Canon imageFORMULA DR-4080U Instruction Manual

Instructions

Please read these instructions carefully before using this product, and save them for future reference.

FCC REGULATIONS (For 120V models)

This equipment has been tested and found to comply with the limits for a Class A digital device, pursu­ant to Part 15 of the FCC Rules. These limits are designed to provide reasonable pr otection against harm­ful interference when the equipment is operated in a commercial environment. This equipment gener­ates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equip­ment in a residential area is likely to cause harmful interference in which case the user will be r equir ed to
correct the interference at his own expense.

Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If
such changes or modifications should be made, you could be required to stop operation of the equip­ment.

RADIO INTERFERENCE REGULATIONS (For 120V models)

This digital apparatus does not exceed the Class A limits for radio noise emissions fr om digital apparatus
as set out in the Interference-causing equipment standard entitled "Digital Apparatus", ICES-003 of the
Industry Canada.

RÈGLEMENT SUR LE BROUILLAGE RADIOÉLECTRIQUE (For 120V models)

Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux appareils numériques
de Classe A prescrites dans la norme sur le matériel br ouilleur: "Appareils Numériques", NMB-003 édictée
par l'Industrie Canada.

Für EMVG

Dieses Produkt ist zum Gebrauch im W ohnbereich, Geschäfts-und Gewerbeber eich sowie in Kleinbetrieben
vorgesehen.

Trademarks

• IBM and PC/AT are registered trademarks of International Business Machines Corporation.

• Microsoft, Windows, and Windows NT are registered trademarks of Microsoft in the U.S. and in other countries.

®

• ISIS

• Product names mentioned herein are for identification purposes only and may be trademarks and/or registered

is a registered trademark of Pixel Translations, a division of Input Software Inc.

trademarks of their respective countries.

Other Notices

• The information given in these Operating Instructions is subject to change without notice.

English

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR ANY TYPE
OF MOISTURE.

THE SOCKET-OUTLET MUST BE NEAR THIS EQUIPMENT AND MUST BE EASILY ACCESSIBLE.
THE PRODUCT SHOULD BE USED ONL Y WITH A POWER CORD THAT IS SUPPLIED BY THE MANU-

FACTURER.

Français

Avertissement:

Pour éviter tout risque d'incendie ou de choc électrique, ne pas soumettre cet appareil à la pluie ou à
l'humidité.

"La prise secteur devra se trouver à proximité de l'appareil et être facilement accessible."
Le produit ne devra être utilisé qu'avec le cordon d'alimentation fourni par le fabricant.

Deutsch

Warnung:

Zur Verhütung von Feuer dem und elektrischem Schlag dieses Erzeugnis nicht Regen oder sonstiger
Feuchtigkeit aussetzen.

Die Steckdose muß nahe bei diesem Gerät angebracht und leicht zugänglich sein.
Dieses Gerät darf nur mit dem vom Hersteller gelieferten Netzkabel verwendet werden.

Für Benutzer in der BRD

Hinweis:

Der arbeitsplatzbezogene Geräuschemissionswert dieses Gerätes beträgt 70 dB(A) nach DIN 45635 Teil 19.

1

For your safety please read the following text carefully. (For United Kingdom only)

This appliance is supplied with a moulded three pin mains plug for your safety and convenience.
A 5 amp. fuse is fitted in this plug. Should the fuse need to be r eplaced please ensure that the replacement
fuse has a rating of 5 amps. and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark

or the BSI mark on the body of the fuse. If the plug contains a removable fuse cover you must
ensure that it is refitted when the fuse is replaced. If you lose the fuse cover the plug must not be used
until a replacement cover is obtained. A replacement fuse cover can be pur chased from your local Canon
Dealer .

If the fitted moulded plug is unsuitable for the socket outlet in your home then the fuse should be re­moved and the plug cut off and disposed of safely.
There is danger of severe electrical shock if the cut off plug is inserted into any 13 amp. socket.
If a new plug is to be fitted please observe the wiring code as shown below . If in any doubt please consult
a qualified electrician.

WARNING: This appliance must be earthed.
IMPORTANT: The wires in this mains lead are coloured in accordance with the following code.

Green-and-Yellow: Earth
Blue: Neutral

Brown: Live
As the colours of the wire in the mains lead of this appliance may not correspond with the coloured
markings identifying the terminals in your plug, proceed as follows.

