Canon IMAGERUNNER 7095 User Manual

Production Solutions

MAIN UNIT

Challenge Your Document Production Standards

The Canon imageRUNNER 7095 Printer is excellent for print-only environments performing large volumes of trans-

action and host-based printing. You can configure the system with a choice of print controller options to execute

complex workflows and complete long runs with minimal operator involvement. Using a full range of document

handling and finishing accessories, professional publishing needs with available in-line perfect bookbinding,

saddle-stitched booklet finishing, hole-punching, tab-feeding, and high-capacity stacking can be accomplished.

You can also leverage your imageRUNNER device investment further by using part of the system’s vast memory as

an on-site document storage and print-on-demand solution. Moreover, you can do this while retaining complete

control over device access and data protection with the latest identity management and security measures.

Type: Digital Multifunctional

Imaging System
Imaging System: Laser Dry Electrostatic Transfer
Developing System: Dry Monocomponent Toner

Projection
Main Unit CPU: Dual Canon Custom Processors
Interface Connection: 10/100Base-TX (RJ-45), USB 2.0

High Speed
Image Server Memory: Standard 1GB RAM + 40GB HDD
Max. Mail Boxes Supported: 100 (Max. Page Capacity:

Approximately 20,000 pages)
Halftone: 256-Level Grayscale
Print Speed: 95 cpm (Letter)

49 cpm (11" x 17")
Warm-Up Time: 6 Minutes or Less
Standard Paper Supply: Dual Front-Loading Drawers

(1,500 Sheets each)

Dual Front-Loading Cassettes

(550 Sheets each)

50-Sheet Stack Bypass
Optional Paper Supply: 3,500-Sheet Paper

Deck-W1/X1
Paper Capacity: Standard: 4,150 Sheets

Maximum: 7,650 Sheets
Acceptable Paper Weight: 17 lb. Bond to 110 lb. Index

(All Sources)
Power Consumption: 2.15kW
Plug: NEMA 6-15R
Photoconductor Yield: 6 Million Impressions
Toner Yield: 47,000 Images @ 6% Coverage

OPTIONAL ACCESSORIES

Paper Deck-W1/Paper Deck-X1

Paper Capacity: 3,500 Sheets
Number of Drawers: 1
Acceptable Paper Weight: 17 lb. Bond to 110 lb. Index
Acceptable Paper Size

Paper Deck-W1: Letter
Paper Deck-X1: Letter-R, Letter, Legal, 11" x 17"

Perfect Binder-A1*

Bind Method: Perfect Binding
Cutting Method: Stack Rotation 3-Direction, or

1-Direction (for Open Edge) Cut

Finished Book Size:
(After 3-Direction Cutting)

Width: 7-1/8" to 11-1/4"
Length: 5-5/8" to 8-1/4"

Book Thickness: 10 to 200 Sheets Using 17 to

24 lb. Bond
10 to 150 Sheets Using 24 to
28 lb. Bond
10 Sheets Using 28 lb. Bond to
110 lb. Index

Cover Source Location: Stack Bypass, Paper Drawers,

Paper Deck (Imageable) Document
Insertion Unit(For Pre-PrintedCovers)

Stacker Tray Capacity: 3.94" (100mm) (Equivalent to 10

100-page Books with 17 lb. Bond)

Glue Supplies & Yield: Glue-A1 (33 lb./15kg):

Estimated Yield: 5,000 Sets of
100 Sheet Books (20 lb. Bond)
Glue-A2 (11 lb./5kg):
Estimated Yield: 1,650 Sets of
100 Sheet Books (20 lb. Bond)

Glue Warm-Up Time: 380 Seconds or Less

Glue Unit Capacity: Bind Approximately 180 100-page

Books Using 20 lb. Bond Paper

Trim Range

Width: 7mm – 27mm
Length: 7mm – 39mm

Adjustable in 1mm increments

Trimmer Waste Capacity: Space for 3-Sided Cuttings From

Approximately 15 100-page Books

Document Insertion Unit (Standard With Perfect Binder-A1)

Acceptable Media: Covers and Inserts

Number of Trays: 2

Tray Capacity

Upper Tray: 200 Sheets (20 lb. Bond)
Lower Tray: 200 Sheets (20 lb. Bond)

Acceptable Paper Weight: 17 lb. Bond to 158 lb. Index

Acceptable Paper Sizes

Upper Tray: Letter, Letter-R, Executive
Lower Tray: 11” x 17”, Legal, Letter, Letter-R,

Executive

Finisher-V1/Saddle Finisher-V2

Number of Trays: 2/3
Tray Capacity

Top Tray: 3,000 Sheets
Lower Tray: 2,000 Sheets
Saddle-Stitch Tray: 30 Booklets or Limitless

Acceptable Paper Weight

Finisher-V1: 17 lb. Bond to 110 lb. Index
Saddle Finisher-V2: 17 lb. Bond to 110 lb. Index

Acceptable Paper Size: 11" x 17", Legal, Letter, Letter-R,

Statement-R, Executive
Staple Positions: Corner Stapling, Double Stapling
Max. Stapling Capacity: 100 Sheets (Letter, Executive)

