Canon imageFORMULA DR-5010C User Manual

Document Scanner
Startup Manual
Please read this manual before operating this unit. After you finish reading this manual, store it in a safe place for future reference.
International ENERGY STAR® Office Equipment Program
As an ENERGY STAR® Partner, Canon Electronics Inc., has determined that this machine meets the ENERGY STAR® Program guidelines for energy efficiency.
The International ENERGY STAR® Office Equipment Program is an international program that promotes energy saving through the use of computers and other office equipment. The program backs the development and dissemination of products with functions that effectively reduce energy consumption. It is an open system in which business proprietors can participate voluntarily. The targeted products are office equipment, such as computers, monitors, printers, fax, machine, copiers, and scanners. The standards and logos are uniform among participating nations.
Trademarks
•Canon and the Canon logo are trademark of Canon Inc.
•Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and other countries.
• ISIS is a trademark of Pixel Translations, a division of Captiva Software Corporation, in the United States.
Intel and Pentium are registered trademarks of Intel Corporation.
ENERGY STAR
•Adobe is the registered trademark of Adobe Systems Incorporated in the United States and/or other countries.
•Adaptec is registered trademark of Adaptec Inc.
•Other product and company names here in may be the trademarks of their respective owners.
is a U.S. registered mark.
Copyright
Copyright 2005 by CANON ELECTRONICS INC. All rights reserved. No part of this publication may be reproduced or transmitted, in any form or by any means, electronic or mechanical, including photocopying and recording, or by any information storage or retrieval system without the prior written permission of CANON ELECTRONICS INC.
Disclaimers
The information in this document is subject to change without notice. CANON ELECTRONICS INC. MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL, EITHER EXPRESS OR IMPLIED, EXPECT AS PROVIDED HERE IN, INCLUDING WITHOUT LIMITATION, THERE OF, WARRANTIES AS TO MARKETABILITY, MERCHANTABILITY, FITNESS FOR A PA RTICULAR PURPOSE OF USE OR AGAINST INFRINGEMENT OF ANY PATENT. CANON ELECTRONICS INC. SHALL NOT BE LIABLE FOR ANY DIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY NATURE, OR LOSSES OR EXPENSES RESULTING FROM THE USE OF THIS MATERIAL.
READ CAREFULLY BEFORE OPENING THE SEALED DISK PACKAGE
CANON SOFTWARE LICENSE AGREEMENT
IMPORTANT-READ THIS AGREEMENT BEFORE OPENING THE SEALED DISK PACKAGE! BY OPENING
THE SEALED DISK PACKAGE, YOU ARE DEEMED TO AGREE TO BE BOUND BY THIS AGREEMENT.
This legal document is a license agreement between you and Canon Electronics Inc. ("Canon"). BY OPENING THE SEALED DISK PACKAGE, YOU ARE DEEMED TO AGREE TO BE BOUND BY THE TERMS OF THIS AGREEMENT. TERMS OF THIS AGREEMENT, DO NOT OPEN THE SEALED DISK PACKAGE AND PROMPTLY RETURN THE CANON SCANNER, THE DISK PACKAGE CONTAINING SCANNER DRIVER SOFTWARE PROGRAMS AND/OR SCANNER UTILITY SOFTWARE PROGRAM PROPRIETARY TO CANON OR ITS LICENSOR (THE "SOFTWARE") AND THE ACCOMPANYING DOCUMENTATION AND OTHER ITEMS TO THE PLACE WHERE YOU OBTAINED THEM FOR A REFUND BEFORE THEY ARE USED OR OPENED OR UNPACKED.
In consideration of the right to use the SOFTWARE, you agree to abide by the terms and conditions of this Agreement.
1. GRANT OF LICENSE: Canon grants you the personal, non-exclusive right to use the SOFTWARE only on a single computer. You
may physically transfer the SOFTWARE from one computer to another provided that the SOFTWARE is used on only one computer at any time.
You shall not assign, sublicense, sell, rent, lease, loan, convey or transfer to any third party, or send or bring the SOFTWARE out of the country where you originally obtain it to other countries without required authorization of applicable governments, or copy, duplicate, translate or convert to another programming language the SOFTWARE or accompanying documentation, except as expressly provided herein.
Except as expressly permitted under the applicable law, you shall not alter, modify, disassemble, decompile or otherwise reverse engineer the SOFTWARE or accompanying documentation and you also shall not have any third party do so.
2. BACK-UP COPY: You may make one copy of the SOFTWARE solely for a back-up purpose or copy the SOFTWARE onto the permanent storage device (e.g. a hard disk) of your computer and retain the original for a back-up purpose. Except as expressly permitted under the applicable law, any other copying of the SOFTWARE is a violation of this Agreement. You must reproduce and include the copyright notice on the back-up copy.
3. SUPPORT AND UPDATE: Canon, Canon's affiliate, their distributor or dealer is not responsible for maintaining or helping you to use the SOFTWARE. No updates, fixes or support will be made available for the SOFTWARE.
