Battery Pack NB-9L

Interface Cable

IFC-400PCU

Getting Started

(with Terminal Cover)

DIGITAL CAMERA

Solution Disk

Wrist Strap

WS-DC10

Battery Charger

CB-2LB/CB-2LBE

Warranty

Card

Using the PDF Manuals

The following PDF manuals are included in the Readme folder of the CD­ROM:
When the software is installed on your computer, the PDF manuals will be
copied to the computer and you can refer to them by clicking the shortcuts
on the desktop.

• Camera User Guide (This Guide)

Once you have mastered the basics, use the
camera’s many features to shoot more challenging
photos.

• Software Guide

Read when you want to use the included software.

• A memory card is not included (p. 17).

• Adobe Reader is required to view the PDF manuals.

2

Read This First

COPY

• Take some initial test shots and play them back to make sure the images

were recorded correctly. Please note that Canon Inc., its subsidiaries and
affiliates, and its distributors are not liable for any consequential damages
arising from any malfunction of a camera or accessory, including memory
cards, that results in the failure of an image to be recorded or to be
recorded in a way that is machine readable.

• The images recorded with this camera are intended for personal use. Do

not record images that infringe upon copyright laws without the prior
permission of the copyright holder. Please be advised that in certain cases
the copying of images from performances, exhibitions, or commercial
properties by means of a camera or other device may contravene copyright
or other legal rights even if the image was shot for personal use.

• This camera’s warranty is only effective in the country of sale. If there is a

problem with the camera while abroad, please return it to the country of
sale before proceeding with a warranty claim to a Canon Customer
Support Help Desk. For Canon Customer Support contacts, please see the
customer support list supplied with your camera.

• The LCD monitor is produced with extremely high-precision manufacturing

techniques. More than 99.99% of the pixels operate to specification, but
occasionally non-performing pixels may appear as bright or dark dots. This
is not a malfunction and has no effect on the recorded image.

• The LCD monitor may be covered with a thin plastic film for protection

against scratches during shipment. If covered, remove the film before
using the camera.

• Please take care when operating the camera for an extended period as the

camera body may become warm. This is not a malfunction.

Conventions Used in This Guide

• Icons are used in the text to represent the camera buttons and switches.

• Language that displays on the screen appears inside [ ] (square brackets).

• : Things you should be careful about

• : Troubleshooting tips

• : Hints for getting more out of your camera

• : Supplemental information

• (p. xx): Reference pages (“xx” stands for a page number)

• This guide assumes all functions are at their default settings.

• The various types of memory cards that can be used in this camera are

collectively referred to as memory cards in this guide.

3

What Do You Want to Do?

COPY

4 Shoot

z Shoot, leaving it to the camera to make settings .......................... 26

Take good people shots

I

Portraits

(p. 62)

Shoot various other scenes

Night Scenes

(p. 63)

Shoot with special effects

Vivid Colors (p. 65) Poster Effect

V

Kids and Pets

(p. 63)

At the Beach

Low Light

(p. 63)

w

(p. 63)

P

Against Snow

(p. 64)

O t

Foliage

(p. 64)

(p. 65)

Facial Expressions

(p. 80)

Fireworks

(p. 64)

Fish-eye Effect

(p. 66)

Miniature Effect

(p. 67)

z Focus on faces ................................................................. 26, 62, 93

z Shoot in places where I cannot use the flash (turn off the flash) .. 52

z Take pictures with me in them too (self-timer)........................ 55, 76

z Insert the date and time into my shots.......................................... 54

z Shoot a movie clip just before taking a picture ............................. 72

Toy Camera Effect

(p. 68)

Monochrome

(p. 69)

4

What Do You Want to Do?

COPY

1 View

z Look at my pictures ...................................................................... 30

z Automatically play back pictures (slideshow) ............................. 116

z Look at my pictures on a TV....................................................... 170

z Look at my pictures on a computer .............................................. 36

z Quickly search pictures .............................................................. 112

z Erase pictures....................................................................... 32, 127

E Shoot/View Movies

z Shoot movies........................................................................ 33, 103

z View movies ................................................................................. 35

z Shoot fast moving subjects and play them back in slow motion... 106

c Print

z Print pictures............................................................................... 140

Save

z Save images to a computer.......................................................... 36

3 Other

z Turn off sounds............................................................................. 48

z Use the camera abroad ........................................................ 17, 159

z Understand what is displayed on the screen.............................. 183

5

Table of Contents

COPY

Checking the Package Contents .......2

Read This First ..................................3

Conventions Used in This Guide .......3

What Do You Want to Do? ................4

Table of Contents ..............................6

Safety Precautions.............................9

1

Getting Started .................13

Using the Touch Panel ....................14

Charging the Battery ........................15

Compatible Memory Cards

(Sold Separately) ...........................17

Inserting the Battery.........................18

Inserting the Memory Card ..............19

Setting the Date and Time ...............21

Setting the Display Language..........23

Formatting Memory Cards ...............24

Pressing the Shutter Button .............25

Taking Pictures (Smart Auto)...........26

Viewing Images ...............................30

Active Display ..................................31

Erasing Images ................................32

Shooting Movies ..............................33

Viewing Movies ................................35

Transferring Images to a Computer

for Viewing.....................................36

2

Learning More ..................41

Components Guide..........................42

Screen Display.................................43

Indicator ...........................................44

FUNC. Menu – Basic Operations ....45

MENU – Basic Operations ...............46

Adjusting the Screen Brightness......47

Changing the Sound Settings..........48

Returning the Camera to Default

Settings ......................................... 49

Power Saving Function

(Auto Power Down) ....................... 50

3

Shooting with Commonly

Used Functions ................51

Turning the Flash Off ...................... 52

Zooming In More Closely on

Subjects (Digital Zoom)................. 53

Inserting the Date and Time ............ 54

Using the Self-Timer ....................... 55

Changing the Aspect Ratio ............. 57

Changing the Recording Pixel

Setting (Image Size) ..................... 58

Changing the Compression Ratio

(Image Quality) ............................. 58

4

Adding Effects and
Shooting in Various

Conditions ........................61

Shooting in Various Conditions....... 62

Adding Effects and Shooting........... 65

Making Short Movies Automatically

(Movie Digest) ............................... 72

Detecting a Face and Shooting

(Smart Shutter) ............................. 74

Shooting Long Exposures............... 78

High-Speed Continuous Shooting

(High-speed Burst) ........................ 79

Capturing the Best Facial

Expressions (Best Image

Selection) ...................................... 80

6

Table of Contents

COPY

5

Choosing Settings

Yourself............................. 81

Shooting in Program AE ................. 82

Adjusting the Brightness

(Exposure Compensation) ............ 83

Turning the Flash On ...................... 83

Adjusting the White Balance ........... 84

Changing the ISO Speed................ 86

Correcting the Brightness and

Shooting (i-Contrast)..................... 87

Continuous Shooting....................... 88

Changing the Tone of an Image

(My Colors) ................................... 89

Shooting Close-ups (Macro) ........... 91

Shooting Far Away Subjects

(Infinity) ......................................... 91

Changing the AF Frame Mode........ 93

Magnifying the Focal Point.............. 95

Choosing the Subject to Focus On

(Touch AF).................................... 96

Shooting with the AF Lock .............. 97

Shooting with Servo AF .................. 97

Changing the Metering Method....... 98

Shooting with the AE Lock .............. 99

Shooting with the FE Lock .............. 99

Shooting with Slow Synchro ......... 100

Red-Eye Correction ...................... 101

Checking for Shut Eyes ................ 102

6

Using Various Functions for

Shooting Movies ............103

Shooting Various Kinds of

Movies ........................................ 104

Shoot Movies That Look Like a

Miniature Model

(Miniature Effect) ........................ 105

Shooting Super Slow Motion

Movies......................................... 106

Using the Wind Filter .....................107

Changing the Image Quality.......... 108

Other Shooting Functions.............. 109

Editing ........................................... 109

7

Using Various Playback and

Editing Functions........... 111

Quickly Searching Images............. 112

Viewing Images in Filtered

Playback...................................... 115

Viewing Slideshows....................... 116

Checking the Focus....................... 118

Magnifying Images ........................ 119

Viewing Each Image in a Group....120

Displaying Various Images

(Smart Shuffle) ............................ 122

Changing Image Transitions .........123

Easy Operations with Touch

Actions ........................................ 123

Protecting Images ......................... 125

Erasing Images .............................127

Tagging Images as Favorites........129

Organizing Images by Category

(My Category) .............................131

Rotating Images ............................132

Resizing Images............................ 133

Trimming ....................................... 134

Adding Effects with the My Colors

Function ...................................... 136

Correcting the Brightness

(i-Contrast) .................................. 137

Correcting the Red-Eye Effect.......138

7

Table of Contents

COPY

8

Printing............................139

Printing Images ..............................140

Choosing Images for Printing

(DPOF) ........................................147

Choosing Images for

a Photobook ................................151

9

Customizing Camera

Settings ...........................153

Changing Camera Settings............154

Changing Shooting Function

Settings........................................162

Changing Playback Function

Settings........................................168

10

Useful Information .........169

Viewing Images on a TV ............... 170

Using Household Power................ 174

Using an Eye-Fi Card .................... 175

Troubleshooting ............................ 177

List of Messages That Appear

on the Screen.............................. 180

Information Displayed

on the Screen.............................. 183

Functions and Menu Lists ............. 188

Playback Mode FUNC. Menu........ 196

Handling Precautions .................... 197

Specifications ................................ 198

Accessories ................................... 202

Separately Sold Accessories ........ 203

Index ............................................. 205

8

Safety Precautions

COPY

• Before using the product, please ensure that you read the safety precautions described

below. Always ensure that the product is used correctly.

• The safety precautions noted on the following pages are intended to prevent injuries to

yourself and other persons, or damage to the equipment.

• Be sure to also check the guides included with any separately sold accessories you

use.

Warning

• Do not trigger the flash in close proximity to people’s eyes.

Exposure to the intense light produced by the flash could damage eyesight. In particular,
remain at least 1 meter (39 inches) away from infants when using the flash.

• Store this equipment out of the reach of children and infants.

Strap: Putting the strap around a child’s neck could result in asphyxiation.

• Use only recommended power sources.

• Do not attempt to disassemble, alter or apply heat to the product.

• Avoid dropping or subjecting the product to severe impacts.

• To avoid the risk of injury, do not touch the interior of the product if it has been

dropped or otherwise damaged.

• Stop using the product immediately if it emits smoke, a strange smell, or

otherwise behaves abnormally.

• Do not use organic solvents such as alcohol, benzine, or thinner to clean the

product.

• Do not let the product come into contact with water (e.g. sea water) or other

liquids.

• Do not allow liquids or foreign objects to enter the camera.

This could result in electrical shock or fire.
If liquids or foreign objects come into contact with the camera interior, immediately turn
the camera off and remove the battery.
If the battery charger becomes wet, unplug it from the outlet and consult your camera
distributor or a Canon Customer Support Help Desk.

• Use only the recommended battery.

