Canon CR-55 User Manual

Canon Check Reader
Startup Manual
Please read this manual before operating this unit. After you finish reading this manual, store it in a safe place for future reference.
Before Connecting the Canon CR-55
Install the accompanying software before connecting the Canon CR-55 to a computer.
STEP1 Install the Software
Installer Screen
Do not connect the CR-55 to a computer before installing the software. If you do connect the CR-55 before installing the software and the following dialog box is displayed, click [Cancel].
STEP2 Connect the CR-55 to the Computer
Use the accompanying USB cable to connect the CR-55 to the computer. (See p. 22.)
i
READ CAREFULLY BEFORE OPENING THE SEALED DISK PACKAGE
CANON SOFTWARE LICENSE AGREEMENT
IMPORTANT-READ THIS AGREEMENT BEFORE OPENING THE SEALED DISK PACKAGE! BY OPENING THE
SEALED DISK PACKAGE, YOU ARE DEEMED TO AGREE TO BE BOUND BY THIS AGREEMENT.
This legal document is a license agreement between you and Canon Electronics Inc. ("Canon"). BY OPENING THE SEALED DISK PACKAGE, YOU ARE DEEMED TO AGREE TO BE BOUND BY THE TERMS OF THIS AGREEMENT. TERMS OF THIS AGREEMENT, DO NOT OPEN THE SEALED DISK PACKAGE AND PROMPTLY RETURN THE CANON SCANNER, THE DISK PACKAGE CONTAINING SCANNER DRIVER SOFTWARE PROGRAMS AND/OR SCANNER UTILITY SOFTWARE PROGRAM PROPRIETARY TO CANON OR ITS LICENSOR (THE "SOFTWARE") AND THE ACCOMPANYING DOCUMENTATION AND OTHER ITEMS TO THE PLACE WHERE YOU OBTAINED THEM FOR A REFUND BEFORE THEY ARE USED OR OPENED OR UNPACKED.
In consideration of the right to use the SOFTWARE, you agree to abide by the terms and conditions of this Agreement.
1. GRANT OF LICENSE: Canon grants you the personal, non-exclusive right to use the SOFTWARE only on a single computer. You may
physically transfer the SOFTWARE from one computer to another provided that the SOFTWARE is used on only one computer at any time.
You shall not assign, sublicense, sell, rent, lease, loan, convey or transfer to any third party, or send or bring the SOFTWARE out of the country where you originally obtain it to other countries without required authorization of applicable governments, or copy, duplicate, translate or convert to another programming language the SOFTWARE or accompanying documentation, except as expressly provided herein.
Except as expressly permitted under the applicable law, you shall not alter, modify, disassemble, decompile or otherwise reverse engineer the SOFTWARE or accompanying documentation and you also shall not have any third party do so.
2. BACK-UP COPY: You may make one copy of the SOFTWARE solely for a back-up purpose or copy the SOFTWARE onto the permanent storage device (e.g. a hard disk) of your computer and retain the original for a back-up purpose. Except as expressly permitted under the applicable law, any other copying of the SOFTWARE is a violation of this Agreement. You must reproduce and include the copyright notice on the back-up copy.
3. SUPPORT AND UPDATE: Canon, Canon's affiliate, their distributor or dealer is not responsible for maintaining or helping you to use the SOFTWARE. No updates, fixes or support will be made available for the SOFTWARE.
4. LIMITED WARRANTY AND DISCLAIMER OF INDEMNITY: Canon, Canon's affiliate, their distributor or dealer will not guarantee uninterrupted service, or absence or correction of errors. Therefore, the SOFTWARE is licensed on an "AS IS" basis without warranty of any kind. The diskette on which the SOFTWARE is recorded is warranted against defective material or workmanship under normal use for a period of ninety (90) days from the date you purchased the same as evidenced by a receipt or otherwise. The limited warranty does not apply if the failure of the diskette resulted from accident, abuse or misapplication of the SOFTWARE and shall not extend to anyone other than the original user of the SOFTWARE.