4. LIMITED WARRANTY AND DISCLAIMER OF INDEMNITY: Canon, Canon's affiliate, their distributor or dealer will not guarantee uninterrupted service, or absence or correction of errors. Therefore, the SOFTWARE is licensed on an "AS IS" basis without warranty of any kind. The diskette on which the SOFTWARE is recorded is warranted against defective material or workmanship under normal use for a period of ninety (90) days from the date you purchased the same as evidenced by a receipt or otherwise. The limited warranty does not apply if the failure of the diskette resulted from accident, abuse or misapplication of the SOFTWARE and shall not extend to anyone other than the original user of the SOFTWARE.
CANON, CANON'S AFFILIATE, THEIR DISTRIBUTOR OR DEALER DISCLAIMS ALL IMPLIED WARRANTIES, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THE SOFTWARE OR ACCOMPANYING DOCUMENTATION.
NEITHER CANON, CANON'S AFFILIATE, THEIR DISTRIBUTOR NOR DEALER IS LIABLE FOR ANY LOSS OR DAMAGE INCLUDING CONSEQUENTIAL OR INCIDENTAL LOSS OR DAMAGE SUCH AS LOSS OF PROFITS, EXPENSE OR INCONVENIENCE, WHATSOEVER CAUSED BY OR ARISING OUT OF THE SOFTWARE, ACCOMPANYING DOCUMENTATION OR THE USE THEREOF.
CANON, CANON'S AFFILIATE, THEIR DISTRIBUTOR OR DEALER SHALL HAVE NO OBLIGATION TO INDEMNIFY YOU AGAINST ANY CLAIM OR SUIT BROUGHT BY A THIRD PARTY ALLEGING THAT THE SOFTWARE, ACCOMPANYING DOCUMENTATION OR THE USE THEREOF INFRINGES ANY INTELLECTUAL PROPERTY OF SUCH THIRD PARTY.
THE ABOVE IS CANON'S ENTIRE LIABILITY AND YOUR EXCLUSIVE REMEDY IN CONNECTION WITH THE SOFTWARE AND ACCOMPANYING DOCUMENTATION.
5. TERM: This Agreement is effective upon opening the sealed disk package and remains in effect until terminated. You may terminate this Agreement by destroying the SOFTWARE and any copy thereof. This Agreement will also terminate if you fail to comply with any of the terms of this Agreement. In addition to Canon enforcing its respective legal rights, you must then promptly destroy the SOFTWARE and any copy thereof.
6. U.S. GOVERNMENT RESTRICTED RIGHTS NOTICE: The SOFTWARE is provided with RESTRICTED RIGHTS. Use, duplication or disclosure is subject to restrictions as set forth in either subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARs 252.227-7013 or subparagraph (c) (1) and (2) of the Commercial Computer Software Restricted Rights Clause at FAR
52.227-19, as applicable.
7. SEVERABILITY: In the event that provision of this Agreement is declared or found to be illegal by any court or tribunal of competent jurisdiction, such provision shall be null and void with respect to the jurisdiction of that court or tribunal and all the remaining provisions of this Agreement shall remain in full force and effect.
8. ACKNOWLEDGEMENT: BY OPENING THE SEALED DISK PACKAGE, YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTOOD IT, AND AGREE TO BE BOUND BY ITS TERMS AND CONDITIONS. YOU ALSO AGREE THAT THIS AGREEMENT IS THE COMPLETE AND EXCLUSIVE STATEMENT OF AGREEMENT BETWEEN YOU AND CANON CONCERNING THE SUBJECT MATTER HEREOF AND SUPERSEDES ALL PROPOSALS OR PRIOR AGREEMENTS, VERBAL OR WRITTEN, AND ANY OTHER COMMUNICATIONS BETWEEN YOU AND CANON RELATING TO THE SUBJECT MATTER HEREOF. NO AMENDMENT TO THIS AGREEMENT SHALL BE EFFECTIVE UNLESS SIGNED BY A DULY AUTHORIZED REPRESENTATIVE OF CANON.
Should you have any questions concerning this Agreement, or if you desire to contact Canon for any reason, please write to Canon's local affiliate.
IF YOU DO NOT AGREE TO THE
INTRODUCTION
Thank you for purchasing the Canon DR-5010C scanner. Please read this manual thoroughly before using the machine to familiarize yourself with it's capabilities, and to make the most of its many functions. After reading this manual, store it in a safe place for future reference.
Manuals for the Scanner
The DR-5010C scanner has a Startup Manual (this manual) and online help. Please refer to the Startup Manual regarding the handling of the scanner, such as installation of software and setting up the scanner. The online help explains how to use the ISIS/TWAIN driver and the enclosed software, CapturePerfect.
Document Scanner
Startup Manual
Please read this manual before operating this unit. After you finish
Reading this manual, store it in a safe place for future reference.
Startup Manual
Explains how to set up the scanner, make connections, install software, and other procedures.
Be sure to read it before using the scanner.
ISIS/TWAIN Driver Help
Explains how to use the ISIS/TWAIN driver.
Document Scanner
Startup Manual
Installing the
Please read this manual before operating this unit. After you finish
Reading this manual, store it in a safe place for future reference.
Scanner (See p. 16.) Installation Procedure
(See p. 18.) Installing the
ISIS/TWAIN Driver (See p. 28.)
Installing CapturePerfect (See p. 31.)
CapturePerfect Help
Explains how to use CapturePerfect.