• Do not place the battery near or in direct flame.

• Unplug the power cord periodically, and using a dry cloth, wipe away any dust

and dirt that has collected on the plug, the exterior of the power outlet, and the
surrounding area.

• Do not handle the power cord with wet hands.

• Do not use the equipment in a manner that exceeds the rated capacity of the

electrical outlet or wiring accessories. Do not use if the power cord or plug are
damaged, or not fully plugged into the outlet.

• Do not allow dirt or metal objects (such as pins or keys) to contact the terminals

or plug.

The battery may explode or leak, resulting in electrical shock or fire. This could cause
injury and damage the surroundings. In the event that a battery leaks and the battery
electrolyte contacts eyes, mouth, skin or clothing, immediately flush with water.

Denotes the possibility of serious injury or death.

9

Safety Precautions

COPY

• Turn the camera off in places where camera use is prohibited.

The electromagnetic waves emitted by the camera may interfere with the operation of
electronic instruments and other devices. Exercise adequate caution when using the
camera in places where use of electronic devices is restricted, such as inside airplanes
and medical facilities.

• Do not play the supplied CD-ROM(s) in any CD player that does not support data

CD-ROMs.

It is possible to suffer hearing loss from listening with headphones to the loud sounds of
a CD-ROM played on an audio CD player (music player). Additionally, this could damage
the speakers.

Caution

• When holding the camera by the strap, be careful not to bang it, subject it to

strong impacts or shocks, or let it get caught on other objects.

• Be careful not to bump or push strongly on the lens.

This could lead to injury or damage the camera.

• When using the flash, be careful not to cover it with your fingers or clothing.

This could result in burns or damage to the flash.

• Avoid using, placing or storing the product in the following places:

- Places subject to strong sunlight

- Places subject to temperatures above 40 °C (104 °F)

- Humid or dusty areas

These could cause leakage, overheating or an explosion of the battery, resulting in
electrical shock, fire, burns or other injuries.
High temperatures may cause deformation of the camera or battery charger casing.

• The slideshow transition effects may cause discomfort when viewed for

prolonged periods.

Caution

• Do not aim the camera at bright light sources (such as the sun on a clear day).

Doing so may damage the image sensor.

• When using the camera on a beach or at a windy location, be careful not to allow

dust or sand to enter the camera.

This may cause the product to malfunction.

• In regular use, small amounts of smoke may be emitted from the flash.

This is due to the high intensity of the flash burning dust and foreign materials stuck to the
front of the unit. Please use a cotton swab to remove dirt, dust or other foreign matter from
the flash to prevent heat build-up and damage to the unit.

Denotes the possibility of injury.

Denotes the possibility of damage to the equipment.

10

Safety Precautions

COPY

• Remove and store the battery when you are not using the camera.

If the battery is left inside the camera, damage caused by leakage may occur.

• Before you discard the battery, cover the terminals with tape or other insulators.

Contacting other metal materials may lead to fire or explosions.

• Unplug the battery charger from the power outlet after charging is complete, or

when you are not using it.

• Do not place anything, such as cloth on top of the battery charger while it is

charging.

Leaving the unit plugged in for a long period of time may cause it to overheat and distort,
resulting in fire.

• Do not place the battery near pets.

Pets biting the battery could cause leakage, overheating or explosion, resulting in fire or
damage.

• Do not sit down with the camera in your pocket.

Doing so may cause malfunctions or damage the screen.

• When putting the camera in your bag, ensure that hard objects do not come into

contact with the screen.

• Do not attach any hard objects to the camera.

Doing so may cause malfunctions or damage the screen.

11

12

COPY

1

COPY

Getting Started

This chapter explains preparations before shooting, how to shoot in
A mode, and then how to view and erase the images you take. The

latter part of this chapter explains how to shoot and view movies and

transfer images to a computer.

Attaching the Strap/Holding the Camera

• Attach the included strap and wrap it around your wrist to avoid dropping

the camera during use.

• Keep your arms tight against your body while holding the camera firmly by

the sides when shooting. Be sure that your fingers do not block the flash or
touch the screen.

Strap

13

Using the Touch Panel

COPY

This camera has a touch panel screen that allows you to perform operations
with the touch of your finger.

Touch

Briefly touch the screen with your
finger.

z Used for operations such as making

various settings or shooting.

Drag

Touch and drag your finger across
the screen.

z Used for playback operations such as

switching to the next image, or moving the
displayed location of magnified images.

Since the camera uses a pressure sensitive touch panel, the camera may
not recognize touch operations if you install a screen protector.

What if I cannot perform operations well?

14

When touching with your finger does not work well,
you can use the toggle attached to the strap to
perform operations. Only use the attached toggle to
perform operations. Do not use other objects, such
as pens or pencils.
You can calibrate the touch panel if you are having
difficulty choosing items or buttons (p. 161).

Charging the Battery

COPY

Use the included charger to charge the battery. Be sure to charge the battery
as it is not charged at the time of purchase.

Remove the cover.

Insert the battery.

z Align the S marks on the battery and

charger, then insert the battery by sliding it
in ( ) and down ( ).

Charge the battery.

z For CB-2LB: Flip out the plug ( ) and

plug the charger into a power outlet ( ).

CB-2LB

CB-2LBE

z For CB-2LBE: Plug the power cord into

the charger, then plug the other end into a
power outlet.

X The CHARGE lamp lights and charging

starts.

X The FULL lamp will light when charging

has finished. Charging takes approx. 1
hour and 50 minutes.

Remove the battery.

z Unplug the battery charger from the power

outlet, then remove the battery by sliding it
in ( ) and up ( ).

To protect the battery and prolong its life, do not charge it for longer than
24 hours continuously.

15

Charging the Battery

COPY

Number of Possible Shots/Shooting and Playback Times

Number of Shots*

Movie Shooting Time

*1 The number of shots that can be taken is based on the Camera & Imaging Products

Association (CIPA) measurement standard.

*2 Times are based on default settings, starting and stopping shooting, turning the camera on

and off, and operations such as using the zoom.

*3 Times are based on repeatedly shooting until the maximum clip length is reached or recording

stops automatically.

• Under some shooting conditions, the number of possible shots and shooting time may

be less than mentioned above.

Playback Time

1

2

*

Continuous

*

Shooting

Approx. 170

Approx. 30 minutes

3

Approx. 50 minutes

Approx. 4 hours

Battery Charge Indicator

An icon or message will appear on the screen indicating the battery’s charge
state.

Display Summary

Sufficient charge.

Slightly depleted, but sufficient.

(Blinking red) Nearly depleted. Charge the battery.

“Change the battery pack.” Depleted. Charge the battery.

What if...

• What if the battery develops a bulge?

This is a normal characteristic of the battery and does not indicate a problem.
However, if the battery bulges to the point where it will no longer fit into the
camera, please contact a Canon Customer Support Help Desk.

• What if the battery is quickly depleted even after charging?

The battery has reached the end of its life span. Purchase a new battery.

16

Compatible Memory Cards (Sold Separately)

COPY

Using the battery and charger effectively

• Charge the battery on the day, or the day before, it will be used.

Charged batteries continue to discharge naturally even if they are not used.

• How to store the battery for long periods:

Deplete and remove the battery from the camera. Attach the terminal cover and
store the battery. Storing a battery for long periods of time (about a year) without
depleting it may shorten its life span or affect its performance.

• The battery charger can also be used when abroad.

The charger can be used in regions that have 100 – 240 V (50/60 Hz) AC power.
If the plug does not fit the outlet, use a commercially available plug adapter. Do
not use electrical transformers for foreign travel as they will cause damage.

Compatible Memory Cards (Sold
Separately)

The cards below can be used without restrictions on their capacities.

• SD memory cards*

• SDHC memory cards*

• SDXC memory cards *

• Eye-Fi cards

* This memory card complies with SD standards. Some cards may not operate properly

depending on the brand of card used.

Depending on your computer’s OS version, SDXC memory cards may not
be recognized even when using a commercially available card reader.
Check to make sure that your OS supports SDXC memory cards
beforehand.

About Eye-Fi Cards

This product is not guaranteed to support Eye-Fi card functions (including
wireless transfer). In case of an issue with an Eye-Fi card, please check with
the card manufacturer.
Also note that an approval is required to use Eye-Fi cards in many countries
or regions. Without approval, use of the card is not permitted. If it is unclear
whether the card has been approved for use in the area, please check with
the card manufacturer.

17

Inserting the Battery

COPY

Insert the included battery.

Open the cover.

z Slide the cover ( ) and open it ( ).

Insert the battery.

z Press the battery lock in the direction of the

z Be sure to insert the battery in the correct

arrow, then insert the battery as shown
until it locks into place with a click.

direction or it will not properly lock into
place.

Terminals Battery

Removing the Battery

18

Lock

Close the cover.

z Close the cover ( ), and press downward

as you slide it until it clicks into place ( ).

z Open the cover and press the battery lock

in the direction of the arrow.

X The battery will pop up.

Inserting the Memory Card

COPY

Insert a memory card (sold separately).

Check the card’s write-protect tab.

z If the memory card has a write-protect tab,

you will not be able to record images if the
tab is in the locked position. Slide the tab
up until you hear a click.

Open the cover.

z Slide the cover ( ) and open it ( ).

Insert the memory card.

z Insert the memory card as shown until it

locks into place with a click.

z Be sure the memory card is oriented

correctly. Inserting the memory card in the
wrong direction could damage the camera.

Terminals

Close the cover.

z Close the cover ( ) and press downward

as you slide it until it clicks into place ( ).

Removing the Memory Card

z Open the cover and push the memory card

in until you hear a click, then slowly release
it.

X The memory card will pop up.

19

Inserting the Memory Card

COPY

What if [Memory card locked] appears on the screen?

If the write-protect tab is in the locked position, [Memory card locked] will appear
on the screen and you will not be able to take or erase images.

Number of Shots per Memory Card

Memory Card

Number of Shots

• Values are based on the default settings.

• The number of shots that can be taken will vary depending on camera settings, the

subject and the memory card used.

Can you check the number of shots that can be taken?

4GB 16GB

Approx. 1231 Approx. 5042

You can check the number of shots that can be
taken when the camera is in a Shooting mode
(p. 26).

20

Setting the Date and Time

COPY

The Date/Time settings screen will appear the first time the camera is turned
on. Since the dates and times recorded into your images are based on these
settings, be sure to set them.

Turn on the camera.

z Press the power button.

X The Date/Time screen will appear.

Set the date and time.

z Touch the option you want to set.

X op will appear.

z Touch op to set a value.

Complete the setting.

z Touch ^.

X Once the date and time have been set, the

Date/Time screen will close.

z Pressing the power button will turn off the

camera.

Reappearing Date/Time screen

Set the correct date and time. If you have not set the date and time, the Date/Time
screen will appear each time you turn on the camera.

Daylight saving time settings

If you touch in Step 2 and then choose , you will set the time to daylight
saving (1 hour ahead).

21

Setting the Date and Time

COPY

Changing the Date and Time

You can change the current date and time settings.