The wire which is coloured Green-and-Yellow must be connected to the terminal in the plug which is
marked with the letter E or by the Earth symbol or coloured Green-and-Yellow.
The wire which is coloured Blue must be connected to the terminal in the plug which is marked with the
letter N or coloured Black.
The wire which is coloured Brown must be connected to the terminal in the plug which is marked with
the letter L or coloured Red.

How to replace the fuse:

Open the fuse compartment with a screwdriver and replace the fuse.

FUSE

2

General safety warnings

Always follow these general safety warnings to prevent personal injury.

Working around the scanner

Follow these warnings while working around the scanner.

• To avoid the hazards of fire and electrical shock, never expose this device to rain or any type of moisture.

• To avoid the hazard of fire, never block the fan exhaust vent.

• Never install and operate the scanner near flammable substances such as alcohol, thinner , acetone, or any other
type of volatile material.

• Never damage or modify the power cord and never place heavy objects on the power cord.

• To avoid severe electrical shock, make sure that your hands are dry before you handle the power cord.

• Never plug the scanner power cord plug into a multi-plug power strip.

• Never bundle, wrap, or tie the power cord around itself or another object.

• Connect the power plug securely to the power source and make sure no part of the metal plug is exposed.

• Use only the power cord and plug provided with the scanner.

• To avoid serious injury or damage to the scanner, never disassemble the scanner . Some parts inside the scanner
become extremely hot and carry high voltage.

• Never use flammable aerosol products near the scanner, such as adhesive sprays, air fresheners, insect repel­lent, etc.

• Before cleaning the scanner, always switch of f the power and disconnect the scanner power cord from the power
source.

• Use only a soft, damp cloth soaked in water and a small amount of mild detergent to clean the scanner. W ring the
cloth completely before you wipe the exterior of the scanner.

• If you hear strange sounds, sense vibration, or smell odd odors around the scanner, switch the scanner of f imme­diately and disconnect the power cord from the power source. Call for service immediately.

• T o avoid damage from shock and vibration, always have two people lift or carry the scanner . If you suspect that the
unit has been accidentally damaged, switch the scanner off and immediately disconnect the power cord from the
power source. Call for service.

• Before lifting or moving the scanner, always switch the scanner off and remove the power cord from the power
source.

• WARNING! TO AVOID DAMAGE TO YOUR EYES, NEVER LOOK DIRECTLY INTO THE SCAN­NING LIGHT.

3

General operating precautions

Never use this scanner for the following illegal purposes.

• Copying currency, coins, securities.

• Copying copyrighted material for any purpose other than personal reference.

• Copying any kind of public or private document issued and controlled by law birth certificates, operator licenses,
passports, etc.

Follow these simple precautions while working around the scanner.

• Never place the scanner on an unstable or vibrating surface.

• Keep all liquids, beverages, liquids away from the scanner . If you accidentally spill something into the scanner, switch
the power off immediately, disconnect the power cord from the power source, and call for service.

• Keep small objects like paper clips, pins, staples, etc. away from the scanner. Before you scan a document, make
sure all fasteners have been removed from the documents that you are going to scan.

• Place the unit in a clean room subject to comfortable ranges of heat and humidity. Avoid dust air and high humidity.

• To avoid breaking the document glass, never place anything on top of the scanner.

• Before connecting the power cord to the scanner, confirm that the power source meets the rated power specifications
printed on the name plate of the scanner.

• When you remove the power cord from the power source, grip it by the plug. Never pull on the cord to remove the plug
from the socket.

• Keep the area around the power source clear of all obstacles so you can disconnect the power cord easily in case of
an emergency.

• When the scanner is not in use, switch it off. If the scanner is not going to be used for a long period, switch it off and
disconnect the power cord from the power source.

• Avoid wearing loose fitting clothing, dangling jewelry, or long ties which could become entangled with moving parts
like the feed rollers.

• Some parts inside the scanner become extremely hot during operation because they are subjected to high voltage.
Avoid touching any part inside the scanner during cleaning or paper jam removal.

• To prevent electrical shock, avoid wearing metal jewelry when cleaning the scanner or removing a paper jam.