2 INTRODUCTION
Conventions
This manual uses the following symbols and indications. Before you start reading this manual, read the following and familiarize yourself with their meanings.
WARNING Indicates a warning concerning operations that may lead to death or injury to persons if not performed correctly. In order to use the machine safely, always pay attention to these warnings.
CAUTION Indicates a caution concerning operations that may lead to injury to persons, or damage to property if not performed correctly. In order to use the machine safely, always pay attention to these cautions.
IMPORTANT
Indicates operational requirements and restrictions. Be sure to read these items carefully in order to operate the machine correctly, and to avoid damage to the machine.
Note
Indicates a clarification of an operation, or contains additional explanations for a procedure. Reading these notes is highly recommended.
INTRODUCTION 3
Contents
INTRODUCTION....................................................................................................... 2
Manuals for the Scanner................................................................................................ 2
Conventions ................................................................................................................ 3
Before Using the Scanner ...................................................................................... 5
Safe Operation ............................................................................................................... 5
Installation Location ....................................................................................................... 5
Power .............................................................................................................................6
Moving the Scanner ....................................................................................................... 6
Normal Handling ............................................................................................................7
Disposal .........................................................................................................................8
Features of the DR-5010C .......................................................................................... 9
Checking the Packing List ......................................................................................... 11
Removing the Protective Packing Matarials ................................................................12
Names and Functions of Parts ..................................................................................... 14
Installing the Scanner ........................................................................................... 16
Installation Requirements .......................................................................................... 16
Installation Procedure ............................................................................................... 18
Interface Cards .......................................................................................................... 19
SCSI Cards .................................................................................................................. 19
USB 2.0 Interface Card................................................................................................ 19
Connecting the Scanner to Your PC .......................................................................... 21
Connecting via SCSI ...................................................................................................21
Connecting USB Interface ........................................................................................... 23
Connecting the Power Cord ...................................................................................... 24
Tu rning the Power ON/OFF ....................................................................................... 25
Tu r ning the Power ON .................................................................................................25
Recognizing the Scanner ............................................................................................25
Tu r ning the Power OFF ................................................................................................ 27
Installing the Software .......................................................................................... 28
Installing the ISIS/TWAIN Driver ............................................................................... 28
Installing CapturePerfect ........................................................................................... 31
Uninstalling Software ................................................................................................ 32
Using the Software................................................................................................ 35
Using the ISIS/TWAIN Driver .................................................................................... 35
Using CapturePerfect ................................................................................................ 36
Starting CapturePerfect ............................................................................................... 36
Starting CapturePerfect with the Event Function ...................................................... 39
Confirming Scanner Event ........................................................................................... 39
Using the Scanner................................................................................................. 42
Documents ................................................................................................................ 42
Setting Up the Document Feed Tray and the Document Eject Tray ........................... 44
Document Eject Tray ................................................................................................. 45
Installing the Document Eject Guide ......................................................................... 47
Placing a Document for Scanning ............................................................................. 49
How to Feed with the Page Separation Mode .............................................................49
How to Feed with the Bypass Mode ............................................................................ 52
Patch Code Sheets ................................................................................................... 54
About Patch Code Sheets ........................................................................................... 54
Functions of Patch Code Sheets ................................................................................. 55
Using Patch Code Sheets............................................................................................ 55
Effective Area for Detecting Patch Code Patterns ....................................................... 56
Clearing a Paper Jam................................................................................................ 57
Other Functions ......................................................................................................... 60
Regular Maintenance ............................................................................................ 61
Cleaning the Scanner .................................................................................................. 61
Cleaning inside the Scanner ........................................................................................ 61
Cleaning the Sensor Glass and the Rollers ................................................................. 62
Cleaning the Shading Boards ......................................................................................65
Removing and Attaching the Rollers ......................................................................... 67
Roller Replacement Message .....................................................................................67
Resetting the Counter .................................................................................................. 68
Removing and Attaching the Pickup Roller ................................................................. 70
Removing and Attaching the Feed Roller ....................................................................73
Removing and Attaching the Retard Roller ................................................................. 77
Troubleshooting .................................................................................................... 81
Specifications ........................................................................................................ 87
Index ....................................................................................................................... 90
4 Contents
Before Using the Scanner
Safe Operation
In order to ensure safe operation, be certain to read the cautions described below.
Installation Location
At least 3.9" (100 mm)
17.7" (450 mm) when the Document Feed Tray and Document Feed Tray Extension are closed
when Eject Tray is empty
29.5" (750 mm) when the Document Feed Tray and Document Feed Tray Extension are open
The performance of this scanner is affected by the environment in which it is installed. Make sure that the location where the scanner is installed meets the following environmental requirements:
• Provide adequate space around the scanner (as indicated in the above diagram) for operation, maintenance, and ventilation purposes.
• Provide adequate space behind the scanner in order to eject scanned documents to the back of the scanner. (See “Document Eject Tray,” on p. 45. )
• Avoid locations exposed to direct sunlight. If the scanner must be placed in such a spot, hang a heavy curtain or similar object to shade the scanner.
• Avoid dusty locations. Dust can get inside of the scanner and cause problems.