Display the menu.

z Touch H, then touch n.

Choose [Date/Time].

z Touch the 3 tab.
z Drag up or down the screen to choose

[Date/Time].

z Touch [Date/Time].

Change the date and time.

z Follow Steps 2 and 3 on p. 21 to adjust the

settings.

z Touch ^ twice to close the menu.

Date/Time battery

• The camera has a built-in date/time battery (backup battery) that allows the

date/time settings to be retained for about 3 weeks after the battery pack has
been removed.

• By inserting a charged battery or connecting an AC adapter kit (sold separately,

p. 203) the date/time battery can be charged in about 4 hours even if the camera
is not turned on.

• If the date/time battery is depleted, the Date/Time screen will appear when you

turn the camera on. Follow the steps on p. 21 to set the date and time.

22

Setting the Display Language

COPY

You can change the language that displays on the screen.

Enter Playback mode.

z Press the 1 button.

Display the settings screen.

z Touch and hold n.

X The settings screen will appear.

Set the display language.

z Touch a display language, then touch ^.

X Once the display language has been set,

the settings screen will close.

What if n does not appear?

When there are images on the memory card, touch H on the lower left of the
screen to display n.

You can also change the display language by touching H, then
n. Choose the 3 tab in the screen that appears, then choose the
[Language ] menu item.

23

Formatting Memory Cards

COPY

Before you use a new memory card or one that has been formatted in other
devices, you should format the card with this camera. Formatting (initializing)
a memory card erases all data on the memory card. As you cannot retrieve
the erased data, exercise adequate caution before formatting the memory
card.
Before formatting an Eye-Fi card (p. 175), be sure to install the software
contained on the card to a computer.

Display the menu.

z Touch H, then touch n.

Choose [Format].

z Touch the 3 tab.
z Drag up or down the screen to choose

[Format].

z Touch [Format].

Choose [OK].

z Touch [OK].

X A confirmation screen will appear.

24

Format the memory card.

z Touch [OK] to start formatting the memory

card.

z When formatting ends, [Memory card

formatting complete] appears on the
screen. Touch [OK].

Pressing the Shutter Button

COPY

Formatting or erasing data on a memory card merely changes the file
management information on the card and does not ensure its contents are
completely erased. Be careful when transferring or disposing of a memory
card. When disposing of a memory card, take precautions such as
physically destroying the card to prevent personal information leaks.

• The total capacity of the memory card displayed in the formatting screen

may be less than indicated on the memory card.

• Perform a low-level format (p. 155) of the memory card when the camera

does not operate properly, the recording/reading speed of a memory card
has dropped, when continuous shooting speed slows down, or when
movie recording stops suddenly.

Pressing the Shutter Button

To take images that are in focus, be sure to first press the shutter button
lightly (halfway) to focus, then press fully to shoot.

Press halfway (Press lightly to focus).

z Press lightly until the camera beeps twice

and AF frames appear where the camera
focused.

Press fully (Press fully to shoot).

The camera plays the shutter sound and

X

takes the shot.

z Since the shot is being taken while the

shutter sound plays, be careful not to move
the camera.

Does the length of the shutter sound change?

• Since the time required to shoot differs depending on the scene you want to

take, the length of the shutter sound may change.

• If the camera or subject moves while the shutter sound is playing, the recorded

image may be blurry.

If you shoot without pressing the shutter button halfway, the image may not
be in focus.

25

Taking Pictures (Smart Auto)

COPY

Since the camera can determine the subject and shooting conditions, you can
let it automatically select the best settings for the scene and just shoot.

Turn on the camera.

z Press the power button.

X The start-up screen will appear.

Enter A mode.

z Set the mode switch to A.
z When you point the camera toward the

subject, the camera will make a slight
noise as it determines the scene.

X The icon for the determined scene will

appear in the upper left of the screen, while
the icon for image stabilization will appear
in the upper right (pp. 184, 185).

X The camera will focus on detected

subjects and display frames on them.

X Black bars will appear on the sides of the

screen. These areas will not be recorded
when shooting.

Compose the shot.

z Moving the zoom lever toward i

(telephoto) will zoom in on your subject,
making it appear larger. Moving the lever

Zoom Bar

toward j (wide angle) will zoom out from
your subject, making it appear smaller.
(The zoom bar showing the zoom position
appears on the screen.)

Focus.

z Press the shutter button halfway to focus.

26

Taking Pictures (Smart Auto)

COPY

X When the camera focuses, it will beep

twice and AF frames will appear where the
camera focused.
Several AF frames will appear when the
camera focuses on more than 1 point.

AF Frame

Shoot.

z Press the shutter button fully to shoot.

X The camera will play the shutter sound and

shoot. The flash will automatically fire in
low light conditions.

X The image will appear on the screen for

approximately 2 seconds.

z You can take a second picture even while

an image is displayed by pressing the
shutter button again.

Touching the Screen to Shoot (Touch Shutter)

By simply touching the screen the camera will focus on your subject and
adjust the brightness for easy shooting.

Activate the Touch Shutter
function.

z Touch , it will change to .

Choose the subject to focus on.

z Touch and hold your finger on the subject

on the screen.

z When the camera focuses on the subject,

it will beep twice.
A blue frame appears and the focus and
exposure will continuously adjust (Servo
AF).

27

Taking Pictures (Smart Auto)

COPY

Shoot.

z When you remove your finger from the

screen, the camera plays the shutter
sound and takes the shot.

z To deactivate the Touch Shutter function,

touch . It will change to .

• The Touch Shutter function operates in the same way as when pressing

the shutter button.

• You can also make Touch Shutter settings by touching H then

n, to choose [Touch Shutter] in the 4 tab.

• You can take a second picture even while the image you shot is displayed

by touching ^.

Choosing the subject to focus on (Touch AF)

When the Touch Shutter function is deactivated ( ), touch the subject
appearing on the screen to display . Press and hold the shutter button halfway
to display a blue frame where focus and exposure will be maintained (Servo AF).
Press the shutter button fully to shoot.

What if...

• What if the color and brightness of the images do not turn out as

expected?

The scene icon (p. 184) that appears on the screen may not match the actual
scene, and you may not obtain the expected results. If this happens, try
shooting in G mode (p. 81).

• What if white and gray frames appear when you point the camera toward

a subject?

A white frame appears on the face or subject that the camera detected as the
main subject, while gray frames appear on other detected faces. The frames will
follow the subjects within a certain range.
If the subject moves, however, the gray frames will disappear, leaving only the
white frame.

• What if a frame does not appear on the subject you want to shoot?

The subject may not be detected, and frames may appear on the background.
If this happens, try shooting in G mode (p. 81).

28

Taking Pictures (Smart Auto)

COPY

• What if a blue frame appears when you press the shutter button halfway?

A blue frame appears when a moving subject is detected; the focus and
exposure will continuously adjust (Servo AF).

• What if a flashing appears?

Attach the camera to a tripod so that the camera does not move and blur the
image.

• What if the image comes out dark even if the flash fired when shooting?

The subject is too far away for the flash to reach. The effective flash range is
approximately 30 cm – 3.1 m (12 in. – 10.2 ft.) at maximum wide angle (j),
and approximately 1.0 – 1.7 m (3.3 – 5.6 ft.) at maximum telephoto (i).

• What if the camera beeps once when the shutter button is pressed

halfway?

Your subject may be too close. When the camera is at maximum wide angle
(j), move about 1 cm (0.4 in.) or more away from your subject and shoot.
Move about 1 m (3.3 ft.) or more away when the camera is at maximum
telephoto (i).

• What if the lamp lights when the shutter button is pressed halfway?

To reduce red-eye and to assist in focusing, the lamp may light when shooting
in low light conditions.

• What if the h icon blinks when you try to shoot?

The flash is charging. You can shoot when recharging ends.

Icons that appear on the screen

The icon for the determined scene, and the IS mode icon will appear on the
screen. For details on the icons that appear, see “Scene Icons” (p. 184) and “IS
Mode Icons” (p. 185).

29

Viewing Images

COPY

You can view the images you have taken on the screen.

Enter Playback mode.

z Press the 1 button.

X The last image you took will appear.

Choose an image.

z Dragging left to right across the screen will

cycle through the images in the reverse
order they were taken, from the newest
image to the oldest.

z Dragging right to left across the screen will

cycle through images in the order they
were taken, from oldest to newest.

z If you touch the left edge of the screen

(inside frame on the screen at the left),
q will appear and images will display in the
reverse order they were taken, from the
newest image to the oldest.

z If you touch the right edge of the screen

(inside frame on the screen at the left),
r will appear and images will display in the
order they were taken, from oldest to
newest.

z The images change more quickly if you

touch and hold qr, but they will appear
coarse.

z The lens will retract after approximately 1

minute elapses.

z Pressing the 1 button again while the

lens is retracted will turn the camera off.

Switching to Shooting mode

Pressing the shutter button halfway while in Playback mode switches the camera
to Shooting mode.

30

Active Display

COPY

When an image is displayed, lightly tapping the camera as shown below will
switch to the next image.

• Be sure to put the strap around your wrist, and hold the camera firmly to

avoid dropping it.

• Depending on the way you tap the camera, images may not switch.

Switch to next image Switch to previous image

Tilt the camera to switch images

If you touch and hold q on the left of the screen and
tilt the camera as shown while switching through
images (p. 30), the images advance quickly. Tilt the
camera in the opposite direction while holding r.

When switching images by dragging them, or by touching and holding q or
r, the images will appear coarse.

31

Erasing Images

COPY

You can choose and erase images one at a time. Please note that erased
images cannot be recovered. Exercise adequate caution before erasing an
image.

Enter Playback mode.

z Press the 1 button.

X The last image you took will appear.

Choose an image to erase.

z Drag across the screen to choose an

image.

Erase the image.

z After touching H, drag up or down the

screen to choose a, then touch the menu
item again.

z When [Erase?] appears on the screen,

touch [Erase].

X The displayed image will be erased.

z To exit instead of erasing, touch [Cancel].

You can also use Touch Actions to erase images (p. 123).

32

Shooting Movies

COPY

The camera will determine the subject and shooting conditions, and select the
best settings for the scene. The audio will record in stereo.
If you continue shooting for a long time, the camera may become warm. This
is not a malfunction.

Remaining Time

Elapsed Time

Microphones

Enter A mode and compose the
shot.

z Follow Steps 1 – 3 on p. 26 to compose the

shot.

z You can check the amount of time you can

shoot on the screen.

Shoot.

z Touch .
z The display will switch to full-screen, and

the area displayed on the screen will be
recorded.

X The camera will beep once, recording will

start, and [ Rec] and the elapsed time will
appear on the screen.

z If you change the composition of your shot

during shooting, the focus, brightness and
tone will automatically adjust.

z

Do not touch the microphones while shooting.

X It may be difficult to hear recorded sound

during playback if you cover the
microphones when shooting.

z Do not operate the camera other than

touching while shooting. Operation
sounds will be recorded in the movie.

Stop shooting.

z Touch .

X The camera will beep twice and stop

shooting the movie.