CANON, CANON'S AFFILIATE, THEIR DISTRIBUTOR OR DEALER DISCLAIMS ALL IMPLIED WARRANTIES, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THE SOFTWARE OR ACCOMPANYING DOCUMENTATION.
NEITHER CANON, CANON'S AFFILIATE, THEIR DISTRIBUTOR NOR DEALER IS LIABLE FOR ANY LOSS OR DAMAGE INCLUDING CONSEQUENTIAL OR INCIDENTAL LOSS OR DAMAGE SUCH AS LOSS OF PROFITS, EXPENSE OR INCONVENIENCE, WHATSOEVER CAUSED BY OR ARISING OUT OF THE SOFTWARE, ACCOMPANYING DOCUMENTATION OR THE USE THEREOF.
CANON, CANON'S AFFILIATE, THEIR DISTRIBUTOR OR DEALER SHALL HAVE NO OBLIGATION TO INDEMNIFY YOU AGAINST ANY CLAIM OR SUIT BROUGHT BY A THIRD PARTY ALLEGING THAT THE SOFTWARE, ACCOMPANYING DOCUMENTATION OR THE USE THEREOF INFRINGES ANY INTELLECTUAL PROPERTY OF SUCH THIRD PARTY.
THE ABOVE IS CANON'S ENTIRE LIABILITY AND YOUR EXCLUSIVE REMEDY IN CONNECTION WITH THE SOFTWARE AND ACCOMPANYING DOCUMENTATION.
5. TERM: This Agreement is effective upon opening the sealed disk package and remains in effect until terminated. You may terminate this Agreement by destroying the SOFTWARE and any copy thereof. This Agreement will also terminate if you fail to comply with any of the terms of this Agreement. In addition to Canon enforcing its respective legal rights, you must then promptly destroy the SOFTWARE and any copy thereof.
6. U.S. GOVERNMENT RESTRICTED RIGHTS NOTICE: The SOFTWARE is provided with RESTRICTED RIGHTS. Use, duplication or disclosure is subject to restrictions as set forth in either subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARs 252.227-7013 or subparagraph (c) (1) and (2) of the Commercial Computer Software Restricted Rights Clause at FAR 52.227-19, as applicable.
7. SEVERABILITY: In the event that provision of this Agreement is declared or found to be illegal by any court or tribunal of competent jurisdiction, such provision shall be null and void with respect to the jurisdiction of that court or tribunal and all the remaining provisions of this Agreement shall remain in full force and effect.
8. ACKNOWLEDGEMENT: BY OPENING THE SEALED DISK PACKAGE, YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTOOD IT, AND AGREE TO BE BOUND BY ITS TERMS AND CONDITIONS. YOU ALSO AGREE THAT THIS AGREEMENT IS THE COMPLETE AND EXCLUSIVE STATEMENT OF AGREEMENT BETWEEN YOU AND CANON CONCERNING THE SUBJECT MATTER HEREOF AND SUPERSEDES ALL PROPOSALS OR PRIOR AGREEMENTS, VERBAL OR WRITTEN, AND ANY OTHER COMMUNICATIONS BETWEEN YOU AND CANON RELATING TO THE SUBJECT MATTER HEREOF. NO AMENDMENT TO THIS AGREEMENT SHALL BE EFFECTIVE UNLESS SIGNED BY A DULY AUTHORIZED REPRESENTATIVE OF CANON.
Should you have any questions concerning this Agreement, or if you desire to contact Canon for any reason, please write to Canon's local affiliate.
IF YOU DO NOT AGREE TO THE
ii
International ENERGY STAR® Office Equipment Program
As an E meets the E
NERGY STAR
NERGY STAR
The International E
®
Partner, Canon Electronics Inc., has determined that this machine
®
Program guidelines for energy efficiency.
NERGY STAR
®
Office Equipment Program is an international program that promotes energy saving through the use of computers and other office equipment. The program backs the development and dissemination of products with functions that effectively reduce energy consumption. It is an open system in which business proprietors can participate voluntarily. The targeted products are office equipment, such as computers, monitors, printers, fax, machine, copiers, and scanners. The standards and logos are uniform among participating nations.