• Avoid warm or humid locations, such as in the vicinity of a water faucet, water heater, or humidifier, and avoid locations where the fumes from ammonia, paint thinner, or other volatile chemicals may be present.
• Avoid unstable surfaces and locations subject to vibration.
Before Using the Scanner 5
• Avoid locations that are subject to rapid temperature changes. Condensation inside of the scanner can result in inferior image quality. Use this scanner under the following environmental conditions:
Temperature: 10˚C to 32.5˚C (50˚F to 90.5˚F) Humidity: 20% to 80% RH
• Avoid locating the scanner near equipment that generates electromagnetic fields, including speakers, televisions, and radios.
Power
• Connect only to a power outlet of the rated voltage and power supply frequency. (Either 120 V, 60 Hz or 220-240 V, 50/60 Hz depending on your region.)
• Do not connect this scanner to a power outlet that is shared with other equipment. When using an extension cord, make sure that the extension cord is rated for the current requirements of the scanner.
• Do not place other objects on the power cord. Do not step on the power cord.
• Do not bundle the power cord or wrap the power cord around an object, such as a table leg.
• Do not pull on the power cord. Always grasp the plug when unplugging the power cord.
• Do not place other objects around the outlet.
• If you have any questions concerning your local power supply, contact your local authorized Canon dealer or your local power company.
Moving the Scanner
• To avoid dropping or damaging the scanner, always carry it with two hands. The scanner weighs approximately 23 lb (10.2 kg).
• Make sure to disconnect the interface cable and power cord. If the scanner is transported with these items plugged in, the plugs and connectors may be damaged due to physical shock or concussion.
6 Before Using the Scanner
Normal Handling
WARNING To avoid fire and electric shock, always observe the following warnings when using this scanner.
• Do not place flammable chemicals, such as alcohol or paint thinner, near the scanner.
• Do not cut, damage, or modify the power cord. Do not place heavy objects on the power cord, do not pull on the power cord, and do not bend the power cord sharply.
• Do not plug in or unplug the power cord with wet hands.
• Do not use multioutlet adapters to connect multiple devices to one outlet.
• Do not tie up or bundle the power cord. Push the plug in as far as it will go when plugging in the power cord.
• Only use the power cord that was provided with this scanner.
• Do not attempt to disassemble or modify this scanner.
• Do not use flammable sprays near this scanner.
• Always turn the scanner OFF and unplug the power cord before cleaning this scanner.
• To clean this scanner, dampen a cloth in a mild detergent solution and then wring the cloth out thoroughly. Do not use flammable liquids to clean the scanner, including alcohol, benzene, or paint thinner.
• If the scanner ever makes a strange noise, emits smoke or a strange odor, becomes hot, or if the scanner does not operate at all even though the power is ON, immediately turn the scanner OFF and unplug the power cord. Contact your local authorized Canon dealer or service representative to have the scanner serviced.
• Do not drop, kick, or otherwise strike the scanner. If the scanner does somehow become damaged, immediately turn the scanner OFF and unplug the power cord. Contact your local authorized Canon dealer or service representative to have the scanner serviced.
• Always turn the scanner OFF and unplug the power cord before moving the scanner.
Notice to Cardiac Pacemaker Users
This product generates a weak magnetic field. If you use a cardiac
pacemaker, move away from product in the event that you notice any unusual symptoms. Also, please consult a cardiologist.
Before Using the Scanner 7
CAUTION
• Do not set the scanner up on a wobbly platform, a sloped surface, or any other type of unstable location. Do not set up the scanner in a location that is subject to vibration. The scanner could injure someone if it falls or tips over.
• Do not block the Ventilation Openings. Doing so could cause the scanner to overheat, creating a risk of fire.
• Do not place paper clips, staples, necklaces, or any other metallic objects on top of the scanner. Liquids or small metallic objects that get inside of the scanner create a risk of fire or electrical shock. If such foreign matter does get inside of the scanner, unplug the power cord immediately, and then contact your local authorized Canon dealer or service representative for assistance.
• Do not set up the scanner in a dusty or humid location. Doing so creates a risk of fire or electrical shock.
• Do not place objects on top of the scanner. The object could injure someone if it falls or tips over.
• To prevent any risk of fire or electrical shock, be sure that the power source meets the power requirements of the scanner.
• When unplugging the power cord, always grasp the plug. Pulling on the cord itself could expose or break the wires in the power cord, damaging the cord and creating a risk of fire or electrical shock.
• In order to allow you to easily unplug the power cord at any time, do not place other objects around the power outlet. Such obstacles could prevent you from unplugging the power cord quickly in an emergency.
• Do not spill liquids or flammable chemicals (such as alcohol, paint thinner, or benzene) on the scanner. Doing so creates a risk of fire or electrical shock.
• If the scanner will not be used for an extended period of time, unplug the power cord for safety’s sake.
• When operating this scanner, avoid wearing loose fitting clothing, dangling jewelry, or other material that could get pulled into the scanner. Injury could result. Be especially careful if you are wearing a necktie or have long hair. In the event that some article or clothing does get caught in the scanner, turn the power OFF immediately.
• Be careful when placing paper in the scanner and when removing jammed paper. It is possible to cut your hand on the edge of a sheet of paper.