X Shooting will automatically stop when the

memory card fills.

33

Shooting Movies

COPY

Zooming while shooting

Moving the zoom lever while shooting will zoom in on or out from the subject.
However, operation sounds will be recorded.

• When the mode switch is set to A, the icon for the determined scene

will appear (p. 184). “When Moving” icons will not appear, however.
Under certain conditions, the icon that appears may not match the actual
scene.

• If you change the composition while shooting and the white balance is not

optimal, touch to stop recording, then start recording again (only
when the image quality is set to (p. 108)).

• Movies can be shot by touching even if the mode switch is set to 4

(p. 103).

Shooting Time

Memory Card

Shooting Time

• Shooting times are based on default settings.

• Maximum clip length is approx. 10 minutes.

• Recording may stop even if the maximum clip length has not been reached on some

memory cards. SD Speed Class 6 or higher memory cards are recommended.

4GB 16GB

Approx. 14 min. 34 sec. Approx. 59 min. 40 sec.

34

Viewing Movies

COPY

You can view the movies you have shot on the screen.

Enter Playback mode.

z Press the 1 button.

X appears on movies.

Choose a movie.

z Drag across the screen to choose a movie

to play back.

Play the movie.

z Touch .

X The movie will play.

z Drag up or down the screen during

playback to adjust the volume.

z If you touch the screen during playback,

the movie will stop, and the movie control
panel will appear on the screen. Touch
to continue watching the movie.

X After the movie finishes, appears.

How can I play back movies on a computer?

Install the included software (p. 37).

• When watching a movie on a computer, frames may drop, it may not play

smoothly, and the audio may stop suddenly depending on the computer’s
capabilities. Use the supplied software to copy the movie back onto the memory
card, then play back the movie with the camera. If you connect the camera to a
TV, you can view images on the larger screen.

35

Transferring Images to a Computer for

COPY

Viewing

You can use the included software to transfer images you have shot with the
camera to a computer for viewing. If you are already using software included
with another Canon-brand compact digital camera, install the software from
the included CD-ROM, overwriting your current installation.

System Requirements

Windows

Windows 7 (Including SP1)

OS

Computer model

CPU

RAM

Interface
Free Hard Disk
Space
Display 1,024 x 768 pixels or higher

* For Windows XP, Microsoft .NET Framework 3.0 or later (max. 500 MB) must be installed.

Installation may take some time depending on your computer’s capabilities.

Macintosh

OS

Computer model

CPU

RAM

Interface
Free Hard Disk

Space
Display 1,024 x 768 pixels or higher

Windows Vista SP2
Windows XP SP3
The above OS should be pre-installed on computers with built-in
USB ports.
Pentium 1.3 GHz or higher (still images), Core 2 Duo 2.6 GHz or
higher (movies)
Windows 7 (64 bit): 2 GB or more
Windows 7 (32 bit), Windows Vista (64 bit, 32 bit): 1 GB or more (still
images), 2 GB or more (movies)
Windows XP: 512 MB or more (still images), 2 GB or more (movies)

USB

420 MB or more*

Mac OS X (v10.5 – v10.6)
The above OS should be pre-installed on computers with built-in

USB ports.
Intel Processor (still images), Core 2 Duo 2.6 GHz or higher (movies)
Mac OS X v10.6: 1 GB or more (still images), 2 GB or more (movies)
Mac OS X v10.5: 512 MB or more (still images), 2 GB or more

(movies)

USB

480 MB or more

36

Transferring Images to a Computer for Viewing

COPY

Installing the Software

Windows Vista and Mac OS X (v10.5) are used for these explanations.

Place the CD-ROM in the
computer’s CD-ROM drive.

z Place the supplied CD-ROM (DIGITAL

CAMERA Solution Disk) (p. 2) into the
computer’s CD-ROM drive.

z When the CD-ROM is placed in a

Macintosh, a CD-ROM icon will appear on
the desktop. Double-click the icon to open
the CD-ROM, then double click when
it appears.

Install the software.

z For Windows, click [Easy Installation], and

for Macintosh click [Install], then follow the
on-screen instructions to proceed with the
installation.

z If the [User Account Control] window

appears in Windows, follow the on-screen
instructions to proceed.

Complete the installation.

z For Windows, click [Restart] or [Finish],

then remove the CD-ROM when your
desktop screen appears.

z For Macintosh, click [Finish] in the screen

that appears when the installation is
complete, then remove the CD-ROM when
your desktop screen appears.

37

Transferring Images to a Computer for Viewing

COPY

Transferring and Viewing Images

Connect the camera to the
computer.

z Turn off the camera.
z Open the cover and insert the included

interface cable’s smaller plug (p. 2) firmly
into the camera terminal in the direction
shown.

z Insert the interface cable’s larger plug into

the computer’s USB port. For details on
the computer’s USB port, refer to the user
guide provided with the computer.

Turn on the camera to open
CameraWindow.

z Press the 1 button to turn on the camera.

z For Windows, click [Downloads Images

From Canon Camera using Canon
CameraWindow] when it appears on the
screen. CameraWindow will appear when
a connection is established between the
camera and computer.

z For Macintosh, CameraWindow will

appear when a connection is established
between the camera and computer.

CameraWindow

Transfer Images.

z Click [Import Images from Camera], and

then click [Import Untransferred Images].

X Images will transfer to the computer.

Images will be sorted by date and saved in
separate folders in the Pictures folder.

38

Transferring Images to a Computer for Viewing

COPY

z When image transfer is complete, close

CameraWindow and press the 1 button
to turn the camera off, then unplug the
cable.

z For details on how to view images using a

computer, refer to the Software Guide.

• If CameraWindow does not appear even after following Step 2 for

Windows, click the [Start] menu and choose [All Programs], followed by
[Canon Utilities], [CameraWindow] and [CameraWindow].

• If CameraWindow does not appear even after following Step 2 for

Macintosh, click the CameraWindow icon on the Dock (the bar which
appears at the bottom of the desktop).

• For Windows 7, use the following steps to display CameraWindow.

Click on the task bar.
In the screen that appears, click the link to modify the program.
Choose [Downloads Images From Canon Camera using Canon
CameraWindow] and click [OK].
Double click .

• You can transfer images even without using the image transfer function

in the included software by simply connecting your camera to a computer.
There are, however, the following limitations.

- It may take a few minutes from when you c onnect the camera to the computer

until you can transfer images.

- Images shot in the vertical orientation may be transferred in the horizontal

orientation.

- Protection settings for images may be lost when transferred to a computer.

- There may be problems transferring images or image information correctly

depending on the version of the operating system in use, the file size, or the
software in use.

- Some functions in the included software may not be available, such as editing

movies, and transferring images to the camera.

39

40

COPY

2

COPY

Learning More

This chapter explains the parts of the camera and what appears on the

screen, as well as the basic operating instructions.

41

Components Guide

COPY

Lamp (pp. 55, 74, 75, 76, 163)
Lens
Speaker
Zoom Lever
Shooting: i (Telephoto) / j (Wide
Angle) (pp. 26, 53)
Playback: k (Magnify) / g (Index)
(pp. 112, 119)
Shutter Button (p. 25)
Power Button (p. 21)
Mode Switch
Microphones (p. 33)

Flash (pp. 52, 83, 100)
Battery Cover (p. 18)
DC Coupler Terminal Cover (p. 174)
Tripod Socket
Screen (LCD Monitor) (pp. 43, 183,

186)
Memory Card Slot Cover (p. 19)
1 (Playback) Button (pp. 30, 111)
Indicator (p. 44)
Strap Mount (p. 13)
HDMI™ Terminal (p. 171)
A/V OUT (Audio/Video Output) /
DIGITAL Terminal (pp. 38, 140, 170)

Mode Switch

Use the mode switch to change the Shooting mode.

You can leave it to the camera to select settings for fully
automatic shooting (p. 26).

You can shoot with the best settings for the scene (p. 62) or
choose settings yourself to take various types of pictures
(p. 81).

42

Screen Display

COPY

Switching the Display

You can change the screen display by touching l. Refer to p. 183 for
details on information that appears on the screen.

Shooting

No Information DisplayInformation Display

Playback

Simple Information

Display

• Touching while in Playback mode will hide all image information and

icons, but you can still switch images (pp. 30, 31). Touch the screen to
restore the original display.

• You can also switch the display by touching l while the image

displays right after shooting. However, Simple Information Display is not
available, and image information will not display. You can change the first
screen that displays by choosing the 4 tab, then [Review Info] (p. 164).

Detailed Information

Display

Focus Check

Display (p. 118)

43

Indicator

COPY

Screen Display in Low Light Conditions

The display automatically brightens when shooting in dark conditions,
allowing you to check the composition (Night Display function). However, the
brightness of the image on the screen, and the brightness of the actual image
recorded may be different. Screen noise may appear and the movement of
the subject may appear somewhat rough on the screen. This has no effect on
the recorded image.

Overexposure Warning during Playback

In Detailed Information Display (p. 43), overexposed areas of the image flash
on the screen.

Histogram during Playback

z The graph that appears in Detailed

Information Display (p. 186) is called the
histogram. The histogram shows the
distribution of brightness in an image
horizontally, and the amount of brightness
vertically, and in this way you can judge
the exposure.

Dark

High

Low

Bright

Indicator

The indicator on the back of the camera (p. 42) will light or blink depending
on the camera’s status.

Color Status Operation Status

Green

Lights Connected to a computer (p. 38)/Display off (p. 159)

Blinks

When the indicator blinks green, do not turn off the power, open the
memory card slot cover or battery cover, or shake or jolt the camera. These
actions may corrupt the image data or cause the camera or memory card
to malfunction.

During camera start-up, Recording/Reading/Transmitting
image data, or when shooting long exposures (p. 78)

44

FUNC. Menu – Basic Operations

COPY

Commonly used functions can be set with the FUNC. menu.
The menu items and options differ depending on the Shooting mode (pp. 190
– 191) or Playback mode (p. 196).

Display the FUNC. menu.

z Touch H.

Choose a menu item.

z Drag the menu on the left up or down, or

touch a menu item to choose it.

z You can also choose menu items by

dragging on the screen outside of the
menu.

z Touch the menu item you chose again, or

touch the menu on the right.

Choose an option.

z Drag the menu on the right up or down, or

touch an item to choose it.

z You can also choose menu items by

dragging on the screen outside of the
menu.

z Touch the menu item you chose again, or

touch ^.

X The item will be set, and the original

screen will reappear.

z To choose a different item from the menu

on the left, touch the appropriate item.

z In the screen in Step 2, you can also touch

items to choose them in the menu to the
right.

The options on the right will not appear if you have selected any of the
following items from the FUNC. menu while in Playback mode: \ (p. 132),

c (p. 147), : (p. 125), (p. 129), a (p. 32), (p. 114), (p. 122),
; (p. 131).

45

MENU – Basic Operations

COPY

Various functions can be set from the menus. The menu items are organized
under tabs, such as for shooting (4) and playback (1). The options differ
depending on the Shooting mode and the Playback mode (pp. 192 – 195).