Trademarks
•Canon and the Canon logo are registered trademarks of Canon Inc. in the United States and may also be trademarks or registered trademarks in other countries.
•Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and other countries.
• Intel and Pentium are registered trademarks of Intel Corporation.
•ENERGY STAR® is a U.S. registered mark.
•Adaptec is registered trademark of Adaptec Inc.
•Other product and company names herein may be the trademarks of their respective owners.
Copyright
Copyright 2005 by CANON ELECTRONICS INC. All rights reserved.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or by any information storage or retrieval system without the prior written permission of CANON ELECTRONICS INC.
Disclaimers
The information in this document is subject to change without notice. CANON ELECTRONICS INC. MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL, EITHER EXPRESS OR IMPLIED, EXPECT AS PROVIDED HEREIN, INCLUDING WITHOUT LIMITATION, THEREOF, WARRANTIES AS TO MARKETABILITY, MERCHANTABILITY, FITNESS FOR A PA RTICULAR PURPOSE OF USE OR NON-INFRINGEMENT. CANON ELECTRONICS INC. SHALL NOT BE LIABLE FOR ANY DIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY NATURE, OR LOSSES OR EXPENSES RESULTING FROM THE USE OF THIS MATERIAL.
iii
INTRODUCTION
Thank you for purchasing the Canon CR-55 Check Reader scanner. Please read this manual thoroughly before using the machine to familiarize yourself with its capabilities, and to make the most of its many functions. After reading this manual, store it in a safe place for future reference.
Manuals for the Check Reader
The Canon CR-55 Check Reader has a Startup Manual (this manual) and online help.
Please refer to the Startup Manual regarding the handling of the scanner, such as installation of software and setting up the scanner. The online help explains how to use the enclosed software, Scanning Utility for CR-55.
Canon Check Reader
Startup Manual
Please read this manual before operating this unit. After you finish
reading this manual, store it in a safe place for future reference.
Startup Manual
Explains how to set up the scanner, make connections, install software, and other procedures.
Be sure to read it before using the scanner.
Canon Check Reader
Startup Manual
Please read this manual before operating this unit. After you finish
reading this manual, store it in a safe place for future reference.
Installing the Scanner (See p. 15.) Installing the Scanning Utility (See p. 17.)
Canon Driver Help
Explains how to use the Canon Driver for CR-55.
Scanning Utility Help
Explains how to use the Scanning Utility for CR-55.
INTRODUCTION 1
Symbols Used in This Manual
The follwing symbols are used in this manual to explain procedures, restrictions, handling precautions, and instructions that should be observed for safety.
WARNING Indicates a warning concerning operations that may lead to death or injury to persons if not performed correctly. To use the machine safely, always pay attention to these warnings.
CAUTION Indicates a caution concerning operations that may lead to injury to persons, or damage to property if not performed correctly. To use the machine safely, always pay attention to these cautions.
IMPORTANT
Indicates operational requirements and restrictions. Be sure to read these items carefully to operate the machine correctly, and avoid damage to the machine.
Note
Indicates a clarification of an operation, or contains additional explanations for a procedure. Reading these notes is highly recommended.