Disposal
• When disposing of this scanner, be sure to follow all local ordinances and laws or consult with the retailer who sold you the scanner.
8 Before Using the Scanner
Features of the DR-5010C
The main features of the DR-5010C scanner are listed below.
Fast Document Feeding
The scanner can scan a maximum of 50 documents per minute in a range of sizes from business cards to 11.6" x 17"/A3 size. (Scanning conditions: Black and white, LTR/A4 size portrait, two sided, 200 dpi)
Compact Size
The scanner is extremely compact, with measurements of 15.6" x 12.3" x
7.5" (398.4 mm x 312 mm x 191.4 mm) (W x D x H).
SCSI III/USB 2.0 Interface Supported
The scanner is equipped with both SCSI III and Hi-Speed USB 2.0 interfaces for connecting to a personal computer.
Color/Grayscale Support
Documents can be scanned in 24-bit color or 256-level grayscale.
Supports a Variety of Scanning Modes
The scanner supports the following scanning modes, depending on the document type:
• Single-sided/double-sided mode
• Single sheet/dual feeding path
U-Turn Path
Documents are fed and ejected, from the front of the scanner. (See “Document Eject Tray,” on p. 45.)
Straight Path
Documents are ejected to the back of the scanner. Note, the ejected documents are stacked in reverse order to how they were fed. (See “Document Eject Tray,” on p. 45.)
Paper Size Detection
The scanner automatically detects the size of a scanned document and eliminates any unnecessary space around the edges of the image when storing it, even when storing a document of irregular size.
Double Feed Detection
The scanner detects when more than one sheet is fed at a time. (See “Double Feed Detection Function,” on p. 60.)
Skew Detection
The scanner detects when a skewed sheet is fed. (See “Skew Detection Function,” on p. 60.)
Advanced Text Enhancement
The scanner is equipped with an Advanced Text Enhancement mode that allows you to clearly scan text printed on a dark background, and text that is written in faint pencil.
Before Using the Scanner 9
Dropout Color
The scanner is equipped with a Dropout Color function that allows you to specify a color for the scanner to omit from scanned images.
Skip Blank Page Function
The scanner is equipped with a Skip Blank Page function that allows it to scan a document regardless of whether every document is double-sided or single-sided.
Prescan Function
The scanner is equipped with a Prescan function that allows you to adjust the contrast and brightness of a prescanned image and then send the adjusted image to the application software, without needing to scan the document again.
Remove Binder Holes
Removes black spots left when scanning documents that have had holes punched in them and been stored in a binder.
Multistreaming Function
The scanner supports multistreaming, which, according to the application, can create two images with different scanning conditions from one image. However, this function can only be used when the software supports multistreaming.
Auto Start
The scanner is equipped with an Auto Start function that automatically initiates scanning when a document is placed in the document feed tray.
Compatible with Carbonless Duplicating Paper
The scanner is able to scan carbonless duplicating paper.
Power Saving Feature
The scanner has a power saving feature that puts the scanner in low power mode after it has been idle for a certain period of time.
Note
Some functions may not be available depending on the software you are using.
10 Before Using the Scanner
Checking the Packing List
The contents of the carton in which this scanner is shipped are described below. If anything is missing or damaged, contact your local authorized Canon dealer or service representative.
D
o
c
u
m
e
n
t
S
c
a
n
S
n
t a
e
r
r
t
u
p
M
a
n
u
a
l
R e
a
d K e
t h
e
i
p
s
m t h
a i
s
n
m
u
a
a
l
n
t
u
h
a
o
l
r o
i
n
u
g
a
h
s
l
y a f
b
e
e
p
f
o l a
r
e c e
u
f
s
o
i n
r
g
f
u
t
t
h
u
i
r
s
e
s
r
c
e
a f e
n
r
n
e
e
n
r
c
. e .
DR-5010C Scanner
Document Eject Guide
USB Interface Cable
Startup Manual (This Manual)
DR-5010C Setup Disc (CD-ROM)
Power Cord
Quick Reference Guide
Adobe Acrobat
Setup Disc
(CD-ROM)
Warranty Card and Registration Card (U.S.A. and Canada only)
Note
• The DR-5010C setup disc is in the startup manual.
• Items included in this package may change without notice.
• Keep the carton and the packing material for future use if it is ever necessary to store or transport the scanner.
• The power cord varies according to country of purchase.
Before Using the Scanner 11
Removing the Protective Packing Materials
Remove all of the protective packing materials (marked ▼ in the diagrams) before using the scanner.
1.
Remove the protective tape from the scanner.
2.
Slowly open the Document Feed Tray, then remove the protective tape.
Feed tray
3.
Hold the edge of the Upper unit as shown in the diagram, and slowly open it until it stops.
Upper unit
CAUTION The pickup roller is located in the middle of the Upper unit. Do not hold the protrusion on the Upper unit when you open it. Doing so may deform the pickup roller or cause a feeding error.
12 Before Using the Scanner
4.
Remove the protective sheet then the protective material securing the pickup roller.
Pickup Roller
5.
Remove the roller cover, then remove the protective material securing the retard roller. Replace the roller cover.
Roller Cover
Retard Roller
6.