4

Table of contents

General safety warnings--------------------- 3

Working around the scanner -----------------------3

General operating precautions------------- 4
Before you begin------------------------------- 6

Welcome!------------------------------------------------6
Outstanding features ---------------------------------6
Conventions --------------------------------------------7
Important terms you should know-----------------7
Choosing a location for the scanner--------------7
Unpacking the scanner ------------------------------9
About the metal clamp ----------------------------- 10
Important parts of the scanner ------------------- 11
What is on the display panel?-------------------- 13

How to use the display panel ---------------- 13
What is on the LCD? --------------------------- 14

Setting up the scanner ----------------------15

Connecting the scanner --------------------------- 15
Switching the scanner on/off --------------------- 16
Selecting the display language ------------------ 16
Setting how the scanner operates -------------- 17

Setting the scan mode------------------------- 17
Setting the counter ----------------------------- 21
Setting the imprinter---------------------------- 23
Performing SCSI and other settings

with the Others menu -------------------------- 25

Cleaning the scanner------------------------38

Cleaning the scanner exterior-------------------- 38
Cleaning the scanner interior--------------------- 38

Cleaning the paper feed rollers-------------- 38
Cleaning the scanning path ------------------ 41
Cleaning the cover sheet and document

glass------------------------------------------------ 45
Re-attaching the white sensor roller ------- 46

Expanding memory --------------------------47
Troubleshooting-------------------------------48
Specifications----------------------------------50
Index ---------------------------------------------51

Operating the scanner-----------------------28

Using the ADF---------------------------------------- 28

ADF loading guidelines------------------------ 28
Documents you should never load

in the ADF----------------------------------------- 28
Loading documents in the ADF-------------- 29
Feeding a document manually

from the ADF------------------------------------- 32

Using the flatbed to scan documents ---------- 33

Loading the flatbed ----------------------------- 33
Loading the flatbed for repeated scanning 35

Clearing paper jams -------------------------------- 36

Removing a jammed paper from the feed
slot -------------------------------------------------- 36

Removing a paper jam from the paper
output slot----------------------------------------- 37

5

Before you begin

Welcome!

Thank you for purchasing a Canon Document Scanner DR-4080U.
These instructions show you how to operate and maintain the Canon Document Scanner DR-4080U. Before
you use the scanner, read these instructions. Keep these instructions and all the other documents you re­ceived with the scanner in a safe place where you can find them for future reference.

Outstanding features

Here is a brief summary of the outstanding features of your new scanner.

Enhanced Scan

Scanning quality is enhanced by providing an optical resolution of 400 dpi and gray scale scanning capa­bility .

High-speed document feeding

The Automatic Document Feeder (ADF) delivers high-speed scanning on standard paper sizes up to A3
(297 × 420 mm) up to 45 sheets per minute (scanning A4 size, single-sided documents). Scanning docu­ments place on the flatbed is also extremely fast.

Flatbed scanning

The flatbed allows you to scan originals which are too thin or too fragile to feed from the ADF.

Variety of scanning modes

The following modes can be selected for scanning jobs.

• Single-sided or double-sided documents

• Automatic feed of stacked documents or single manual feed

• Text (black and white) or photo (gray scale) mode scanning

Variety of image processing methods

The following processing methods can be applied to images as they are scanned:

• Dither

• Image Emphasis

• Reverse Image

• Mirror Image

• Noise Reduction

• Automatic Separation

• Remove Shadow

Double-feed detection

Immediate detection of double-feeds pauses the scanning job and allows you to correct the problem with
having to remove jammed sheets from the scanner.

Skewed feed detection

This function detects skewed document feed and stops feeding to allow the problem to be corrected.

6

Before you begin

Conventions

The following conventions are used in this manual.

(➞12) A number enclosed in parentheses refers to a page number that contains more infor-

mation about the previous sentence or paragraph.

Note: Notes provide tips about procedures and how to avoid minor difficulties.
Caution! Cautions alert you to procedures or circumstances that you should avoid in order to

prevent damage to the scanner.

WARNING! WARNINGS ALERT YOU TO DANGERS THAT COULD LEAD TO SERIOUS PER-

SONAL INJURY.

Important terms you should know

Here is a list of a few important terms you should know before you use this manual.

ADF

ADF denotes Automatic Document Feeder, the device on the scanner that allows you to load stacks of
documents for continuous scanning.

CIS

Contact Image Sensor, used to scan the back sides of originals.

document

The documents that you scan from the ADF or the flatbed of the scanner.

parent software application

The software application that you use to operate the scanner. The scanner operates when any ISIS or
TWAIN compliant software application.

Choosing a location for the scanner

Follow these recommendations on these checklists when you select a location for the scanner.

Carrying the scanner

• At least two people should lift and position the scanner for setup.

• If you have just transported the scanner from a cold location into a warm room, wait at least 1~2 hours before you
set up and switch on the scanner. Exposing the scanner to a sudden change in temperature could cause conden­sation to build up inside the scanner and adversely affect its performance. Allow time for the internal parts to
become perfectly dry.