2 INTRODUCTION
Contents
INTRODUCTION.......................................................................................................... 1
Manuals for the Check Reader......................................................................................... 1
Symbols Used in This Manual........................................................................................ 2
Before Using the Scanner ......................................................................................... 4
Important Safety Instructions ......................................................................................... 4
Installation Location ......................................................................................................... 4
Power ............................................................................................................................... 5
Moving the Scanner ......................................................................................................... 5
Handling ........................................................................................................................... 6
Disposal ............................................................................................................................ 7
Features of the CR-55.................................................................................................... 8
Checking the Packing List .............................................................................................. 9
Removing the Protective Packing Tape .......................................................................... 10
Names and Functions of Parts ..................................................................................... 12
Installing the Scanner .............................................................................................. 15
Installation Requirements ............................................................................................ 15
Installation Procedure .................................................................................................. 16
Installing the Scanning Utility ....................................................................................... 17
Connecting the Power Cord ......................................................................................... 21
Connecting the Scanner to Your PC ............................................................................. 22
Tu r ning the Power ON/OFF .......................................................................................... 23
Tu rning the Power ON .................................................................................................... 23
Tu rning the Power OFF .................................................................................................. 26
Installing the Ink Cartridge ........................................................................................... 27
Installation Procedure .................................................................................................... 27
Scanning Utility Software ........................................................................................ 31
Using the Scanning Utility ............................................................................................ 31
Uninstalling the Scanning Utility ................................................................................... 34
Using the Scanner.................................................................................................... 37
Documents ................................................................................................................... 37
Document Types ............................................................................................................. 37
Placing Documents ........................................................................................................ 38
Calibrating Paper Thickness ........................................................................................ 40
Adjusting the Print Position .......................................................................................... 43
Double Feed Detection ................................................................................................ 44
Regular Maintenance ............................................................................................... 45
Cleaning the Scanner ..................................................................................................... 45
Cleaning the Inside of the Scanner ................................................................................ 45
Cleaning the Sensor Glass and the Rollers ................................................................... 46
Cleaning the Magnetic Heads ........................................................................................ 49
Cleaning Around the Ink Head and Ink Absorber ........................................................... 50
Replacing the Ink Cartridge ......................................................................................... 53
Troubleshooting ....................................................................................................... 55
Clearing a Paper Jam .................................................................................................. 56
The Scanner Does Not Turn ON .................................................................................. 57
The PC Does Not Recognize the Scanner................................................................... 58
Scanning Is Slow.......................................................................................................... 58
Images Are Not Scanned ............................................................................................. 59
Documents Do Not Feed Properly ............................................................................... 59
Scanned Images Are Not Correct ................................................................................ 60
Specifications ........................................................................................................... 61
Index .............................................................................................................63
Contents 3
Before Using the Scanner
Important Safety Instructions
In order to ensure safe operation, be certain to read the cautions described below.
Installation Location
The performance of this scanner is affected by the environment in which it is installed. Make sure that the location where the scanner is installed meets the following environmental requirements:
• Avoid locations exposed to direct sunlight. If the scanner must be placed in such a spot, hang a heavy curtain, or similar object to shade the scanner.
• Avoid dusty locations. Dust can get inside the scanner and cause problems.
• Avoid warm or humid locations, such as in the vicinity of a water faucet, water heater, or humidifier, and avoid locations where the fumes from ammonia, paint thinner, or other volatile chemicals may be present.
• Avoid unstable surfaces and locations subject to vibration.
• Avoid locations that are subject to rapid temperature changes. Condensation inside of the scanner can result in inferior image quality. Use this scanner under the following environmental conditions:
Temperature: 10˚C to 32.5˚C (50˚F to 90.5˚F) Humidity: 20% to 80% RH
20% to 50% RH when using the imprinter
• Avoid locating the scanner near equipment that generates electromagnetic fields, including speakers, televisions, and radios.
4 Before Using the Scanner
Power
• Connect only to a power outlet of the rated voltage and power supply frequency (either 120 V, 60 Hz or 220-240 V, 50/60 Hz, depending on your region).
• Do not connect to power outlets with other electrical devices. Also, when using an extension cord, make sure that the extension cord is rated for the current requirements of the scanner.
• Disassembling and/or reassembling the AC adapter is extremely dangerous and should not be attempted under any circumstances.
• Do not place heavy objects on the AC adapter or power cord. Do not place the adapter or cords in an area where they are likely to be stepped on.
• Do not use the power cord while it is bundled.
• Never pull directly on the power cord. To remove the plug from the outlet, grasp the plug directly and remove it from the outlet.
• Keep the area around the power plug clear of articles so that the power plug can be disconnected in an emergency.
Use only the AC adapter provided with the product. Do not use the scanner’s AC adapter with any other product.
Model: MG1-3607
• If you have any questions about the AC adapter, contact your local authorized Canon dealer or service representative for further information.
Moving the Scanner
• The scanner weighs approximately 4.4 lb (2 kg). When moving the scanner, always hold it with both hands to avoid dropping it. If held with one hand it can fall and be damaged or break.
• Make sure to disconnect the interface cable and power cord. If the scanner is transported with these items plugged in, the plugs and connectors may be damaged due to physical shock.