Gently close the Upper unit. Be sure that the Upper unit is completely closed by pushing on both edges with both hands until you hear a click.
Before Using the Scanner 13
Names and Functions of Parts
This section explains the name and function of each part. Familiarize yourself with the parts before connecting the scanner.
Front (Feed Tray Open)
Document Eject Tray Extension
Document Feed Tray
Place the document to be scanned here. (See p. 44.)
Document Feed Tray Extension
Pull this tray out if the document hangs over the edge of the main tray. (See p. 44.)
Open if the document extends beyond the edge of the eject tray. (See p. 45.)
Document Eject Guide
Attach it to prevent thin or long documents from jamming when being scanned. (See p. 47.)
Document Eject Tray 1
Scanned documents are ejected here. (See p. 45.)
Document Guides
Adjust them to align with the width of the document.
Controls
Stop Button
Push it to stop scanning.
Start Button
Push it to start scanning.
Feed Selection Lever
Use it to change the way the documents are fed. Move it up ( (page separation mode). (See p. 49.) Move it down ( time or to feed documents that are fastened together, such as invoices, without separating them (Bypass Mode). (See p. 52.)
14 Before Using the Scanner
) to continuously feed documents
) to feed documents one at a
Document Stopper
Moves up and down according to the paper feed switch lever. (See p. 49.)
Power Indicator
This indicator lights when the scanner is turned ON.
Power Switch
This switch is used to turn the scanner on. (See p. 25 and p. 27.)
Rear
Power Connector
Connect to the power cord. (See p. 24.)
Document Eject Tray 2
Switch the direction documents are eject by opening or closing this tray. (See p. 46.)
Interface
Ventilation Openings
CAUTION Do not block the Ventilation Openings. Doing so could cause the scanner to overheat, creating a risk of fire.
Interface
Ventilation Openings
DIP Switches
Set the SCSI ID. (See p. 22.)
Not Used
USB Connector
Connect the USB cable provided or one that supports Hi-Speed USB 2.0. (See p. 23.)
SCSI Connector
Connect to a 50-pin half-pitch (pin type) SCSI cable. (See p. 21.)
CAUTION Do not connect anything to the connectors that are not used. If anything is plugged into those connectors it may result in a malfunction or a fire.
Before Using the Scanner 15
Installing the Scanner
Installation Requirements
In order to use the DR-5010C, your computer must satisfy the following system requirements:
• A computer that meets the following specifications:
- CPU: Pentium 4 (1.5 GHz or higher)
- Memory: 512 MB or more (1 GB or more recommended)
- Hard disk: 1 GB or more available space
- CD-ROM drive
- SCSI board or Hi-Speed USB 2.0 interface
- Monitor: Resolution of 1024 x 768 (XGA) or better recommended
• SCSI board or USB 2.0 interface board that supports the scanner (See “Interface Cards,” on p. 19.)
• Hi-Speed 2.0 interface equipped with your PC or Hi-Speed 2.0 interface board compatible with your scanner
• One of the following operating systems:
Connecting via SCSI
- Microsoft Windows 98 SE
- Microsoft Windows Me
- Microsoft Windows NT 4.0 Workstation SP6
- Microsoft Windows 2000 Professional SP3 or later
- Microsoft Windows XP Professional SP1 or later
- Microsoft Windows XP Home Edition SP1 or later
Connecting via USB 2.0
- Microsoft Windows 98 SE
- Microsoft Windows Me
- Microsoft Windows 2000 Professional SP3 or later
- Microsoft Windows XP Professional SP1 or later
- Microsoft Windows XP Home Edition SP1 or later
• ISIS compatible or TWAIN compatible application software that runs on your operating system
IMPORTANT
• USB connection is not supported on Windows NT. Connect the scanner via a SCSI cable to use it with a Windows NT system.
• If the Hi-Speed USB 2.0 interface is standard equipment on your computer, then all computer operations are not guaranteed. If the standard Hi-Speed USB 2.0 interface does not operate normally sometimes, then use the recommended Hi-Speed USB 2.0 interface card. Contact your local authorized Canon dealer or service representative for more detailed information.
16 Installing the Scanner
• Use the most recently available SCSI or USB 2.0 driver when using the DR­5010C. Contact your local authorized Canon dealer or service representative. for more detailed information.
• If the CPU, memory, interface card, and other specifications do not satisfy those recommended, the scanning speed may be greatly reduced and transmission may take a long time.
• Even if the computer satisfies the recommended specifications, the scanning speed may be slow depending on the scan settings.
Note
• Make sure that enough virtual memory is set on your Windows system. Virtual memory settings vary according to the Windows system. For more information, refer to the Windows manual or the online help.
• After checking the shape of the SCSI connectors on your computer and the scanner, purchase a SCSI cable with the right combination of connectors. (See “Connecting the Scanner to Your PC,” on p. 21.)
• The USB cable you are using should be the one originally bundled with the scanner or a Hi-Speed USB 2.0 compatible cable.
• Depending on the application software that you are using, the device driver provided may not operate, or you may not be able to use the functions described in this guide.
• Make sure that the device driver and application software that you will be using are compatible with your PC, the system configuration, and the type of interface card that you are using.