50Sheets(11"x 17",Legal,Letter-R)
Type of Staple: Staple-N1 (5,000 x 3)

Saddle-Stitching (Saddle Finisher-V2 Only)

Acceptable Paper Size: 11" x 17", Legal, Letter-R
Folding Mode: V-Folding Standard
Stapling Capacity: 20 Sheets (80 Pages)
Type of Staple: Staple-P1 (5,000 x 2)

Professional Puncher-A1* (For Finisher-V1/Saddle Finisher-V2)

Type: External In-Line Punch Unit
Hole-Punching Method: Press Punch Unit
Acceptable Punch

Paper Weight: 20 lb. Bond to 110 lb. Index
Acceptable Punch Paper Size: Letter
Punch Speed: Up to 105 ppm (Depending

on speed of main unit)

Punch Patterns (Optional): Plastic Comb (19-Hole)

Twin Loop (32-Hole)
Twin Loop (21-Hole)
Color Coil (44-Hole)
Velo Bind (11-Hole)
Loose-leaf Bind (3-Hole)
Proclick (32-Hole)

Document

Insertion

Unit-C1

Professional
Puncher-A1*

Booklet

Trimmer-C1

Saddle

Finisher-V2

Finisher-V1

Puncher Unit-V1 (For Finisher-V1/Saddle Finisher-V2)

Type: Internal Punch Unit
Hole-Punching Method: Press Punch System
Acceptable Punch

Paper Weight: 17 lb. Bond to 110 lb. Index

Acceptable Punch Paper Size

Two Holes: Legal, Letter-R
Three Holes: 11" x 17", Letter

Punch Speed: Up to 105 ppm (Depending

on speed of main unit)

Document Insertion Unit-C1 (For Finisher-V1/Saddle Finisher-V2)

Number of Trays: 2
Capacity

Upper Tray: 200 Sheets

Lower Tray: 200 Sheets
Acceptable Paper Weight: 17 lb. Bond to 158 lb. Index
Acceptable Paper Size

Upper Tray: Letter, Letter-R, Executive

Lower Tray: 11" x 17", Legal, Letter, Letter-R,

Executive

Paper Folding Unit-D1 (For Finisher-V1/Saddle Finisher-V2)

Folding Method: Roller Pressure Folding
Folding Type: Z-Fold
Acceptable Paper Weight: 17 lb. Bond to 20 lb. Bond
Acceptable Paper Size: 11" x 17"

Booklet Trimmer-C1 (For Saddle Finisher-V2)

Margin Trimming: Open-End Only
Trim Thickness: 40 Sheets
Waste Tray Capacity: 1,500 Sheets of Trimmed Strip
Acceptable Paper Weight: 17 lb. Bond to 110 lb. Index
Output Tray Capacity: 30 Booklets

CONNECTIVITY OPTIONS

Canon Multi-PDL Printer Kit-H2

Processor: Dual Canon Custom Processors
Memory: 1 GB – Shared

Perfect Binder-A1*

Paper
Folding
Unit-D1

Storage: 40 GB – Shared
PDL Support: PCL 5e, PCL 6, PostScript

High-Capacity

®

3

Emulation, UFR II

Resolution: 1200 x 1200 dpi: UFR II, PCL6

PostScript 3 Emulation
2400 x 600 dpi: PCL 5e

Interface Connections

Standard: 10/100Base-TX (RJ-45),

USB 2.0 High Speed

Network OS: Windows

®

98/Me/2000/XP
Windows Server 2003/
Windows Vista
Solaris 1.1x, 2.5x or Later
Macintosh
Novell

™

®

OS 8.0 or Later (PPD)

®

NetWare®v3.2, 4.1, 4.11,

4.2, 5, 5.1, 6, 6.5 (IPX/SPX)

imagePASS-S2

Type: External Print Controller
CPU: Intel®Celeron®D @ 2.8GHz
Operating System: System 8e
Memory: 256MB RAM (Standard)

512MB RAM (Maximun)

Hard Disk Drive: 80GB(Standard)
Interface Connections: 10/100/1000Base-TX(RJ-45)
Supported PDLs: Adobe PostScript

®3™

, PCL 5e/6

Resolution: PCL 5e: 2400 x 600 dpi

(Interpolated)
PCL 6/PS3:1200 x 1200 dpi**

Printer Drivers: Windows98/Me/2000/XP

Server 2003/WindowsVista
Citrix MetaFrame
Macintosh OS X (OS 10.2 or Later)

Internal Fonts: 136 AdobeType 1 Roman PS fonts
Network OperatingSystem: Apple Macintosh OS 9.1 (PPD),

OS X (10.2.8 or Later)
Solaris 8.0 or Later
Sun OS 4.1.3 or Later
Windows 2000/XP/Server 2003/
Windows Vista/NovellNetWare
v4.2, 5.1, 6.1

