This camera complies with the industry standard “PictBridge”*. This allows you to also connect your camera to non-Canon PictBridge compliant printers and print images with simple operations using the camera buttons.
*PictBridge: PictBridge is an industry standard fordirect printing that
allows you to print images without using a computer by directly connecting digitalcameras and digital camcorders (hereafter “camera”) to a printer, regardless ofthe devices’ brand and model.
Disclaimer
•No part ofthis guidemay be reproduced, transmitted,transcribed,storedin a retrieval system, or translated into any language in any form, by any means, withoutthe prior writtenpermission ofCanon.
•Canon reserves therightto change thespecifications of the hardware described herein atany time withoutprior notice.
•While every effort has been made to ensure that the information contained in this guide is accurate and complete, no liability can be accepted for any errors or omissions.
•Canon makes nowarranties for damages resultingfrom corrupted or lost data due to a mistakenoperationormalfunction of the camera,thesoftware,the memory cards,personalcomputers, peripheral devices, or use ofnon-Canon memory cards.
Trademark Acknowledgements
•Names and products in this guide may be registered trademarks or trademarks of their respective companies.
Connect your camera to the printer with the appropriate cable. Image selection and printing is operated from the camera.
Various Printing Operations Can Be Performed*
Prints to cover the entire surface ofthe paper.Or,prints with a border.
03/04/2005
Add the date.
Specify which portionofthe image to print.(Trimming)
Multiple pictures can be printed at once. (DPOF print setting*)
*Some settings may not beselectablefor Non-Canon printers.
6
You Can Also Perform the Following Printing Operations
Using Canon SELPHY CP Series Printers
An image can be trimmed, laid out and printed as IDphotos. (ID photoprint(p.20orp.55))
1"25
2"50
3"75
107-J006
7"50
8"75
13"75
15"00
20"00
21"25
Movie frames can be extracted at fairlyregular intervals and printed on a singlesheet of paper.(Movie print (p.23 orp.58))
6"25
12"50
18"75
*Depending on the printer used, the print sizemay be fixed before printing.
Using Canon Printers (PIXMA series/SELPHY series)
with PictBridge
Compositions ofmultipleimages you specify of the same dimensions can be printed on a single sheetof paper (p.19orp.39). (This function is not available on some printers.)
Moreover, the DPOF print setting* function allows you to separately print different images by specifying thenumber offrames tobe printed perimage.
*DPOF print settings
This function allows you to preset the images andthe number ofcopies using the camera button controls. The settings are recorded to a memory card.Please refer to theCamera User Guidefor instructions on setting procedure.This guide explains how toprintimages withDPOF print settings. DPOF=Digital Print Order Format
5"00
10"00
11"25
16"25
17"50
22"50
23"75
7
Connecting the Camera to the Printer
Connect the camera to the printer. For instructions on printer and camera operation methods, refer to their respective user guides.
Set one of the following into the camera.
•Compact power adapter (sold separately)
•Fully charged battery
•New batteries
Place paper, inkcassette/cartridge, etc. into the printer.
Connect the camerato the printer with the appropriate interface cable supplied with the camera.
DIGITAL terminal
Camera:Connect the cable to
the DIGITAL terminal.
Printer:Refer to the printer’s
user guide.
This illustration shows the PowerShotSD500 DIGITAL ELPH/DIGITAL IXUS 700 as an example.
Some printers require specific connection cables which differ from the above cable. Please refer to the printer’s user guide.
Turnthe printer’s poweron.
Set the camera to Playbackmode and turn the power on.
Depending on the camera model, the camera’s power will automatically turn on when the printer’s power is turned on.
The following operations are not available during a camera/printer connection.
•Movie playback.
•Language settings thatusethe SET button andthe MENU button.
8
•Resetting the camera’s settings to default.
Disconnecting the Camera and the Printer
Detach the cable from the printer.
Pull out the cable while holding the connector plug. Do not pull out by the cable.
Turn the camera’spower off.
Detach the cable from the camera.
Pull out the cable while holding the connector plug. Do not pull out by the cable.
9
Printing with SELPHY
CP Series Printers using
PictBridge
Printing
Easy Print
You can print images by pressing only one button after connecting the camera to the printer.
Make sure that displays in the upperleft corner of the LCD monitor.
1
Display the images you wish to print and press the
2
button.
If you wish to change the print settings, see Print after Changing the Print Settings (p.11).
10
Print after Changingthe PrintSettings
You can change the print settings before printing.
Make sure that displays in the upper left corner of the LCD monitor.
1
If displays on the LCD monitor, please refer to Printing with
SELPHY CP Series Printers using Canon Direct Print(p.48).
Display theimages you wish
Sets the printeffect (p.14)
Sets the dateand the file numberfor printing(p.13).
to print and press the SET button.
The print order screen appears.
Dependingon the printermodel,some setting options may not display.
2
Sets the number of copies (p.14).Sets the trimming portion (p.15).
Sets the paper size,type and layout(p.17).
Starts the printing process.
Print Order Screen
Select print settings asneeded.
3
Select [Print] and press the SET button.
•The image will start to print and, when it is completely finished, the display will revert to the standard playback
4
mode.
•If you press theMENU button, the display will revert to the standard playback mode and printing will not take place.
11
•You cannot print the RAW images.
•It may not be possible to play back or print images shot with a different camera.
•You may not be able to print if the memory card holds a large number of images (about 1000).
Cancel Printing
•To cancel printing between images, press the SET button.A confirmation dialog will display. Select [OK] and press the SET button.The printer will stop printing the current image and eject the paper.