• The ISIS/TWAIN driver provided with the scanner is not necessarily compatible with all ISIS compatible or TWAIN compatible application software. For details, contact your local authorized Canon dealer or service representative.
Installing the Scanner 17
Installation Procedure
The procedure for installing the scanner is outlined below. (For a detailed outline of this procedure, see “Connecting the Scanner to Your PC,” on p. 21.)
1. Check the interface card in your computer.
(See “Interface Cards,” on p. 19.)
2. Connect the scanner to the PC.
(See “Connecting the Scanner to Your PC,” on p. 21.)
3. Connect the power cord to the scanner.
(See “Connecting the Power Cord,” on p. 24.)
4. Turn the scanner ON first, and then boot up the PC.
(See “Turning the Power ON,” on p. 25.)
5. Let the PC recognize the Scanner.
(See “Recognizing the Scanner,” on p. 25.)
6. Turn the scanner OFF.
(See “Turning the Power OFF,” on p. 27.)
18 Installing the Scanner
Interface Cards
To connect the scanner with a SCSI connection, make sure that the SCSI card is one of the recommended cards listed below that supports SCSI III.
SCSI Cards
When connecting the scanner via SCSI, verify that the SCSI card you are using is one recommended for use with the scanner. The recommended SCSI cards are as follows:
Recommended SCSI Cards
(for PCI Bus)
Manufacturer: Adaptec Models: AHA-2930U, AHA-2940AU, ASC-19160,
ASC-29160
(for Card Bus)
Manufacturer: Adaptec Models: APA-1480
IMPORTANT
• Follow the instructions in your computer's and the SCSI card's manuals to install the SCSI card into your computer.
• The maximum SCSI cable length that can be used is determined by the SCSI standard. For more information refer to the manual for the SCSI card you are using.
USB 2.0 Interface Card
When using the USB 2.0 interface card, verify that the USB 2.0 interface card you are using is one recommended for use with the scanner. The recommended USB 2.0 interface cards are as follows:
Recommended USB 2.0 Interface Cards
(for PCI Bus)
Manufacturer: Adaptec Models: USB 2 connect 2000LP (AUA-2000)
USB 2 connect 3100 (AUA-3100LP) USB 2 connect 5100 (AUA-5100)
(for Card Bus)
Manufacturer: Adaptec Models: USB 2 connect for Notebooks (AUA-1420)
Installing the Scanner 19
IMPORTANT
• Follow the instructions in your computer's and the USB 2.0 interface card's manuals to install the USB 2.0 interface card into your computer.
• Use the most recent version of the USB 2.0 driver provided by Microsoft.
Note
If the USB 2.0 interface is not compatible with Hi-Speed USB 2.0, scanning speed is reduced.
20 Installing the Scanner
Connecting the Scanner to Your PC
There are two ways of connecting the scanner to your computer, via SCSI or USB. Choose whichever format is suitable for the environment in which you are using your PC.
IMPORTANT
• When the application is running, do not turn the scanner OFF or unplug the interface cable.
• Do not connect both a SCSI cable and a USB cable concurrently.
• Do not connect multiple DR-5010C scanners to one (1) computer.
• After having changed the connection, be sure to turn the scanner and the PC ON once again.
Connecting via SCSI
Notes on the Shape of Connectors and the SCSI Cable
• The DR-5010C is equipped with a 50-pin half-pitch (pin type) SCSI Connector.
• The SCSI cable is not provided with the scanner. Check the shape of SCSI connectors on your computer and the scanner, and use a SCSI cable that has compatible connectors.
Computer
DR-5010C
SCSI Cable
50-Pin Half-Pitch (Pin Type)
Installing the Scanner 21
Note
• The SCSI ID is set to 2 at the factory.
• The SCSI ID is set with the Dip Switches on the back of the scanner. The Dip Switches are on when they are down, and off when they are up.
• To change the SCSI ID, be sure to turn OFF the scanner and the computer and refer to the following table to set the SCSI ID.
Default Settings
(SCSI ID = 2)
2
1
ON
SCSI ID
2
3
4
5
SW1
OFF
ON
OFF
ON
SW2
OFF
OFF
ON
ON
IMPORTANT
• Turn OFF the power to the computer and the scanner before connecting the computer and setting the SCSI ID.
• The scanner has a built-in terminator that is fixed in the “ON” position. To connect the scanner with other SCSI devices in a daisy chain configuration, be sure to position the scanner at the end of the daisy chain, and turn off the terminators in the other SCSI devices.
• Be careful that the IDs for other SCSI devices connected or built-in to the computer do not duplicate the SCSI ID for the scanner.
22 Installing the Scanner
Connecting USB Interface
USB Interface Connection
• Be sure to use the USB cable bundled with the scanner or a Hi-Speed USB 2.0compatible cable.
• When using a USB extension card that supports Hi-Speed USB 2.0, be sure to choose one verified for use with the scanner. (See “USB 2.0 Interface Card,” on p. 19.)
Computer
USB Cable
DR-5010C
IMPORTANT
• If the operating system you are using is Windows NT, the connection via USB is not supported. When using the DR-5010C with Windows NT, be sure to connect the scanner via SCSI.
• When using a USB hub, be sure to use one compatible with USB 2.0.