Display the menu.

z Touch H, then touch n.

Choose a tab.

z Touch a tab, or move the zoom lever

(p. 42) left or right to choose a tab.

Choose an item.

z Drag up or down the screen, or touch an

item to choose it.

z Some items require you to touch the item

to display a submenu in which you change
the setting.

46

Adjusting the Screen Brightness

COPY

Choose an option.

z For items that display qr to the left and

right, touch qr to change settings.

z For items that display a bar, touch the spot

on the bar where you want to make the
setting.

Complete the setting.

z Touch ^.

X The normal screen will reappear.

Adjusting the Screen Brightness

Display the menu.

z Touch H, then touch n.

Choose [LCD Brightness].

z Touch the 3 tab.
z Drag up or down the screen to choose

[LCD Brightness].

Adjust the brightness.

z Touch the point on the bar where you want

to change the brightness.

47

Changing the Sound Settings

COPY

You can silence or adjust the volume of camera sounds.

Muting Sounds

Display the menu.

z Touch H, then touch n.

Choose [Mute].

z Touch the 3 tab.
z Drag up or down the screen to choose

[Mute], then touch qr to choose [On].

If you mute camera sounds, the sound will also be muted when playing
back movies (p. 35). If you drag up the screen while viewing a movie, the
sound will turn on. You can then adjust the volume by dragging up or down
the screen.

Adjusting the Volume

Display the menu.

z Touch H, then touch n.

Choose [Volume].

z Touch the 3 tab.
z Drag up or down the screen to touch

[Volume].

Adjust the volume.

z Drag up or down the screen to choose an

item, then touch the point on the bar where
you want to change the volume.

48

Returning the Camera to Default Settings

COPY

When you have mistakenly changed a setting, you can reset the camera to
the default settings.

Display the menu.

z Touch H, then touch n.

Choose [Reset All].

z Touch the 3 tab.
z Drag up or down the screen to touch

[Reset All].

Reset the settings.

z Touch [OK].

X The camera will reset to the default

settings.

Are there functions that cannot be reset?

• The [Date/Time] (p. 22), [Language ] (p. 23), the image registered in [Start-

up Image] (p. 156), [Time Zone] (p. 159), [Calibration] (p. 161), and [Video
System] (p. 171), in the 3 tab.

• The recorded custom white balance data (p. 85).

• Colors that were chosen in Color Accent (p. 70) or Color Swap (p. 71).

• Shooting modes set when the mode switch was set to 4 (pp. 61, 103).

49

Power Saving Function (Auto Power

COPY

Down)

To save battery power, the screen turns off, and the camera turns off
automatically when it is not operated for a certain time.

Power Saving during Shooting

The screen will turn off approximately 1 minute after you stop operating the
camera. After about 2 more minutes, the lens will retract and the camera will
turn off. When the screen has turned off but the lens has not yet retracted,
pressing the shutter button halfway (p. 25) turns on the screen and shooting
can continue.

Power Saving during Playback

The camera will turn off approximately 5 minutes after you stop operating the
camera.

• You can turn off the power saving function (p. 158).

• You can adjust the time before the screen turns off (p. 159).

50

3

COPY

Shooting with Commonly

Used Functions

This chapter explains how to use common functions, such as the self-

timer, and how to turn off the flash.

• This chapter assumes that the camera is set to A mode. When shooting

in another mode, check which functions are available in that mode (pp. 188
– 193).

51

Turning the Flash Off

COPY

You can shoot with the flash turned off.

Touch .

Choose !.

z Touch !.
z Touch ! again to make the setting.

X Once set, ! will appear on the screen.

z To turn the flash back on, follow the steps

above to choose .

What if a flashing appears?

When you press the shutter button halfway in low light conditions where camera
shake is likely, a flashing will appear on the screen. Attach the camera to a
tripod to prevent it from moving.

You can also choose items by touching in Step 2.

52

Zooming In More Closely on Subjects

COPY

(Digital Zoom)

You can use the digital zoom to zoom up to approximately 48x maximum, and
capture subjects that are too far away for the optical zoom to enlarge.

Move the zoom lever toward i.

z Hold the lever until zooming stops.

X Zooming stops at the largest possible

zoom factor without image deterioration.
The zoom factor will appear on the screen
when you release the zoom lever.

Zoom Factor

Move the zoom lever toward i
again.

X The digital zoom will zoom in even further

on the subject.

Turning off the digital zoom

To turn off the digital zoom, touch H, then touch n to choose the 4 tab,
and choose [Digital Zoom] and the [Off] option.

• The focal lengths when using the optical zoom and digital zoom together

are as follows (all focal lengths are 35mm film equivalent):
28 – 1344 mm (28 – 336 mm when using the optical zoom alone)

• Depending on the recording pixel setting (p. 58) and zoom factor, the

images may appear coarse (the zoom factor will appear in blue).

53

Inserting the Date and Time

COPY

You can insert the shooting date and time in the lower right corner of an
image. Once inserted, however, they cannot be deleted. Be sure to check
beforehand that the date and time are correctly set (p. 21).

Display the menu.

z Touch H, then touch n.

Choose [Date Stamp].

z Touch the 4 tab.
z Drag up or down the screen to choose

[Date Stamp].

Choose the setting.

z Touch qr to choose [Date] or [Date &

Time].

z Touching ^ restores the settings screen.

X Once set, [DATE] will appear on the

screen.

Shoot.

X The shooting date or time will be recorded

in the image’s lower right corner.

z To restore to the original setting, choose

[Off] in Step 3.

You can insert and print the shooting date in images which do not have an
embedded date and time as follows. However, if you do this for images with
an embedded date and time, the date and time may be printed twice.

• Use the DPOF print settings (p. 147) to print.

• Use the included software to print.

Refer to the Software Guide for details.

• Print using printer functions (p. 140).

54

Using the Self-Timer

COPY

The self-timer can be used to shoot a group photo that includes the
photographer. The camera will shoot approximately 10 seconds after the
shutter button is pressed.

Choose .

z Touch H, then drag the menu on the

left up or down to choose .

Choose ].

z Touch ].
z Touch ] again to make the setting.

X Once set, ] will appear on the screen.

Shoot.

z Press the shutter button halfway to focus

on the subject, then press it fully.

X When the self-timer starts, the lamp blinks

and the self-timer sound plays.

X Two seconds before the shutter releases,

the lamp and sound speed up (the lamp
remains lit when the flash will fire).

z To cancel shooting with the timer after

countdown has started, touch the screen.

z To restore the original setting, choose

in Step 2.

55

Using the Self-Timer

COPY

Using the Self-Timer to Prevent Camera Shake

The camera will shoot approximately 2 seconds after the shutter button is
pressed, preventing any camera shake that occurs when pressing the shutter
button.

Choose [.

z Follow Steps 1 – 2 on p. 55 to choose [.

X Once set, [ will appear on the screen.

z Follow Step 3 on p. 55 to shoot.

Customizing the Self-Timer

You can set the delay (0 – 30 seconds) and the number of shots (1 – 10
shots).

Choose $.

z Follow Steps 1 – 2 on p. 55 to choose $.
z Touch on the right side of the screen.

Choose the settings.

z Touch qr to choose a value for the

desired option.

z Touch ^ twice to complete the setting.

X Once set, $ will appear on the screen.

z Follow Step 3 on p. 55 to shoot.

• When 2 or more shots are set, the exposure and white balance settings

are set with the first shot. If the flash fires or you set a high number of
shots, the shooting interval may take longer than usual. Shooting will stop
automatically if the memory card fills.

• When you set the delay for more than 2 seconds, the lamp and self-timer

sound speed up 2 seconds before the shutter releases (the lamp remains
lit when the flash will fire).

56

Changing the Aspect Ratio

COPY

You can change the width to height ratio of an image.

Choose .

z Touch H, then drag the menu on the

left up or down to choose .

Choose an option.

z Touch an item you want to set.
z If you drag the menu on the right up or

down, other items will appear.

z Touch the menu item again to complete

the setting.

X Once set, the aspect ratio of the screen will

change.

z To restore the original setting, choose

in Step 2.

The same aspect ratio as the screen of this camera, used for displaying on wide­screen HD TVs.

The same aspect ratio as 35mm film, used for printing out 5 x 7 in. or postcard
sized images.

The same aspect ratio as standard televisions, used for printing images on 3.5 x
5 in. to various A-sized papers.

A square-shaped aspect ratio.

How can I shoot with the display at full screen?

Set the aspect ratio to . However, shooting at a 16:9 aspect ratio will result in
images whose aspect ratio does not match 5 x 7 in., Postcard size, 3.5 x 5 in., or
various A sizes of paper when printing. White margins may be left in the print, and
some portions of the image may not print.

The digital zoom (p. 53) is only available in the aspect ratio since
[Digital Zoom] is fixed to [Off].

57

Changing the Recording Pixel Setting

COPY

(Image Size)

You can choose from 4 recording pixel settings.

Choose the recording pixel setting.

z Touch H, then drag the menu on the

left up or down to choose .

Choose an option.

z Touch an item you want to set.
z If you drag the menu on the right up or

down, other items will appear.

z Touch the menu item again to complete

the setting.

X The setting will appear on the screen.

z To restore to the original setting, choose

in Steps 1 – 2.

Changing the Compression Ratio
(Image Quality)

You can choose from the following 2 compression ratios (image quality):
(Fine), (Normal).

Choose the compression ratio
setting.

z Touch H, then drag the menu on the

left up or down to choose .

Choose an option.

z Touch an item you want to set.
z Touch the menu item again to complete

the setting.

X The setting will appear on the screen.

z To restore the original setting, choose

in Steps 1 – 2.

58

Changing the Compression Ratio (Image Quality)

COPY

Approximate Values for Recording Pixels and Compression
Ratio (for 4:3 Aspect Ratios)

Number of Shots per

Recording Pixels

(Large)

12M/4000x3000

(Medium 1)

6M/2816x2112

(Medium 2)

2M/1600x1200

(Small)

0.3M/640x480

• The values in the table are measured according to Canon standards and may change

depending on the subject, memory card and camera settings.

• The values in the table are based on 4:3 aspect ratio. If the aspect ratio is changed

(p. 57), more images can be shot because the data size per image will be smaller than
with 4:3 images. However, since 16:9 images have a setting of 1920 x 1080 pixels,
their data size will be larger than 4:3 images.

Compression

Ratio

Approximate Values for Paper Size (for 4:3 Aspect Ratios)

A2 (16.5 x 23.4 in.)

A3 – A5 (11.7 x

16.5 – 5.8 x 8.3 in.)

5 x 7 in.
Postcard size

3.5 x 5 in.

Single Image Data

Size (Approx. KB)

3084 1231 5042

1474 2514 10295

1620 2320 9503

780 4641 19007

558 6352 26010

278 12069 49420

150 20116 82367

84 30174 123550

z For sending images as e-mail

attachments.

Memory Card

(Approx. shots)

4GB 16 GB

59

60

COPY

4

COPY

Adding Effects and Shooting

in Various Conditions

This chapter explains how to add effects and how to shoot in various

conditions.