Printing Errors
•An error message appears if an error occurs for some reason during the printing process. When the error is resolved, printing will automatically resume. If printing does not resume, select [Continue] and press the SET button. If [Continue] cannot be selected, select [Stop], press the SET button and restart the print job. SeeList of Messages (p.28) for details.
12
Selecting Print Settings
Depending on the camera model, the screens that will be displayed will vary. Please also refer to the user guide that came with your printer.
Default Setting
•The Default option is a fixed setting of the printer.
•The [Date/File No.], [Print Effect], paper setting [Paper Size], [Paper Type] and [Page Layout] options are available.
Setting the Date and the FileNumber Printing Option
Select [], then select thedate and the file number printing option.You can set the date and the file number printing as follows:
1
DatePrints only the date.File No.Prints only the file number.
Prints boththe date and the
Both
file number.Prints neither date nor file
Off
number.Prints using the default
Default
setting.
If you select an image which has had the shooting date embedded in itusing a camera with the Postcard Print mode, [] will be set to[Off]. If you select [Date], [File No.] or [Both], the date/file number will be printed on the embedded information which is also printed.
13
Setting the Print Effect
This function uses the camera’s shooting information to optimize the image data, yielding high quality prints. You can select thefollowing print effects.
On
OffPrints without any effects.DefaultPrint settings differ according to your printer model.
Uses the camera’s shooting information todeliver beautiful prints.
Select [] and choose a print effect option.
1
Setting the Number of Copies
Select [] and set thenumber of prints.
1 to 99 copies can be set.
1
14
Setting the Printing Area (Trimming)
You can specify a portion of the image for printing.Please set [Paper Settings] (p.17) before setting the trimming settings. If [Paper Settings] is changed after having made the trimming settings, you must select the settings again.
Select [Trimming] and press the SET button.
The trimming frame will appear at the center of the image. If a trimming setting has already beenselected for the image, the frame will appear around the previously selected portion.
1
Trimming Frame
The trimming setting screendiffers depending on the camera model.Ensure that the screen appears before selecting settings.
15
Trim the image.
Changing the Size of the Trimming Frame
•Press the zoom lever or thezoom button to adjust the size of the trimming frame.
•The trimming frame can be changed to a minimum selection of approximately half the displayed image (in width and height) or a maximum selection that is virtually the same size as the image.
•Expanding the trimming frame beyond its maximum size cancels the trimming setting.
2
•When printing an image that has been magnified using the trimming option, the image quality may become coarser and grainier depending on the level of magnification.
Moving the Trimming Frame
•Move the trimming frame using the omni selector or the up, down, right and left buttons.
Rotating the Trimming Frame
•You can rotate the trimming frame by pressing the DISP. (orDISPLAY) button.
Press the SET button to close the setting menu.
3
Pressing the MENU button cancels the settings.
•The trimming setting only applies to one image.
•The trimming setting is canceled with the following operations.
•When you set the trimming settings for another image.
•When you close the Print mode (when you turn the camera power off, change the camera mode, or detach the connection cable).
•The date or part of the date in images shot in [Date Stamp] mode with a camera that has the Postcard Print mode may not be printed properly depending on the trimming setting.
16
•Thepapersize and page layoutsettings determine the shapeof the trimming frame.
•Please use the LCD monitor to set the trimming settings. Thetrimming frame may not display correctly on a TVscreen.
Selecting the Paper Settings
Select [Paper Settings] and press the SET button.
The paper size setting screen
1
2
appears.
Select a paper size and pressthe SET button.
The default settings and specified paper cassette size are displayed.
The paper type setting screen appears.
*Paper sizes vary according to region.
Press the SET button.
The page layout screen appears.
3
17
4
Select a layout.
The following layout can be selected.
DefaultPrint settings differ
BorderedPrints with a border.BorderlessPrints right to the edges
N-upPrints 2, 4 or 8 images on
ID PhotoSpecifies the print size
Fixed SizePrints by specifying the
according to your printer model.
of the paper.
a singlesheet ofpaper(p.19)
and print portion of an image or a whole imageas an ID photo (p.20)
print size of the imageona sheet of paper (p.22).
18
Printing Multiple Images on a Sheet of Paper
Selecting [N-up] in the layout setting (p.18) will allow you to specify the following layout settings.
2 images (height 2 x width 1) ofthe same dimensions are
2
arranged ona single sheetof paper.4 images (height 2 x width 2) ofthe same dimensions are
4
arranged ona single sheetof paper.8 images (height 4 x width 2) ofthe same dimensions are
8*
arranged ona single sheetof paper oralabel sheet.
*This option can only be selected when printing on credit card size
paper.
[Printing example 1] Printing 3copies of imageA in 2-up
Number ofcopies (p.14)
Layout2
DPOF printsetting (p.25) allows you toseparately print differentimages by specifying the number of frames to be printed per image.
[Printing example 2] Printing 2 copies ofimage A and 1 copy of imageB in 4-up
DPOF print settings*(p.25)
Layout4
Image A:[3] copies
Image A:[2] copiesImage B:[1] copies
*Please refer to the Camera User Guide for instructions on
DPOF print setting method.
19
Printing by Specifying the Print Size (ID Photo Print)
Selecting [ID photo] in the layout setting (p.18) will allow you to specify the print size and print portion of an image or a whole image as an ID photo*.
*Images printed with theIDPhoto Print function may not be allowed
as a formal certificate photo. Refer to the party (organization) oradministrationrequiring the photo.
The print size can be specified for only L (Large)resolution images in the camera connected to the printer.
Select [ID Photo], then press the SET button.
T
Specify the print sizeby selecting the length of the long side and the short side, then press the SET button.
Specify the size by selecting thelength of the long side first, then the short side. See the next table for selectable combinations of the long side length and the short side length.
20
Loading...
+ 50 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.