Cannon FITZROY PROFILE INBUILT User Manual
MAKER’S WARRANTY
Cannon
FITZROY PROFILE
INBUILT MODELS
FITZPIB, FITZPIBLP
USER INSTRUCTIONS
INSTALLATION INSTRUCTIONS
SERVICE INSTRUCTIONS
This heater is approved for use with Natural and Propane gases.
Please leave instructions with the owner
Contents
Contents 2
Warranty 3
Safety warnings 4-5
❍ What to do if you smell gas
❍ Warnings
❍ Standards
User instructions 6-8
❍ Operating instructions
❍ Cleaning
Heater specifications 9
Installation instructions 10-14
❍ Clearances
❍ Fitment of cabinet depth spacer
❍ Installation into a masonry fire place
❍ Sealing
Gas connection 15-16
❍ Fuel bed & log installation
Gas control 17-18
❍ Gas pressure point
❍ Gas pressure adjustment
Service instructions 19
❍ General
❍ To replace the gas control
❍ To replace the fan
❍ To replace the electronic controller
❍ To remove the burner and electrodes
❍ To check pressures
Trouble shooting 19-22
❍ Connections
❍ Electrical wiring diagram
Authorised service agents 22
2
Warranty
The Cannon appliance is warranted against defects in materials
and workmanship for a period of one, (1) year from its date of
original purchase, for residential use in Australia.
Warranty service, which includes parts and labour for the replacement or repair of defective parts, is available through Cannon
Authorised Service Agencies. (Please refer to the list of authorised
service agents in this manual.)
Consumers are responsible for service person’s travel outside normal service areas (approximately seventy (70k) radius from the
nearest Cannon dealer’s location), local cartage, and normal maintenance as described in this manual.
Any product subjected to misuse, abuse, negligence, accident or
alteration will have its warranty voided. The defacement of serial
plate will have its warranty voided.
If installation is not carried out in accordance with manufacturer’s
instructions, this warranty may be void.
The customer must keep their “Tax Invoice” as proof of purchase of
this product and compliance certificate as proof of required installation.
Model number: ______________________________________
Serial number: _______________________________________
Date of manufacture: _________________________________
Date installed: _______________________________________
Compliance Certificate No: ____________________________
Designed, manufactured and distributed by:
Sampford and Staff Pty Ltd.
421 Smith Street
Fitzroy, Vic, 3065
Tel: (03) 9418 5888
Don’t risk your appliance warranty
Only a licensed person will give you a Compliance Certificate, showing that the work complies with all the relevant
standards.
And only a licensed person will have insurance protecting
their workmanship for 6 years.
So make sure you use a licensed person to install this appliance and ask for your Compliance Certificate to ensure the
manufacturers appliance warranty will be honoured.
3
Safety Warnings
Please read this manual before installing and using the heater.
What to do if you smell
gas
Warnings
4
1. Turn OFF the main gas supply.
2. Extinguish any open flame.
3. Open windows.
4. Do not touch electrical switches.
5. Do not use your telephone.
6. Call your gas supplier immediately from a neighbour’s phone.
1. Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. Refer to other
sections of this manual for correct procedures, or consult with
place of purchase, a licensed plumber, a gas supplier or
service agent listed in this manual.
2. Due to high temperatures the room heater should be located
out of traffic and away from:
• Furniture and draperies,
• Combustible materials,
• Gasoline and other flammable liquids,
Do not place clothing or other flammable material on or near
the heater.
3. Keep curtains*, clothing, furniture and other flammable materials at least 900mm from front and sides of the heater.
* At the owner’s discretion curtain clearance can be less than
900mm as long as they are restrained from the front, top and
sides of the heater. The manufacturer takes no responsibility if
curtain clearance is less than 900mm and not restrained.
4. Children and adults should be alerted to the hazard of high
surface temperature and should take care to avoid burns or
clothing ignition.
This heater is not intended for use by young children or infirm
persons without supervision.
Young children should be carefully supervised when they are
in the same room as the heater.
Young children should be supervised to ensure that they do
not play with the heater.
5. Never attempt to burn paper or any other material in the
heater.
6. Do not spray aerosols in the vicinity of this appliance while it
is in operation.
Do not place articles against, or store flammable materials
near this appliance
7. If removed the glass window must be put back onto the unit
prior to operating the heater.
8. Installation and repairs should be performed by a licensed
service person only, refer to back of brochure for service number.
9. For installation into a non-combustible fireplace, i.e.: masonry
or brick or into a mock fireplace, i.e. timber or plasterboard,
the chimney and base should be of sound construction and be
free from cracks and holes (to ensure that sufficient flue draught
can be generated).
NOTE: WHEN INSTALLING INTO A MOCK FIREPLACE A
MOCK FIREPLACE INSTALLATION KIT MUST BE USED.
10. The heater must be properly installed in a working chimney or
connected to a venting system. Operation of this heater, when
not connected into a working chimney or a properly installed
and maintained venting system can result in carbon monoxide
(CO) poisoning and possible death.
11. The appliance should be inspected prior to use, with regular
inspections (annually) to be made by a licensed service person. It is important that circulating air passageways of the
appliance be kept clean, dirt and lint free, for a safe and
efficient operation of the heater.
12. On first lighting your heater a smell may occur due to it’s new
condition. This is quite normal and will disappear after a few
hours use at the maximum control position.
Important:
WHEN THIS HEATER IS OPERATING, THE MESH GUARD IS HOT.
The mesh safety guard fitted to the heater conforms to AGA requirements.
For heaters fitted with the optional glass front it should be noted that
THE GLASS FRONT IS HOT.
For permanent protection of young children or the infirm a secondary guard should be placed around the heater. A secondary guard
is not provided with this heater and may be purchased by the
owner.
Standards
This appliance meets the following standards:
Standards Australia: AS 3100
AS 5601/AG 601
AS 4553/AG 103
5
User instructions
Operating instructions
1. Plug the power cord into the wall socket and turn on the power
to the heater, see figure 1. Refrain from using an extension
cord.
1
2. For control layout refer to figure 2
2
3. To turn heater on press switch to POWER ON position. There
is a 5 second delay before the burner ignites. At this setting the
burner is on LOW and the fan speed is on LOW. Refer
figure 3.
The burner will ignite on both HIGH and LOW settings.
3
4. To turn burner to HIGH setting, press switch for HIGH setting.
Refer figure 4.
4
6
5. To increase the fan speed to MED, press switch for MED setting. Refer figure 5.
5
6. To increase the fan speed to HIGH, press switch for HIGH
setting. Refer figure 6.
6
7. To turn the burner to LOW setting, press switch for LOW setting. Refer figure 7.
On low burner setting it is more efficient to operate the fan
speed on LOW.
8. If the burner fails to ignite, wait 20 seconds and repeat the
ignition procedure. See below.
To turn burner OFF To turn burner ON
7
User instructions continued
Cleaning.
All cleaning should be carried out when the heater is cold. Normally the heater should only need wiping with a lint - free damp
cloth. Any stubborn stains can be removed with a non-abrasive
spray on cleaner. If an abrasive cleaner is used the paint finish will
be damaged.
Internally the heater should only be cleaned by a licensed service
person listed in this manual.
If your heater requires attention contact your supplier or licensed
service person listed in this manual.
Important:
The appliance should be inspected before use and at least annually by an authorised service person. More frequent cleaning may
be required due to excessive lint build-up from carpeting, bedding
materials, pet hair, etc.
It is imperative that control compartments, burners and circulating
air passage ways of the appliance be kept clean.
Do not use this fire if the glass is cracked or with the glass safety
screen removed.
8
Loading...