61

Shooting in Various Conditions

COPY

The camera will select the necessary settings for the conditions in which you
wish to shoot when you choose the matching mode.

Set the camera to 4 mode.

z Set the mode switch to 4.

Choose a Shooting mode.

z Touch G.

z If you touch qr or quickly drag left or right

across the screen, other Shooting modes
will appear.

z Choose the desired shooting mode.

X An explanation of the chosen Shooting

mode appears on the screen.

z Touch [OK] to complete the setting.
z Touch ^ to restore the Shooting mode

selection screen.

Shoot.

I Take portraits (Portrait)

z Produces a soft effect when

photographing people.

62

Shooting in Various Conditions

COPY

V Take shots of kids and pets

(Kids&Pets)

z Lets you capture subjects that move

around, such as children and pets, without
missing photo opportunities.

z At maximum wide angle, move

approximately 1 m (3.3 ft.) or more away
from your subject. At maximum telephoto,
move approximately 3 m (9.8 ft.) or more
away from your subject and shoot.

Take nightscapes without using a
tripod (Handheld NightScene)

z Lets you take beautiful snapshots of city

nightscenes by combining several
continuous shots to reduce camera shake
and noise.

z When using a tripod, you should shoot in

A mode (p. 26).

Take shots in low light conditions
(Low Light)

z Lets you take shots in dark places with

reduced camera shake and subject blur.

w At the beach (Beach)

z Lets you take shots of brightly lit people on

sandy beaches where the reflected
sunlight is strong.

63

Shooting in Various Conditions

COPY

OTake shots of foliage (Foliage)

z Lets you shoot trees and leaves, such as

new growth, autumn leaves or blossoms,
in vivid colors.

P Take shots of people in snow

(Snow)

z Lets you take bright, natural-colored shots

of people against snowy backgrounds.

t Take shots of fireworks

(Fireworks)

z Lets you take shots of fireworks in vivid

colors.

• In mode, hold the camera firmly while shooting as multiple images

are captured in succession.

• In t mode, attach the camera to a tripod to prevent the camera from

moving and blurring the image. Additionally, you should set [IS Mode] to
[Off] when shooting with a tripod (p. 165).

• In V or mode, images may appear coarse because the ISO speed

(p. 86) is increased to match the shooting conditions.

• If camera shake is too strong while shooting in mode, the camera

may not be able to combine images or you may not obtain the expected
result depending on shooting conditions.

• In mode, the recording pixel setting will be fixed at (1984 x 1488

pixels).

64

Adding Effects and Shooting

COPY

You can add various effects to images when shooting.

Choose a Shooting mode.

z Follow Steps 1 – 2 on p. 62 to choose a

Shooting mode.

Shoot.

Since you may not achieve the expected results with images shot in ,

, , and modes, try taking some test shots first.

Shoot images with vivid colors
(Super Vivid)

z Lets you take shots with vivid, intense

colors.

Take posterized shots
(Poster Effect)

z Lets you take shots that look like an old

poster or illustration.

65

Adding Effects and Shooting

COPY

Shooting with the Effects of a Fish-Eye Lens
(Fish-eye Effect)

Lets you shoot with the distorting effect of a fish-eye lens.

Choose .

z Follow Steps 1 – 2 on p. 62 to choose .

Choose an effect level.

z If you touch , [Effect Level] will appear

on the screen.

z Touch qr to choose an effect level, then

touch ^.

X You can check the effect on the screen.

Shoot.

66

Adding Effects and Shooting

COPY

Taking Shots That Look Like a Miniature Model
(Miniature Effect)

Blurs chosen portions in the top and bottom of an image to produce the effect
of a miniature model.

Choose .

z Follow Steps 1 – 2 on p. 62 to choose .

X A white frame (the area that will not be

blurred) appears on the screen.

Choose the area to keep in focus.

z Touch the screen or drag the white frame

up or down to change the area to keep in
focus.

z Touch , then touch , or to

change the size of the focused area and
touch ^.

Shoot.

• If you touch in Step 2, the frame will switch to vertical orientation. You

can change the area to keep in focus by touching the screen or dragging
the white frame left or right. Touch again to return the frame
orientation to horizontal.

• Holding the camera vertically will change the orientation of the frame.

• Be sure to set before shooting a Miniature Effect movie (p. 105).

67

Adding Effects and Shooting

COPY

Shooting with the Effects of a Toy Camera (Toy
Camera Effect)

This effect darkens and blurs the corners of the image, and changes the
overall color so that it looks like an image shot with a toy camera.

Choose .

z Follow Steps 1 – 2 on p. 62 to choose .

Choose a color tone.

z If you touch , [Color Tone] will appear

on the screen.

z Touch qr to choose an effect, then touch

^.

X You can check the color tone on the

screen.

Shoot.

Standard

Warm

Cool Gives images a cooler tone than [Standard].

Images will look like they were shot with a toy camera.

Gives images a warmer tone than [Standard].

68

Adding Effects and Shooting

COPY

Shooting in Monochrome

You can shoot images in black and white, sepia or blue and white.

Choose .

z Follow Steps 1 – 2 on p. 62 to choose .

Choose a color tone.

z If you touch , [Color Tone] will appear

on the screen.

z Touch qr to choose an effect, then touch

^.

X You can check the color tone on the

screen.

Shoot.

B/W

Shoots in black and white.

Sepia

Shoots with sepia tones.

Blue Shoots in blue and white.

69

Adding Effects and Shooting

COPY

Shooting with Color Accent

You can choose to retain a single color and change the rest to black and white
in a composition.

Choose T.

z Follow Steps 1 – 2 on p. 62 to choose T.

Touch .

X The unchanged image and the Color

Accent image will alternately display.

X The color for default settings is green.

Specify the color.

z Position the center frame so it is filled with

the color you want and touch the frame on
the lower part of the screen.

X The specified color will be recorded.

Recorded color

• Using the flash may cause unexpected results in this mode.

• Depending on shooting conditions, the image may become coarse, or the

colors may not come out as expected.

Specify the range of colors.

z Touch op to change the range of colors

to be retained.

z Choose a negative value to limit the range

of colors. Choose a positive value to
extend the range of colors to similar colors.

z Touching ^ restores the shooting screen.

70

Adding Effects and Shooting

COPY

Shooting with Color Swap

You can swap one color in an image for another when recording it. You can
only swap one color.

Choose Y.

z Follow Steps 1 – 2 on p. 62 to choose Y.

Touch .

X The unchanged image and the Color Swap

image will alternately display.

X The default setting is to change green to

gray.

Specify the color to be swapped.

z Position the center frame so it is filled with

the color you want and touch the left frame
that appears in the lower left of the screen.

X The specified color will be recorded.

Specify the target color.

z Position the center frame so it is filled with

the color you want and touch the right
frame that appears in the lower left of the
screen.

X The specified color will be recorded.

Specify the range of colors to be
swapped.

z Touch op to change the range of colors

to be retained.

z Choose a negative value to limit the range

of colors. Choose a positive value to
extend the range of colors to similar colors.

z Touching ^ restores the shooting screen.

71

Making Short Movies Automatically (Movie Digest)

COPY

• Using the flash may cause unexpected results in this mode.

• Depending on shooting conditions, the image may become coarse, or the

colors may not come out as expected.

Making Short Movies Automatically
(Movie Digest)

You can make a short movie of a day just by taking still images.
Each time you take a picture, the scene just before taking your shot will be
recorded as a movie. All the movies recorded that day will be saved as a
single file.

Choose .

z Follow Steps 1 – 2 on p. 62 to choose .

Shoot.

z Press the shutter button fully to shoot a still

image.

X A movie of approx. 2 – 4 sec. will be

recorded just before the image is taken.

What if a movie is not recorded?

If you take a picture just after turning on the camera, selecting mode or
otherwise operating the camera, a movie may not be recorded.

Viewing movies made with Movie Digest mode

You can select movies made in mode by date for viewing (p. 114).

72

Making Short Movies Automatically (Movie Digest)

COPY

• Since you are also shooting movies when you shoot still images, the

battery will be depleted more quickly than in A mode.

• The image quality will be fixed at for movies made in mode.

• In the following cases, movies will be saved as separate files even if they

were made on the same day with mode.

- If the clip file size reaches 4 GB or the recording time reaches approximately

1 hour

- If the movie is protected (p. 125)

- If the Time Zone setting is changed (p. 159)

- If a new folder is created (p. 158)

• If you operate the camera while shooting a movie, the sounds made will

be recorded in the movie.

• The camera will not play sounds, such as when pressing the shutter

button halfway, using the controls or the self-timer (p. 154).

73

Detecting a Face and Shooting

COPY

(Smart Shutter)

Detecting a Smile and Shooting

The camera will shoot, even without pressing the shutter button, when it
detects a smile.

Choose .

z Choose in Steps 1 – 2 on p. 62, then

touch .

z Touch , then touch ^.

Point the camera at a person.

z Each time the camera detects a smile it will

shoot after the lamp lights.

z Touching will pause smile detection.

Touch to resume smile detection.

Smile detection:
On/Off

Number of shots, switching
modes (pp. 75, 76)

What if a smile is not detected?

Smiles are easier to detect if the subject faces the camera, and opens their mouth
enough to show some teeth when smiling.

Changing the number of shots

Touch , then touch op to choose the number of shots. Touch ^ to change
the setting.

• You should switch to another mode when you finish shooting, or the

camera will continue taking shots each time the camera detects a smile.

• You can also shoot by pressing the shutter button.

74

Detecting a Face and Shooting (Smart Shutter)

COPY

Using the Wink Self-Timer

Point the camera at a person and press the shutter button fully. The camera
will shoot approximately 2 seconds after it detects a wink.

Choose .

z Choose in Steps 1 – 2 on p. 62, then

touch .

z Touch , then touch ^.

Compose the shot and press the
shutter button halfway.

z Touch a face displayed on the screen to

choose a person to wink (Touch AF).

z Confirm that a green frame appears

around the face of the person who will
wink.

Press the shutter button fully.

X The camera will enter shooting stand-by,

and [Wink to take picture] will appear on
the screen.

X The lamp will blink and the self-timer

sound will play.

Face the camera and wink.

X The shutter will release approximately 2

seconds after a wink is detected from the
person inside the frame.

z To cancel shooting with the timer after

countdown has started, touch the screen.

What if a wink is not detected?

• Wink a bit slowly.

• A wink may not be detected if eyes are covered by hair or a hat, or when wearing

glasses.

75

Detecting a Face and Shooting (Smart Shutter)

COPY

Changing the number of shots

After touching on the screen in Step 1, touch op to change the number of
shots. Touch ^ to complete the setting.

• Shutting both eyes will also be detected as a wink.

• If a wink is not detected, the shutter will release approximately 15

seconds later.

• If there are no people in the shot when the shutter button is pressed fully,

the camera will shoot after a person enters the shot and winks.

Using the Face Self-Timer

The shutter will release approximately 2 seconds after the camera detects a
new face (p. 93). You can use this when the photographer wants to be in the
image, such as a group photo.