EFI Options: HotFoldersand VirtualPrinters,

Impose v2.6,256RAM

Stacker-A1

Main Unit Paper

Deck-W1

Paper

Deck-X1

OtherAccessories

• Cassette-AB1

• Tab Feeding Attachment-A1

• Document Tray-L1

• Braille Label Kit-A1

• Control Card Reader-D1

• Control Card Sets

• Universal Send Searchable PDF Kit-A1

• Universal Send PDF Security Feature Set-A1

• Digital User Signature Kit-A1

• Encrypted Secure Print Software-C1

• Web Access Software-F1

• Remote Operator’s Software Kit-A1

• Expansion Bus-D1

• Access Management System Kit-A1

• HDD Data Encryption Kit-B2

• HDD Data Erase Kit-A1

• Voice Guidance Kit-A2

• Secure Watermark Kit-A1

• Barcode Printing Kit-A1

• Finisher Option Power Supply Unit-R1

• High Capacity Stacker-A1

• Stacker Dolly-A1

• Punch Tools for Professional Puncher-A1

• ADF Access Handle-A1

*The Professional Puncher-A1 cannot be installed simul-

taneously with the Perfect Binder-A1. The Professional
Puncher-A1 and the Puncher Unit-V1 can be installed
simultaneously.

**1200 x 1200 dpi resolution for PCL printing is not supported

on Windows 9x/Me Clients.

NOTE: Some accessories require additional equipment or may
be prerequisites for other options. Check with your Canon
Authorized Dealer for details.

Device Dimensions and Power Requirements Chart

Product/Accessory Name Dimensions (H x W x D) Weight Power

Product/Accessory NameDimensions (H x W x D) Weight Power

Main Unit 58" x 47-7/8" x 30-7/8" 551 lb. 208V, 60Hz, 12A

PaperDeck-W1 22-1/2" x 12-3/4" x 23" 90.4 lb.

PaperDeck-X1 22-5/8" x 23-3/8" x 24-1/2" 101 lb.

High-Capacity Stacker-A1 48-9/10" x 33-9/10" x 30-1/5" 440 lb. 120V, 10A

Perfect Binder-A1 53-1/2" x 36-1/4" x 31-1/8" 696 lb. 208V,15A

Finisher-V1 46-1/2" x 31-1/2" x 31-1/4" 278 lb.

Saddle Finisher-V2 46-1/2" x 31-1/2" x 31-1/4" 392 lb.

Document Insertion 8-3/8"x 24-5/8" x 26-1/4" 37.5 lb.
Unit-C1 (213mm x 625mmx 667mm) (17kg)

PaperFolding Unit-D1 41" x 7-1/8" x 31" 97 lb.

Booklet Trimmer-C1 41" x 62-1/10" x 30-2/5" 335 lb.

Professional Puncher-A1 38-1/2" x 12"x 28-1/2" 170 lb.

* When Finisher is equipped with Paper Folding Unit-D1 and/or Document Insertion Unit-C1.

** When Finisher is equipped with Professional Puncher-A1, Booklet Trimmer-C1, High-Capacity Stacker-A1, and/or

Perfect Binder-A1.

(1474mm x 1216mmx 783mm) (250kg)

(570mmx 323mm x 583mm) (41kg)

(574.5mm x 593mmx 621mm) (46kg)

(1240mm x 860mmx 765mm) (200kg)

(1360mm x 920mmx 791mm) (316kg)

(1180mm x 800mmx 792mm) (126kg)

(1180mm x 800mmx 792mm) (178kg)

(1040mm x 179mmx 786mm) (44kg)

(1040mm x 1575mmx 770mm) (152kg)

(978mmx 305mm x 723mm) (77kg)

Directly From Main Unit

Directly From Main Unit*

or

208V, 60Hz, 12A**

FromFinisher-V1 or
Saddle Finisher-V2

Windows and Windows NT are registered trademarks and Windows Vista is a trademark of
Microsoft Corporation in the United States and/or other countries. Adobe and PostScript are
registered trademarks or trademarks of Adobe Systems Incorporated in the United States
and/or other countries. Macintosh is a registered trademark of Apple Computer, Inc. Intel and
Celeron are registered trademarks of Intel Corporation. Novell and NetWare are registered
trademarks of Novell, Inc. in the United States and other countries. Solaris and Sun are trade­marks or registered trademarks of Sun Microsystems, Inc. in the United States and other coun­tries. EFI and Command WorkStation are registered trademarks and FreeForm is a trademarkof
Electronics for Imaging, Inc. in the U.S. Patent and Trademark Office and certain other foreign
jurisdictions. eCopy ShareScan is a trademark of eCopy, Inc. CANON, IMAGERUNNER and MEAP
are registered trademarks of Canon Inc. in the United States and may also be registered trade­marks or trademarks in other countries. IMAGEWARE is a registered trademark of Canon
U.S.A., Inc. in the United States and is a trademark of Canon Inc. in certain countries.
IMAGEANYWARE is a trademarkof Canon. All referenced product names and other marks are
trademarks of their respective owners.
Specifications and availabilitysubject to change without notice.
©2010 Canon U.S.A., Inc. All rights reserved.

0410-7095PSS-PDF-IH

1-800-OK-CANON

www.usa.canon.com

Canon U.S.A., Inc.
One Canon Plaza
Lake Success, NY 11042