7

Before you begin

General Location

• Make sure there is enough space around the scanner as shown in the illustration.

250 mm (9.8")

200 mm (7.9")

• The scanner should not be exposed to direct sunlight. If this is unavoidable, install heavy curtains on the windows.

• The area around the scanner should be free of dust, fumes, and water vapor.

• The area around the scanner must be well ventilated to allow using the volatile roller cleaning paper and paper
roller cleaning fluid.

• Never place the scanner near running water, a heat source, or in an area like a laboratory exposed to volatile,
corrosive, flammable chemicals like ammonia, acetone, benzene, etc.

• Set up the scanner in a room that is well within a comfortable range of temperature and humidity , and not subject
to rapid changes in temperature or humidity.

300 mm (11.8")

Room temperature
15°C to 30°C (59°F to 86°F)
Relative humidity
20% to 80% RH

• Place the scanner on a clean, flat, stable surface free of vibration and shocks.

• Never place the scanner near office equipment or an appliance that generates a strong magnetic field. The elec­trical “noise” from such a device could interfere with operation of the scanner.

• Never attempt to place or operate the scanner in a vertical position.

• To avoid poor performance caused by static electricity, never operate the scanner on top of a carpet.

Power source

• Use a power source with a voltage level that does not vary more than 10% from the voltage level marked on the
name plate (located on the back side of the scanner).

• Set up the scanner close to an independent power source. Do not plug the scanner power cord into a power outlet
that is shared by other devices or equipment.

• Keep the area around the power outlet free of obstructions in case you need to unplug the power cord quickly in an
emergency .

Power cord

• Use only the power cord supplied with the scanner and do not use an extension cord.

• Do not use a line conditioner, transient suppressor or surge protector.

• Never bundle the power cord or wrap the power cord around an object like a table leg.

• Keep the power cord free. Never place heavy objects on top of the power cord.

8

Before you begin

Unpacking the scanner

Check each item against the list below as you remove it from the box. If any item is missing, contact the
supplier.

Document Scanner DR-4080U

License Agreement

ISIS driver installer disk
(3.5 in. x 1)

WarrantyRegistration card ISIS/TWAIN Driver

TWAIN driver installer disk
(3.5 in. x 1)

ManualsBlowerPower cord

Operating Instructions

PixView Software Application
(3.5 in. x 4)

Note: Save the original box and packing material for re-packing the scanner if you need to transport it.

9

Before you begin

About the metal clamp

To avoid damage during shipping, the optical unit of the scanner is secured with a metal clamp. Before
moving or installing the scanner, you must install the metal clamp in the specified position.
If you fail to install the metal clamp in the specified position when setting up the scanner, a warning
message will be displayed on the LCD and you will not be able to use the scanner.

1

Pull the scanner out 15 cm (6 in.) over
the edge of a desk or worktable as
shown in the illustration.

15 cm
(6 in.)

No more than 15 cm!

Caution!

• To prevent the scanner from falling, do not allow the scanner to overhang the edge of the
table by more than 15 cm (6 in.)

• To avoid damaging the scanner, never turn it upside down or lay it on its side.

10

2

When moving the scanner, install the
metal clamp on the bottom of the
scanner at position
ting up and using the scanner, install
the clamp at position

, and when set-

➀

.

➁

➀

➁

Metal clamp

Screw

Important parts of the scanner

ADF door release

(Inside ADF door)

ADF door
Front door

Manual feed selector

Before you begin

Hopper
Document guide

Document cover

Display panel

Displays short messages
when performing settings.

Exit substopper
Front door release

(Inside the front door)

Exit document stopper

Hopper extension tray

Power switch

|On

OOff

AC inlet

Fan exhaust vent

Power indicator

Lights green when power is
on. Lights steadily red or
flashes red when an error
occurs.

Imprinter door
(top door)

Attaches the Imprinter for
DR-4080U and ink
cartridge.

Connectors

Connect the scanner and
host computer.

Power cord

11

Before you begin

Standard mark

Cover sheet

(white sheet)

Document glass (Flatbed)

CIS glass

Scanning section glass

12

What is on the display panel?

You can use keys and display panel message to set up scanning jobs.

Before you begin

Scan Counter

Others

Ready/Error

ImprintHome

How to use the display panel

Press the keys to use the display panel.

Scan

Counter

Imprint

Others

Home

Start / Stop

Scan

Opens the Scan setting menu on the
LCD.

Counter

Opens the Counter setting menu to
you can set the number of documents
to scan.