Choose .

z Choose in Steps 1 – 2 on p. 62, then

touch .

z Touch , then touch ^.

Compose the shot and press the
shutter button halfway.

z Make sure a green frame appears on the

face focused on and white frames appear
on other faces.

Press the shutter button fully.

X The camera will enter shooting stand-by,

and [Look straight at camera to start count
down] will appear on the screen.

X The lamp will blink and the self-timer

sound will play.

76

Detecting a Face and Shooting (Smart Shutter)

COPY

Join the subjects and look at the
camera.

X When the camera detects a new face, the

lamp and self-timer sound will speed up
(the lamp remains lit when the flash will
fire), and approximately 2 seconds later
the shutter will release.

z To cancel shooting with the timer after

countdown has started, touch the screen.

Changing the number of shots

After touching in the screen in Step 1, touch op to change the number of
shots, then touch ^ to complete the setting.

Even if your face is not detected after joining the subjects, the shutter will
release approximately 15 seconds later.

77

Shooting Long Exposures

COPY

You can set the shutter speed to a range between 1 and 15 seconds to shoot
long exposures. However, you should attach the camera to a tripod to prevent
the camera from moving and blurring the image.

Choose N.

z Follow Steps 1 – 2 on p. 62 to choose N.

Choose the shutter speed.

z Touch ).
z Touch the bar, or drag it left or right, to

choose the shutter speed, then touch ^.

Confirm the exposure.

z When you press the shutter button

halfway, the exposure for the chosen
shutter speed will appear on the screen.

Shoot.

• The brightness of the recorded image may differ from the brightness of

the screen in Step 3 when the shutter button was pressed halfway.

• When shutter speeds of 1.3 seconds or slower are used, images are

processed to reduce noise after being taken. A certain amount of
processing time may be needed before you can take the next shot.

• You should set the [IS Mode] to [Off] when shooting with a tripod (p. 165).

• If the flash fires, the image may be overexposed. If this happens, set the

flash to ! and shoot.

• You can also make settings in the FUNC. menu that appears when you

touch H.

78

High-Speed Continuous Shooting

COPY

(High-speed Burst)

You can shoot continuously at a maximum speed of approximately

7.8 images/second while the shutter button is pressed fully and held.

Choose .

z Follow Steps 1 – 2 on p. 62 to choose .

Shoot.

X As long as you hold the shutter button

down, the camera will shoot successive
images.

• The recording pixel setting will be fixed at (1984 x 1488 pixels).

• The focus, brightness and white balance will be set with the first shot.

• Depending on the shooting conditions, camera settings and the zoom

position, the camera may stop shooting momentarily, or the shooting
speed may slow down.

• As the number of images increases, the shooting speed may slow down.

Images Displayed During Playback

Since each set of continuous images will become a single group, only the first
image captured in that group will be displayed. To indicate that the image is
part of a group, will appear on the screen.

If you erase a grouped image (p. 127), all the images in the group will also
be erased. Be sure to exercise adequate caution.

• You can play back images individually (p. 120), and cancel grouping

(p. 121).

• Protecting (p. 125) a grouped image will protect all of the images in the

group.

• If you play back grouped images using Filtered Playback (p. 115) or

Smart Shuffle (p. 122), grouping is temporarily canceled and images are
played back individually.

• Grouped images cannot use certain touch actions (p. 123), be tagged as

favorites (p. 129), edited (pp. 132 – 138), categorized (p. 131), printed
(p. 140), have print settings (p. 149) or photobook settings (p. 151)
applied. Play back grouped images individually (p. 120), or cancel
grouping (p. 121) before trying the above.

79

Capturing the Best Facial Expressions

COPY

(Best Image Selection)

The camera takes 5 continuous shots, then detects various aspects of the
shot such as facial expressions, and saves only one picture detected as the
best.

Choose .

z Follow Steps 1 – 2 on p. 62 to choose .

Shoot.

X When the shutter button is pressed fully,

the camera takes 5 continuous shots, and
saves one picture only.

• The recording pixel setting will be fixed at (1984 x 1488 pixels).

• The focus, brightness and white balance will be set with the first shot.

• Depending on the shooting conditions, you may not obtain the expected

results.

80

5

COPY

Choosing Settings Yourself

In this chapter you will learn how to use the various functions in G

mode to progressively advance your shooting skills.

• This chapter assumes that you have set the mode switch to 4 and the

camera is in G mode.

• G stands for Program AE.

• Before attempting to shoot using a function explained in this chapter in

modes other than G mode, check if the function is available in those modes
(pp. 188 – 193).

81

Shooting in Program AE

COPY

You can choose the settings for various functions to suit your preferences.
AE stands for Auto Exposure.
The focusing range is approximately 5 cm (2.0 in.) – infinity at maximum wide
angle (j), and approximately 1 m (3.3 ft.) – infinity at maximum telephoto
(i).

Enter G mode.

z Follow Steps 1 – 2 on p. 62 to choose G.

Adjust the settings according to
your purposes (pp. 83 – 102).

Shoot.

What if the shutter speed and aperture value appear in
orange?

If a correct exposure cannot be obtained when pressing the shutter button
halfway, the shutter speed and aperture value appear in orange. Try the following
settings to obtain the correct exposure.

• Turn on the flash (p. 83)

• Choose a higher ISO speed (p. 86)

82

Adjusting the Brightness

COPY

(Exposure Compensation)

You can adjust the standard exposure set by the camera in 1/3-stop
increments in the range of -2 to +2.

Enter Exposure Compensation
mode.

z Touch #.

Adjust the brightness.

z While looking at the screen, touch the bar,

or drag it left or right, to adjust the
brightness, then touch ^.

X The exposure compensation amount will

appear on the screen.

You can also make settings in the FUNC. menu that appears when you
touch H.

Turning the Flash On

You can make the flash fire every time you shoot.
The effective flash range is approximately 30 cm – 3.1 m (12 in. – 10.2 ft.) at
maximum wide angle (j), and approximately 1.0 – 1.7 m (3.3 – 5.6 ft.) at
maximum telephoto (i).

Choose h.

z Touch , then touch h.
z Touch h again to make the setting.

X Once set, h will appear on the screen.

You can also choose items by touching .

83

Adjusting the White Balance

COPY

The white balance (WB) function sets the optimal white balance for natural
looking colors to match the shooting conditions.

Choose the white balance
function.

z Touch H, then drag the menu on the

left up or down to choose .

Choose an option.

z Touch an item you want to set.
z If you drag the menu on the right up or

down, other items will appear.

z Touch the menu item again to complete

the setting.

X The setting will appear on the screen.

Auto

Day Light For shooting outdoors, in fine weather conditions.

Cloudy For shooting in cloudy, shady or twilight conditions.

Tungsten

Fluorescent

Fluorescent H

Custom For manually setting a custom white balance (p. 85).

Automatically sets the optimal white balance for the shooting
conditions.

For shooting under tungsten and bulb-type (3-wavelength)
fluorescent lighting.

For shooting under warm-white fluorescent, cool-white
fluorescent and warm-white-type (3-wavelength) fluorescent
lighting.

For shooting under daylight fluorescent and daylight-type (3­wavelength) fluorescent lighting.

84

Adjusting the White Balance

COPY

Custom White Balance

You can adjust the white balance to match the light source at the shooting
location. Make sure that you set the white balance under the light source of
the actual scene you will shoot.

z Follow Step 2 on p. 84 to choose .
z Make sure the entire screen is filled with a

plain, white colored subject, then touch
on the right.

X The tint on the screen will change when

white balance data is set.

If you change camera settings after recording white balance data, the tone
may not turn out properly.

85

Changing the ISO Speed

COPY

Choose the ISO speed.

z Touch H, then drag the menu on the

left up or down to choose .

Choose an option.

z Touch an item you want to set.
z If you drag the menu on the right up or

down, other items will appear.

z Touch the menu item again to complete

the setting.

X The setting will appear on the screen.

Automatically adjusts the ISO speed to the Shooting mode and shooting
conditions.

For shooting outdoors, in fine weather conditions.

Low

For shooting in cloudy or twilight conditions.

High

For shooting nightscapes or in dark interiors.

Changing the ISO speed

• Lowering the ISO speed results in sharper images, but there may be an

increased chance of image blurring in certain shooting conditions.

• Raising the ISO speed results in a faster shutter speed, reducing image blurring

and letting the flash reach greater distances to the subject. The images,
however, will appear coarse.

When the camera is set to , you can press the shutter button halfway to
display the automatically set ISO speed.

86

Correcting the Brightness and Shooting

COPY

(i-Contrast)

The camera can detect areas in the scene, such as faces or backgrounds,
that are too bright or dark and automatically adjust them to the optimum
brightness when shooting. Also, when the overall image is lacking in contrast,
the camera will automatically correct the image for a sharper impression
when shooting.

Choose [i-Contrast].

z Touch H, then n to choose the

4 tab. Touch [i-Contrast], then touch qr

to choose [Auto].

X Once set, @ will appear on the screen.

• Under some conditions, the image may appear coarse or may not be

corrected properly.

• You can correct recorded images (p. 137).

87

Continuous Shooting

COPY

As long as you hold the shutter button down, the camera will shoot
continuously.

Choose a Drive mode.

z Touch H, then drag the menu on the

left up or down to choose .

Choose an option.

z Touch W.
z Touch W again to make the setting.

X Once set, W will appear on the screen.

Shoot.

X As long as you hold the shutter button

down, the camera will shoot successive
images.

Maximum

Mode

Continuous 3.3

W

Continuous
Shooting AF

Continuous
Shooting LV*

* When in t mode (p. 64) or AF lock (p. 97), will change to .

• Cannot be used with the self-timer (pp. 55, 56).

• Continuous shooting speed increases in mode (p. 63).

• Depending on the shooting conditions, camera settings and the zoom

position, the camera may stop shooting momentarily, or the shooting
speed may slow down.

• As the number of images increases, the shooting speed may slow down.

• If the flash fires, the shooting speed may slow down.

Speed

(Approx.

images/sec.)

0.8

0.9

Description

The camera shoots continuously with the focus
and exposure set when the shutter button is
pressed halfway.

The camera shoots continuously and focuses.
The [AF Frame] is set to [Fixed frame].

The camera shoots continuously with the focus
fixed to the position set in manual focus. In t
mode, the focus is locked on the first shot.

88

Changing the Tone of an Image (My

COPY

Colors)

You can change the tone of an image, for example to sepia or black and
white, when shooting.

Choose My Colors.

z Touch H, then drag the menu on the

left up or down to choose .

Choose an option.

z Touch an item you want to set.
z If you drag the menu on the right up or

down, other items will appear.

z Touch the menu item again to complete

the setting.

X The setting will appear on the screen.

My Colors Off —

Vivid

Neutral

Sepia Changes the image to sepia tones.

B/W Changes the image to black and white.

Positive Film

Lighter Skin Tone Makes skin tones lighter.

Darker Skin Tone Makes skin tones darker.