Before Using the Scanner 5
Handling
WARNING
• Do not place flammable chemicals, such as alcohol or paint thinner, near the scanner.
• Do not cut, damage, or modify the power cord. Do not place heavy objects on the power cord, do not pull on the power cord, and do not bend the power cord sharply.
• Do not plug in or unplug the power cord with wet hands.
• Do not use multioutlet adapters to connect multiple devices to one outlet.
• Do not tie up or bundle the power cord. Push the plug in as far as it will go when plugging in the power cord.
• Only use the power cord that was provided with this scanner.
• Do not attempt to disassemble or modify this scanner.
• Do not use flammable sprays near this scanner.
• Always turn the scanner OFF and unplug the power cord before cleaning this scanner.
• To clean this scanner, dampen a cloth in a mild detergent solution and then wring the cloth out thoroughly. Do not use flammable liquids to clean the scanner, including alcohol, benzene, or paint thinner.
• If the scanner ever makes a strange noise, emits smoke or a strange odor, becomes hot, or if the scanner does not operate at all even though the power is ON, immediately turn the scanner OFF and unplug the power cord. Contact your local authorized Canon dealer or service representative to have the scanner serviced.
• Do not drop, kick, or otherwise strike the scanner. If the scanner does somehow become damaged, immediately turn the scanner OFF and unplug the power cord. Contact your local authorized Canon dealer or service representative to have the scanner serviced.
• Always turn the scanner OFF and unplug the power cord before moving the scanner.
CAUTION
• Do not install the scanner on a wobbly platform, a sloped surface, or any other type of unstable location. Do not install the scanner in a location that is subject to vibration. The scanner could injure someone if it falls or tips over.
• Do not block the ventilation openings. Doing so could cause the scanner to overheat, creating a risk of fire.
6 Before Using the Scanner
• Do not place paper clips, staples, necklaces, or any other metallic objects on top of the scanner. Liquids or small metallic objects that get inside of the scanner create a risk of fire or electrical shock. If such foreign matter does get inside of the scanner, unplug the power cord immediately, and then contact your local authorized Canon dealer or service representative for assistance.
• Do not install the scanner in a dusty or humid location. Doing so creates a risk of fire or electrical shock.
• Do not place objects on top of the scanner. The object could injure someone if it falls or tips over.
• To prevent any risk of fire or electrical shock, be sure that the power source meets the power requirements of the scanner.
• When unplugging the power cord, always grasp the plug. Pulling on the cord itself could expose or break the wires in the power cord, damaging the cord and creating a risk of fire or electrical shock.
• To allow you to easily unplug the power cord at any time, do not place other objects around the power outlet. Such obstacles could prevent you from unplugging the power cord quickly in an emergency.
• Do not spill liquids or flammable chemicals (such as alcohol, paint thinner, or benzene) on the scanner. Doing so creates a risk of fire or electrical shock.
• If the scanner will not be used for an extended period of time, unplug the power cord for safety’s sake.
• When operating this scanner, avoid wearing loose fitting clothing, dangling jewelry, or other material that could get pulled into the scanner. Injury could result. Be especially careful if you are wearing a necktie or have long hair. In the event that some article or clothing does get caught in the scanner, turn the power OFF immediately.
• Be careful when placing paper in the scanner and when removing jammed paper. It is possible to cut your hand on the edge of a sheet of paper.
Disposal
When disposing of this scanner, be sure to follow all local ordinances and laws or consult with the retailer who sold you the scanner.
Before Using the Scanner 7
Features of the CR-55
The Canon CR-55 Check Reader is a scanner with magnetic heads that can read checks and other documents that are printed with MICR (Magnetic Ink Character Recognition) compatible fonts and is capable of OCR (Optical Character Recognition).
The main features of the CR-55 are listed below.
Compact Size
5.5" x 8.8" x 7.4" (W x D x H), 140 mm x 223 mm x 188 mm (W x D x H)
Supports Large Documents
Documents up to 4.2" x 9.0" (106 mm x 228 mm) can be scanned.
