Canon IMAGERUNNER ADVANCE 4025 User Manual

Environmental Profile Sheet

The imageRUNNER ADVANCE 4000 Series incorporates leading-edge Canon technologies,
each with a stronger environmental focus at every stage of the product life cycle–Produce, Use,
and Recycle. These technologies, which focus on Energy Conservation, Resource Conservation,
and Pollution Prevention, form the foundation of Canon’s Environmental Management System.

Canon’s Life Cycle Assessment System (LCA) seeks to control carbon emissions at
each life cycle stage. The result: An overall CO2 target reduction of up to 9% over
previous models.*

In order to reduce dependence on petroleum-based materials, Canon uses recycled
plastics and bio-based plastics on certain exterior parts.

Smaller and lighter design helps improve transportation efficiency. As a result, carbon

emissions per transporter vehicle can be reduced.

As well as predecessor models, power consumption in Sleep Mode is 1W–or less!

By utilizing White LED array technology in its Color Image Reader, power consumption

is reduced versus using a traditional Xenon tube.

By utilizing Canon Image Sensor technology, power consumption is reduced versus
using traditional CCD sensors.

Advanced Rapid Fusing technology helps reduce power consumption and limit the
warm-up period.

New QF Toner with a lower melting point reduces fusing temperature requirements.

All suppliers are required to meet Canon’s stringent Green Procurement policy and
environmental terms. This helps Canon exceed the toughest global standards, such as
those set by the European Union’s RoHS Directive, which controls/restricts the use
of certain hazardous substances.

Each system is equipped with paper-, toner-, and energy-saving features that help to
cut costs and conserve resources.

Long-life parts and higher-yielding supplies help maximize uptime and reduce the

amount of materials consumed during the product life cycle.

Energy

Conservation

Resource

Conservation

Pollution

Prevention

Through its partnership with the Arbor Day Foundation, Canon will plant a tree for
every imageRUNNER ADVANCE model sold on its customer’s behalf. Together, we
can help leave a greener footprint on the Earth for the benefit of future generations.
For more information, please visit www.cusa.canon.com/green.

* imageRUNNER ADVANCE 4025 model compared to imageRUNNER ADVANCE 3225 model.

Environmentally-Related Specifications

System Type

Digital Multifunction Imaging System

Functions

Standard: Copy, Print (UFR ll), Scan,

Send, Store

Optional: Print (PCL, Adobe® PostScript®

3™), Fax (Up to 4 lines)

Warm-up Time

From Power On: 38 Seconds or Less

From Sleep Mode: 10 Seconds or Less

From Energy Saver Mode: N/A

Power Requirements

120V AC, 60Hz, 7.0A

Power Consumption

Maximum: 1300W or Less

Sleep Mode: 1W or Less

Copying/Printing: 631W or Less

Copy-Ready (Standby): 63W or Less

Low Power Mode: N/A

Plug-in: 0.017W or Less

One Week TEC: 1.2 kWh

One Year TEC: 62.4 kWh

British Thermal Units (BTU)

Maximum (BTU/Hr.): 4,436

Copying/Printing (BTU/Hr.): 2,153

Copy-Ready (Standby) (BTU/Hr.): 216

Plug: NEMA 5-15P

Dimensions (H x W x D)

30-1/4" x 22-1/4" x 27-5/8" (769mm x 565mm x 700mm)

Installation Space (W x D)

34-1/2" x 27-5/8" (876mm x 700mm)
(When the Multi-Purpose Tray is extended)

Weight

Approximately 154 lb. (70kg)

Noise Levels

Standby: 43.0 dB

Copying/Printing: 66.1 dB or Less

Recycled Content

Recycled Primary Package (%):* 35%

Post-consumer Waste:

✝

Secondary Waste Materials:

Recycled PETE Product:

✝ ✝ ✝

0.2%

✝ ✝

0.0%

0.0%

Recycled Paper Support

100% Post-consumer
Content:

Yes

Environmental Standards Compliance

ENERGY STAR® Qualified

EU RoHS Compliant

Ecomark

Blue Angel

WEEE Directive

Environment-conscious Features

Two-sided, Sample Set, Confirmation/Cancel, Image Combination,
Job Build, Store in User Inbox, Secure Print, Job Forwarding,
Department ID Management, Access Management System

* Percentage based on weight of recycled content.
✝ The percentage of plastics the device contains that

is derived from recycled plastic materials (by weight).

✝ ✝

The percentage of reused waste material.

✝ ✝ ✝

The percentage of recycled PETE material.
This regulation is for JPN model product.
This regulation is for EU model product.

As an ENERGY STAR® Partner, Canon U.S.A., Inc. has determined that this product meets
the ENERGY STAR guidelines for energy efficiency. ENERGY STAR and the ENERGY STAR
mark are registered U.S. marks. CANON and IMAGERUNNER are registered trademarks of
Canon Inc. in the United States and may also be registered trademarks or trademarks in
other countries. IMAGEANYWARE is a trademark of Canon. All other referenced product
names and marks are trademarks of their respective owners and are hereby acknowl­edged. Some items may not be available at this time; please check for availability.
Specifications and availability subject to change without notice. Product is shown
with optional accessories.
©2012 Canon U.S.A., Inc. All rights reserved.

0612-4025-PDF-IH

1-800-OK-CANON
www.usa.canon.com

Canon U.S.A., Inc.
One Canon Plaza
Lake Success, NY 11042