Canon IMAGERUNNER ADVANCE 8105 User Manual
Environmental Profile Sheet
The imageRUNNER ADVANCE 8000 Series incorporates leading-edge Canon technologies,
each with a stronger environmental focus at every stage of the product life cycle–Produce, Use,
and Recycle. These technologies, which focus on Energy Conservation, Resource Conservation,
and Pollution Prevention, form the foundation of Canon’s Environmental Management System.
Canon’s Life Cycle Assessment System (LCA) seeks to control carbon emissions at each
life cycle stage. The result: An overall CO2 target reduction of up to 45% over previous
models. This equates to approximately 2.4 tons of carbon per year, per device.
In order to reduce dependence on petroleum-based materials, Canon uses 100% recycled
plastics and bio-based plastics on certain exterior parts.
Smaller and lighter design helps improve transportation efficiency. As a result, carbon
emissions per transporter vehicle can be reduced by up to 50%.
Power consumption in Sleep Mode has been reduced to 1W–or less!
Savings in power consumption during a one-week period have been reduced by up to 65%!
By utilizing White LED array technology in its Color Image Reader vs. a traditional Xenon tube,
power consumption is reduced by up to 75%!
By utilizing Canon Image Sensor technology over traditional CCD sensors, power consumption
is reduced by up to 50%!
Induction Heating (IH) technologies help reduce power consumption and limit the
warm-up period.
pO Toner with a lower melting point reduces fusing temperature requirements.
All suppliers are required to meet Canon’s stringent Green Procurement policy and
environmental terms. This helps Canon exceed the toughest global standards, such as
those set by the European Union’s RoHS Directive, which controls/restricts the use of
certain hazardous substances.
Each system is equipped with paper-, toner-, and energy-saving features that help to cut
costs and conserve resources.
Long-life parts and higher-yielding supplies help maximize uptime and reduce the amount
of materials consumed during the product life cycle.
Energy
Conservation
Resource
Conservation
Pollution
Prevention
Through our partnership with the Arbor
Day Foundation, Canon will plant a tree
for every imageRUNNER ADVANCE model
sold on our customer’s behalf. Together,
we can help leave a greener footprint
on the Earth for the benefit of future
generations. For more information,
please visit www.cusa.canon.com/green.
Environmentally Related Specifications
System Type
Digital Multifunction Imaging System
Functions
Standard: Copy, Print (UFR II), Scan,
Send, Store
Optional: Print (PCL, Adobe® PostScript®
3™)
Warm-up Time
From Power On: 1 Minute or Less
From Sleep Mode: 1 Minute or Less
From Energy Saver Mode: Approximately 20 Seconds
Power Requirements
120-127V AC, 60Hz, 16A
Power Consumption
Maximum: 1,920W or Less
Sleep Mode: 1W or Less
Copying/Printing: 1,826W or Less
Copy Ready (Standby): 324W or Less
Plug-in: 0.1W or Less
One Week TEC: 10.2kWh
One Year TEC: 530.4kWh
British Thermal Units (BTU)
Maximum (BTU/Hr.): 6,552
Copying/Printing (BTU/Hr.): 6,231
Copy Ready (Standby) (BTU/Hr.): 1,106
Plug: NEMA 5-20P
Dimensions (H x W x D)
49-1/4” x 53-3/8” x 30-3/8”*
(1252mm x 1481mm x 770mm)*
Installation Space (W x D)
93-3/4”* x 30-3/8” (2382mm* x 770mm)**
(When Booklet Finisher is attached, and Stack Bypass and
Auxiliary Tray are extended.)
Weight
Approx. 534 lb. (242kg)***
Noise Levels
Standby:
Copying/Printing: 75dB or Less
58dB or Less
Recycled Content
Recycled Primary Package%:nApprox. 19.9%
Post-consumer Waste:
✝
Secondary Waste Materials:
Recycled PETE Product:
✝ ✝ ✝
0.4%
✝ ✝
0.0%
0.0%
Recycled Paper Support
100% Post-consumer Content: Supported
Environmental Standards Compliance
ENERGY STAR® Qualified
EU RoHS Compliant
Ecomark
WEEE Directive
Environment-conscious Features
Two-sided, Sample Set, Confirmation/Cancel, Image Combination,
Job Build, Store In User Inbox, Secured Print, Job Forwarding,
Department ID Management, Access Management System
* Height: Up to top of Upright Control Panel in standard position.
Width: Up to edge of Upright Control Panel, in right side position.
** Installation dimensions include 100mm space between the wall and the back of device.
*** Includes ADF and consumables.
n Percentage based on weight of recycled content.
✝ The percentage of plastics that the device contains which is derived from
recycled plastic materials (by weight).
✝ ✝
The percentage of re-use waste material.
✝ ✝ ✝
The percentage of recycle PETE material.
This regulation is for JPN model product.
This regulation is for EU model product.
As an ENERGY STAR® Partner, Canon U.S.A., Inc. has determined that this product meets
the ENERGY STAR guidelines for energy efficiency. ENERGY STAR and the ENERGY STAR
mark are registered U.S. marks. CANON, IMAGERUNNER, and the GENUINE logo are registered trademarks of Canon Inc. in the United States and may also be registered trademarks
or trademarks in other countries. IMAGEWARE is a registered trademark of Canon U.S.A.,
Inc. in the United States and is a trademark of Canon Inc. in certain other countries.
IMAGEANYWARE is a trademark of Canon. All other referenced product names and marks
are trademarks of their respective owners and are hereby acknowledged. Some items may
not be available at this time; please check for availability. Specifications and availability
subject to change without notice.
©2011 Canon U.S.A., Inc. All rights reserved.
0911-8105-EF-PDF-TM
1-800-OK-CANON
www.usa.canon.com
Canon U.S.A., Inc.
One Canon Plaza
Lake Success, NY 11042
Loading...