USB 2.0 Interface
Connecting to a computer is done with Hi-Speed USB 2.0 protocol.
Color/Grayscale Support
Documents can be scanned in 24-bit color or 256-level grayscale in addition to black & white.
Reads MICR Characters
A magnetic head is used to scan MICR characters that have been printed with magnetic ink or toner.
Supports OCR (Optical Character Recognition)
Character images, such as E13B, OCR-A, OCR-B, and check writer are recognized as characters by the OCR function.
Easy Maintenance
Maintenance covers make handling paper jams and cleaning easy.
Imprinter
An imprinter mechanism, which prints text on documents as they are scanned, comes standard equipped with the scanner. The imprinter’s ink cartridge is not included, and must be purchased separately. (See p. 27.)
Paper Thickness Adjustment Dial
Adjusts the gap between the separation roller and feeding roller to the thickness of the paper being fed. (See p. 42.)
Double Feed Detection Sensor
The scanner can detect double fed documents via an infrared sensor. (See p. 44.)
Note
Some functions may not be available depending on the software you are using.
8 Before Using the Scanner
Checking the Packing List
The contents of the carton in which this scanner is shipped are described below. If anything is missing or damaged, contact your local authorized Canon dealer or service representative.
CR-55 Scanner
C
a
n
o
n
C
h
e
c
S
k
t
a
R
r
t
e
u
a
p
d
M
e
a
n
u
a
l
P l e
r
a
e
s
a
e
d
r i n
e
g
a
d t h
t
i
h
s
i s
m
m
a
n
a
u
n
a
u
l
a
,
l
s
b t o
e
r
f
e
o
r
i
e
t
i
o
n
p
a
e r
s
a
a
t
f
i n
e
g
p
t l a
h
c
i s
e
u f o
n
r
i t .
f
u
A
t
f
u
t
e r e
r
y r e
o
f
u e r
f
e
i n
n
i s
c
h e .
Startup Manual (This Manual)
AC Adapter
r
CR-55 Setup Disc
Power Cord
USB Interface Cable
(CD-ROM)
Warranty Card (U.S.A. and Canada only)
Registration Card (U.S.A. and Canada only)
Note
• Remove all of the protective tape from the CR-55. (See “Removing the Protective Packing Tape,” on page 10.)
• The CR-55 setup disk is in the Startup Manual (this manual).
• Items included in this package may change without notice.
• Keep the carton and the packing material for future use if it is ever necessary to store or transport the scanner.
Before Using the Scanner 9
Removing the Protective Packing Tape
Remove all of the protective packing tape before using the scanner.
1
Remove the protective tape (indicated by the ▼) from the scanner.
2
While lowering the OPEN lever, open the reading unit.
Reading Unit
10 Before Using the Scanner
3
Remove the protective tape (indicated by the ▼) from the reading unit.
4
Gently close the reading unit until it clicks into
4
Gently close the reading unit until it clicks into place.
Before Using the Scanner 11
Names and Functions of Parts
This section explains the name and function of each part. Familiarize yourself with the parts before installing the scanner.
Front View
Document Eject Opening
Eject Stopper
Adjust to match the length of the document. (See p. 39.)
Document Feed Tray
Pull out to load documents. (See p. 38.)
Document Feed Opening
Imprinter Cover
Maintenance Cover
Open this cover to clear paper jams or clean the scanner. (See p. 46 and p. 56.)
Paper Thickness Adjustment Dial
Adjust the gap between the separation roller and feeding roller to the thickness of the paper being fed. (See p. 42.)
Power Indicator
Lights green when the power is turned ON. (See p. 23.)
12 Before Using the Scanner
Inside of the Imprinter Cover
Lock Lever
Locks the ink cartridge in place. (See p. 29 and p. 54.)
Inside of the Maintenance Cover
Ink Cartridge
The ink cartridge is not included, and must be purchased separately. (See p. 27.)
Print Position Adjustment Lever
Adjusts the print position. (See p. 43.)
Ink Absorber
Absorbs any ink that leaks out of the ink cartridge. (See p. 50.)
Separation Roller
Separates a stack of documents into single sheets one by one. (See p. 42.)