Imprint

Opens the imprint menu so you can
stamp scanned documents.

Others

Opens the Others menu so you can set
the SCSI device numbers and perform
other important settings.

Home

Saves the settings you have per­formed in the menu, closes the menu,
and returns the scanner to the stand­by mode. You can also use this key to
change the display language.

Start/Stop

Starts or stops a scanning job.

DR - 4080U

Mode

Select

Select keys Mode keys

Liquid Crystal Display (LCD)

Mode keys

▲ ▲

▼ ▼

Select keys

Start / Stop

Start/Stop keyMenu keys

LCD

The LCD displays menu settings and
messages (up to 32 characters wide).

Displays the next mode in the selected
menu.

Displays the previous mode in the
selected menu.

Displays the next value in the selected
mode.

Displays the previous value in the
selected mode.

13

Before you begin

What is on the LCD?

The LCD displays the messages about the scanner status during scanning jobs and displays the menus
and settings for the menu setup mode.

The Ready message (stand-by mode)

The Ready message tells you that the scanner is standing by and ready for operation. After changing
menu settings, or before starting a scanning job, make sure “Ready” is displayed in the LCD.

Ready

Error messages

When a problem occurs with the scanner , a message is displayed in the LCD. For details, r efer to the error
message table. (➞ 49)

Error message display

U11 JAM

✕✕✕✕✕✕✕✕

Other messages

Message What it means

Scanning...

Stopping...Wait!

123456

Scanner Stopped

123456

Press START Key

Displayed from the beginning to the end of a scanning
job.

1

When the job is finished, “Ready” is displayed.
Displayed immediately after pressing Start/Stop during

a scanning job.
When the Start/Stop key is pressed during a scanning

job, the job is cancelled.
If you press Start/Stop again after stopping scanning to

perform scanner settings, the settings display returns.
Displayed after pressing the Start/Stop key and scan-

ning stops.
Even if a document is still in the scanner, the JAM

message is not displayed. Open the ADF door and ADF
to remove the document in the scanner.

After the document in the scanner is removed, the Ready
message is displayed.

Displayed after the software application has been set to
start scanning at the press of the Start/Stop key. After

1

setting the document for scanning, press the Start/Stop
key to start the scanning job.

14

Setting up the scanner

Follow the instructions in this section to set up the scanner. Before you set up the scanner, make sure that
you have:

• Prepared a suitable location for the scanner (➞ 7)

• Unpacked the scanner and made sure that you have everything (➞ 9)

• Read all the precautions regarding safe use of the scanner (

Connecting the scanner

Follow this procedure to connect the scanner to the computer.

➞ 3 to 4)

1

2

Connect the SCSI cable and power
cord as shown in the illustration.

• Use only the power cord supplied with
the scanner.

• Confirm that the SCSI cable is a
shielded cable.

• The scanner uses a half-pitch 50-pin
(pin-type) SCSI connector. When con­necting the SCSI connector to another
device, such as a computer, select a
SCSI interface cable that is equipped
with the appropriate connector types.

• If the power cord has already been
connected, make sure the scanner is
switched off then disconnect the power
cord from the back of the scanner.

Make sure that the fan exhaust vent
is not blocked. There should be at
least 250 mm (9.8 in.) of open
space behind the scanner.

200 mm (7.9")

AC inlet

Power cord

SCSI connectors

SCSI interface
cable

To PC

To power source

250 mm (9.8")

300 mm (11.8")

3
4

WARNING! THE SCANNER COULD BECOME EXTREMELY HOT IF THE FAN EXHAUST

VENT IS BLOCKED, RESUL TING IN A FIRE. MAKE SURE THIS AREA IS CLEAR
AT ALL TIMES.

Turn on the scanner’s power. (➞ page 14)

• Be sure to turn on the scanner’s power before turning on the power to the computer.
When using daisy chain connection including other SCSI devices, check the SCSI ID and
terminator settings. (➞ page 24)

Power on the computer.

• With Windows 95, the first time you turn on the computer’s power after connecting the scan­ner, the driver installation prompt screen (“New Hardware Found” or “Update Device Driver
Wizard”) appears.
If the “New Hardware Found” screen appears, select “Select from a list of alternate drivers”,
click “OK”, then select “Unsupported Device” in the subsequent screen and click “OK”.
If the “Update Device Driver Wizard” screen appears, click “Next”, then click “Finish” in the
subsequent screen.

• You must install the scanner driver before using the scanner . Refer to the “ISIS/TW AIN Driver
User’s Manual.”

15