Vivid Blue

Vivid Green

Vivid Red Emphasizes red tints. Makes red subjects more vivid.

Custom Color

Emphasizes the contrast and color saturation for a vivid
impression.

Tones down the contrast and color saturation for neutral
hues.

Combines the effects of Vivid Red, Vivid Green and Vivid
Blue to produce intense natural appearing colors like those
obtained with positive film.

Emphasizes blue tints. Makes the sky, ocean and other
blue subjects more vivid.

Emphasizes green tints. Makes mountains, foliage and
other green subjects more vivid.

You can adjust contrast, sharpness, and color saturation
etc. to your preference (p. 90).

89

Changing the Tone of an Image (My Colors)

COPY

• The white balance cannot be set in and (p. 84).

• In and , colors other than people’s skin color may change. You

may not obtain the expected results with some skin colors.

Custom Color

The contrast, sharpness, color saturation, red, green, blue, and skin tones in
an image can be chosen and set at 5 different levels.

z Follow Step 2 on p. 89 to choose .
z Touch on the right side of the screen.

z Touch qr to choose an item, then touch

the point on the bar where you want to
make a setting.

z The more to the right, the stronger/darker

(skin tone) the effect gets, the more to the
left, the weaker/lighter (skin tone) the
effect gets.

z Touch ^ to make the setting.

90

Shooting Close-ups (Macro)

COPY

If you set the camera to e, it focuses on close subjects only. The focusing
range is approximately 1 – 50 cm (0.4 in. – 1.6 ft.) from the end of the lens at
maximum wide angle (j).

Choose e.

z Touch H, then drag the menu on the

left up or down to choose .

z Touch e, then touch e again to complete

the setting.

X Once set, e will appear on the screen.

How can I take better close-ups?

Try attaching the camera to a tripod and shooting in [ to prevent the camera from
moving and blurring the image (p. 56).

e will turn gray in the area that displays in the yellow bar underneath the
zoom bar, and the camera will not focus.

Shooting Far Away Subjects (Infinity)

If you set the camera to u, it focuses on far-away subjects only. Set the
camera to u to focus more reliably on far away subjects (3 m (9.8 ft.) or more
away from the camera).

Choose u.

z Touch H, then drag the menu on the

left up or down to choose .

z Touch u, then touch u again to

complete the setting.

X Once set, u will appear on the screen.

91

Using the Digital Tele-Converter

COPY

The focal length of the lens can be increased by 1.5x or 2.0x. This enables a
faster shutter speed and less chance of camera shake than the zoom
(including digital zoom) used by itself at the same zoom factor.

Choose [Digital Zoom].

z Touch H, then n to choose the

4 tab. Touch [Digital Zoom], then touch
qr to choose an option.

X The view will be enlarged and the zoom

factor will appear on the screen.

• The respective focal lengths when using [1.5x] and [2.0x] are 42.0 –

504 mm and 56.0 – 672 mm (35mm film equivalent).

• A recording pixel setting (p. 58) of or will cause images to appear

coarse (the zoom factor will appear in blue).

• The digital tele-converter cannot be used together with the digital zoom

(p. 53).

• The digital-teleconverter can only be used with the aspect ratio.

• The shutter speeds may be the same when at maximum telephoto i,

and when zoomed in on the subject using Step 2 on p. 53.

92

Changing the AF Frame Mode

COPY

You can change the AF (Auto Focus) frame mode to match the scene you
want to shoot.

Choose [AF Frame].

z Touch H, then n to choose the

4 tab. Touch [AF Frame], then touch qr

to choose an option.

Face Detect

• Detects people’s faces and sets the focus, exposure (evaluative metering

only) and white balance ( only).

• When the camera is pointed at subjects, a white frame appears on the face

the camera judges to be the main subject, and gray frames (max. 2) will
appear on other faces.

• A frame will follow a moving subject within a certain range.

• When the shutter button is pressed halfway, up to 9 green frames will

appear on faces that the camera focuses on.

• If a face is not detected or only gray frames (no white frame) appear, an

AF frame will appear in the center of the screen when you press the
shutter button halfway.

• If a face is not detected when Servo AF (p. 97) is set to [On], the AF frame

will appear in the center of the screen when you press the shutter button
halfway.

• Examples of faces that cannot be detected:

- Subjects that are far away or extremely close

- Subjects that are dark or light

- Faces turned to the side or at an angle, or faces with a portion hidden

• The camera may mistakenly identify non-human subjects as a face.

• If the camera cannot focus when you press the shutter button halfway,

the AF frame will not appear.

93

Changing the AF Frame Mode

COPY

Fixed Frame

A single AF frame will be used. This is effective for focusing on a specific
point.

You can reduce the AF frame size

• Touch H, then n to choose the 4 tab, then touch [AF Frame Size]

and choose [Small].

• The AF frame is set to [Normal] when using the digital zoom (p. 53) or digital

tele-converter (p. 92).

If the camera cannot focus when you press the shutter button halfway, the
AF frame will turn yellow and will appear.

Changing the Composition with the Focus Lock

While you keep the shutter button pressed halfway, the focus and exposure
are locked. You can now recompose and shoot. This is called Focus Lock.

Focus.

z Center the subject you want in focus, and

press the shutter button halfway.

z Confirm that the AF frame on the subject is

green.

Recompose.

z Keep the shutter button pressed halfway

and move the camera to recompose the
scene.

Shoot.

z Press the shutter button fully.

94

Magnifying the Focal Point

COPY

If you press the shutter button halfway, the AF frame will magnify and you can
check the focus.

Choose [AF-Point Zoom].

z Touch H, then n to choose the

4 tab. Touch [AF-Point Zoom], then
touch qr to choose [On].

Check the focus.

z Press the shutter button halfway.

X In [Face Detect] (p. 93), the face detected

as the main subject will appear magnified.

X In [Fixed frame] (p. 94), the contents of the

AF frame will appear magnified.

What if the display does not magnify?

The display will not appear magnified in [Face Detect] if a face cannot be detected
or is too big in relation to the screen. In [Fixed frame], it will not appear magnified
if the camera cannot focus.

The magnified display will not appear when using the digital zoom (p. 53),
digital tele-converter (p. 92) or Servo AF (p. 97).

95

Choosing the Subject to Focus On

COPY

(Touch AF)

You can choose a specific subject or person's face, or a location on the
screen, to focus on and shoot.

Choose the subject, face or
location to focus on.

z Touch the subject or person shown on the

screen.

X When the AF frame mode is set to [Face

Detect], the camera will beep and display

when it detects the subject. The
camera will continue to focus even if the
subject moves.

X When the AF frame mode is set to [Fixed

frame], an AF frame will appear at the
location where you touch the screen.

z To cancel, touch ^.

Shoot.

z Press the shutter button halfway. The

frame where the camera focused will
change into a green .

z Press the shutter button fully to shoot.

What if Touch AF is not available?

You can activate Touch AF by touching on the screen to change it to
(p. 27). You can also touch H, then n to choose [Touch Shutter] in the
4 tab and choose [Off].

A border appeared around the screen when it was touched

Touch operations on faces or subjects appearing outside the border will not work.
They will work if the face or subject move inside the border.

96

Shooting with the AF Lock

COPY

• The camera may not be able to track the subject if the subject is too small,

moves too quickly or if the contrast between the subject and the
background is too low.

• When shooting in e or u (p. 91) with the AF frame mode set to [Face

Detect], choosing a location to focus on returns the camera to .

Shooting with the AF Lock

The focus can be locked. After locking the focus, the focal distance will not
change even when you release your finger from the shutter button.

Lock the focus.

z

Keep the shutter button pressed halfway

and touch inside the area shown on the left.

X The focus locks and % appears on the

screen.

z If you release your finger from the shutter

button and touch the screen again, AF lock

will cancel, and % will disappear.

Compose the scene and shoot.

Shooting with Servo AF

While the shutter button is pressed halfway, the focus and exposure will
continue to adjust, allowing you to take pictures of moving subjects without
missing a shot.

Choose [Servo AF].

z Touch H, then n and choose the

4 tab and touch [Servo AF], then touch

qr to choose [On].

Focus.

z The focus and exposure will be maintained

where the blue AF frame appears while

you press the shutter button halfway.

97

Changing the Metering Method

COPY

• The camera may not be able to focus in some conditions.

• In low light conditions, AF frames may not turn blue even after pressing

the shutter button halfway. In this case, you can set the focus and
exposure with the AF frame setting.

• If a correct exposure cannot be obtained, the shutter speed and aperture

value appear in orange. Release your finger from the shutter button, then
press it again halfway.

• You cannot shoot with the AF lock in this mode.

• The [AF-Point Zoom] option in the 4 tab is not available in Servo AF

mode.

• Not available when using the self-timer (p. 55).

Changing the Metering Method

You can change the metering method (brightness measuring function) to
match the shooting conditions.

Choose the metering method.

z Touch H, then drag the menu on the

left up or down to choose .

Choose an option.

z Touch an item you want to set.
z Touch the menu item again to complete

the setting.

X The setting will appear on the screen.

Evaluative

Center
Weighted Avg.

Spot

For standard shooting conditions, including back lit shots.
Automatically adjusts the exposure to match the shooting
conditions.

Averages the light metered from the entire frame, but gives greater
weight to the center.

Only meters within the (Spot AE Point frame) that appears at
the center of the screen. When the AF frame mode is set to [Fixed
frame], the Spot AE Point frame will be linked to the AF frame.

98

Shooting with the AE Lock

COPY

You can lock the exposure and shoot, or set the focus and exposure
separately to shoot. AE stands for “Auto Exposure”.

Lock the exposure.

z Point the camera toward the subject and

touch the lower part of the screen (inside

the frame shown on the left) while pressing

the shutter button halfway.

X When & appears, the exposure will be

locked.

z If you release your finger from the shutter

button and touch the screen again, AE lock

will cancel, and & will disappear.

Compose the scene and shoot.

Shooting with the FE Lock

Just as with the AE lock, you can lock the exposure for shooting with the flash.
FE stands for “Flash Exposure”.

Choose h (p. 83).

Lock the flash exposure.

z Point the camera toward the subject and

touch the lower part of the screen (inside

the frame shown on the left) while pressing

the shutter button halfway.

X The flash will fire and when ( appears,

the flash output will be retained.

z If you release your finger from the shutter

button and touch the screen again, FE lock

will cancel, and ( will disappear.

Compose the scene and shoot.

99

Shooting with Slow Synchro

COPY

You can make the main subject, such as people, appear bright by having the
camera provide the appropriate illumination with the flash. At the same time,
you can use a slow shutter speed to brighten the background that the light
from the flash cannot reach.

Choose Z.

z Touch , then touch Z.
z Touch Z again to make the setting.

X Once set, Z will appear on the screen.

Shoot.

z Even if the flash fires, ensure that the main

subject does not move until the shutter
sound ends.

Attach the camera to a tripod to prevent the camera from moving and
blurring the image. Additionally, you should set the [IS Mode] to [Off] when
shooting with a tripod (p. 165).

You can also choose items by touching .

100