Note
• The DR-5010C passed the Hi-Speed USB 2.0 certification test. However, when you use the scanner with a personal computer equipped with USB 2.0 as standard, the scanner may not always operate normally.
• If the interface is not Hi-Speed USB 2.0 compatible, the scanning speed will slow down.
Installing the Scanner 23
Connecting the Power Cord
Connect the power cord that is provided with this scanner to the power cord connector located on the rear of the scanner, and then plug the cord into a power outlet.
WARNING
Be sure to use the power cord provided with the scanner.
Be sure the scanner is turned OFF before connecting the power
cord.
24 Installing the Scanner
Turning the Power ON/OFF
Follow the procedures described below when turning the power ON or OFF.
Turning the Power ON
1.
Turn ON the scanner.
The Power Switch is on the lower left of the front of the scanner. Push the Power Switch to turn ON the scanner. The power lamp lights green when the power is ON.
ON
2.
Turn ON the PC.
WARNING If the scanner ever makes a strange noise, emits smoke or a strange odor, becomes hot, or if the scanner does not operate at all even though the power is ON, immediately turn the scanner OFF and unplug the power cord. Contact your local authorized Canon dealer or service representative to have the scanner serviced.
3.
Log on to Windows.
IMPORTANT
If you are using Windows NT 4.0 Workstation, Windows 2000 Professional, or Windows XP, be sure to log on as a user with administrator privileges.
Recognizing the Scanner
If you are using Windows 98SE/Me/2000 or Windows XP, then the first time that you turn ON your PC after connecting this scanner to your PC, Windows Plug and Play automatically displays a screen prompting you to install the scanner driver. Follow the instructions on the screen to proceed with the installation.
Installing the Scanner 25
• If you are using Windows 98SE, the [Add New Hardware Wizard] dialog box appears.
1. Click the [Next] button.
2. Select [Search for the best driver for your device. (Recommended)], and
then click the [Next] button.
3. Insert the setup disc into the computer’s CD-ROM drive.
4. Select [Specify a location], enter “D:\INF” (assuming that “D” is the
letter assigned to your CD-ROM drive), and then click the [Next] button.
5. Click the [Next] button.
6. Click the [Finish] button.
• If you are using Windows Me, the [Add New Hardware Wizard] dialog box appears.
1. Select [Specify the location of the driver (Advanced)], and then click the
[Next] button.
2. Insert the setup disc into the computer’s CD-ROM drive.
3. Select [Search for the best driver for your device. (Recommended)], and
then select [Specify a location]. Enter “D:\INF” (assuming that “D” is the letter assigned to your CD-ROM drive), and then click the [Next] button.
4. Click the [Next] button.
5. Click the [Finish] button.
• If you are using Windows 2000 Professional, the [Found New Hardware Wizard] dialog box appears.
1. Click the [Next] button to proceed to the Install Hardware Device
Drivers screen.
2. Select [Search for a suitable driver for my device (recommended)], and
then click the [Next] button to proceed to the Locate Driver Files screen.
3. Select [Specify a location], and then click the [Next] button.
4. Insert the setup disc into the computer’s CD-ROM drive.
5. Enter “D:\INF” (assuming that “D” is the letter assigned to your CD-
ROM drive), and then click the [OK] button.
6. On the Driver Files Search Results screen, click the [Next] button.
7. If the message “Digital Signature Not Found” appears, click [Yes] to
continue installation.
8. On the Completing the Found New Hardware Wizard screen, click the
[Finish] button.
• If you are using Windows XP, the [Found New Hardware Wizard] dialog box appears.
1. Insert the setup disc into the computer’s CD-ROM drive.
2. On the Welcome to the Found New Hardware Wizard screen, select
[Install from a list or specific location (Advanced)], and then click the [Next] button.
26 Installing the Scanner
3. Select [Search for the best driver in these locations], and then clear the
[Search removable media (floppy, CD-ROM...)] check box. Select [Include this location in the search], enter “D:\INF” (assuming that “D” is the letter assigned to your CD-ROM drive), and then click the [Next] button.
4. Although a message appears indicating that the driver “has not passed
Windows logo testing”, click the [Continue Anyway] button in the [Hardware Installation] dialog box.
5. Click the [Finish] button on the Completing the Found New Hardware
Wizard screen.
IMPORTANT
• The DR-5010C is registered as “CANON DR-5010C SCSI” or “CANON DR-5010C USB” in the Imaging Device directory.
• The displayed device name of the DR-5010C differs depending on the connection, via SCSI or via USB. When having changed the connection, be sure to let the PC recognize the scanner once again.
Turning the Power OFF
CAUTION If the scanner will not be used for an extended period of time, unplug the power cord for safety’s sake.
1.
Turn OFF the PC.
2.
Turn OFF the scanner.
The Power Switch is located on the lower left front corner of the scanner. To turn the scanner OFF, press the Power Switch. When the Power Indicator turns OFF, the scanner is OFF.
OFF
Note
• When connecting the DR-5010C via SCSI, turn the scanner ON first, and then turn the PC ON.
• Wait at least 10 seconds before turning the scanner ON aftter it has been turned OFF.
Installing the Scanner 27
Loading...
+ 67 hidden pages