Feeding Roller
Feeds the document. (See p. 42.)
Magnetic Heads for MICR
Reads MICR text printed in magnetic ink. (See p. 49.)
Before Using the Scanner 13
Rear View
Connectors/ Power Switch
Connectors/Power Switch
Reading Unit (Access Hatch)
Open to clear paper jams or clean the scanner. (See p. 46 and p. 56.)
Power Switch
Turns the scanner power ON or OFF. (See p. 23 and p. 26.)
Power Connector
Connect the included AC adapter plug. (See p. 21.)
USB Connector
Connect a Hi-Speed USB 2.0 compliant USB cable. (See p. 22.)
14 Before Using the Scanner
Installing the Scanner
Installation Requirements
In order to use the CR-55, your computer must satisfy the following system requirements:
• A computer that meets the following specifications:
• CPU: Pentium 4 (1.5 GHz or higher)
• Memory: 256 MB or more
• Hard disk: 400 MB or more available space
• CD-ROM drive
•Hi-Speed USB 2.0 interface
• Extension slot: PCI or CardBus (for interface cards)
• Monitor: Resolution of 1024 x 768 (XGA) or better recommended
•Use the standard equipped Hi-Speed USB 2.0 interface,or use one of the following interfaces that are recommended for this scanner:
• Adaptec USB 2.0 interface cards (PCI bus type)
• USB2connect2000LP (AUA-2000)
• USB2connect3100 (AUA-3100LP)
• USB2connect5100LP (AUA-5100)
• Adaptec USB 2.0 interface cards (card bus type)
• USB2connect for Notebooks (AUA-1420)
• One of the following operating systems:
•Microsoft Windows 2000 Professional SP3 or later
•Microsoft Windows XP Professional SP1 or later
•Microsoft Windows XP Home Edition SP1 or later
IMPORTANT
• Use the most recent version of the USB 2.0 driver provided by Microsoft. Contact your local authorized Canon dealer or service representative for more detailed information.
Computer operations are not guaranteed for all standard equipped computer USB interfaces. If the computer’s standard USB interface does not operate normally, then use a recommended Hi-Speed USB 2.0 interface card.
• The USB cable you use should be the one originally bundled with the scanner, or a Hi-Speed USB 2.0 compatible cable.
If the CPU, memory, interface card, and other specifications do not satisfy the installation requirements, the scanning speed may be greatly reduced and transmission may take a long time.
• Even if the computer satisfies the recommended specifications, the scanning speed may vary, depending on the scan settings.
• Make sure that the device driver and application software that you will be using are compatible with your PC, the system configuration, and the type of interface card that you are using.
Installing the Scanner 15
Installation Procedure
When installing the CR-55 for the first time, be sure to install the accompanying application software before connecting the CR-55 to the computer.
The procedure for installing the scanner is outlined below.
1. Install Scanning Utility for CR-55. (See “Installing the Scanning Utility,” on p. 17.)
2. Connect the power cord to the scanner. (See “Connecting the Power Cord,” on p. 21.)
3. Connect the scanner to the PC. (See “Connecting the Scanner to Your PC,” on p. 22.)
4. Turn ON the scanner. (See “Turning the Power ON,” on p. 23.)
Note
Do not connect the CR-55 before installing the accompanying application software. Connecting the CR-55 to a computer before installing the application software will cause the Found New Hardware Wizard to appear. If this happens, click [Cancel] to exit the wizard.
16 Installing the Scanner
Installing the Scanning Utility
Scanning Utility for CR-55 is dedicated application software for the CR-55. After installing the scanning utility, the installer proceeds to install the CR-55 device driver.
1
Turn ON your computer. Windows starts.
2
Log on as a user with Administrator privileges.
3
Insert the setup disc into the PC’s CD-ROM drive.
4
Click the [Start] button, and then select [Run].
The [Run] dialog box appears.
5
In the Open box, enter “D:\SU55\SETUP.EXE” (assuming that “D” is the letter assigned to your CD-ROM drive), and then click the [OK] button.
The installer starts.
Installing the Scanner 17
Loading...
+ 49 hidden pages