Cannon 1907020, 1907023, 1907021, 1907002, 1907001 User Manual
...
ROD HOLDER & DOWNRIGGER
TROLLING SYSTEM
Adjustable Dual Axis Rod Holder Shown
Rod Holders:
ANGLED FIXED MOUNT
Adjustable Single Axis
Adjustable Rail Mount
Adjustable Clamp Mount
Adjustable Dual Axis
Adjustable Downrigger Mount
(METALLIC)
Adjustable Downrigger Mount
CAUTION:
READ THIS MANUAL CAREFULLY
BEFORE OPERATING YOUR
NEW CANNON ACCESSORY.
RETAIN FOR FUTURE REFERENCE.
NOTE: Do not return your CANNON accessory to your
retailer. Your retailer is not authorized to repair or replace this unit. You may obtain service by:
• calling CANNON at 1-800-227-6433;
• returning your accessory to the Factory Service Center;
121 Power Drive, Mankato, MN 56001
Please include proof of purchase and purchase date for
warranty service with any of the above options.
1907000
1907001
1907020
1907021
1907002
1907022
1907023
(BlACK)
Owner’s Manual
Rod Holder Models & Features
1907000 Angled – Fixed Mount Rod Holder
The Angled - Fixed Mount Rod Holder is 10 inches in length and has a fixed 60°
angle. Adjustments can be made side to side by forty five degrees using the adjustable
thumb screws in conjunction with an aluminum track. Clear anodized aluminum is used
for strength and corrosion resistance and a UV resistant cap protects the finish of the rod
and reel. The Angled Rod Holder is compatible with Cannon track systems.
1907001 Adjustable – Single Axis Rod Holder
1907020 Adjustable – Rail Mount Rod Holder
1907021 Adjustable – Clamp Mount Rod Holder
The Adjustable – Single Axis Rod Holder is 10 inches in length and has 6 locking
positions up and down. Pistol grip release provides quick one hand up and down angle adjustment while the ratcheting adjustment system allows you to pull the rod holder straight up for
rod removal. Adjustments can be made side to side by forty five degrees using the adjustable
thumb screws in conjunction with an aluminum track. Clear anodized aluminum is used for
strength and corrosion resistance and a UV resistant cap protects the finish of the rod and
reel. The Adjustable Rod Holder is compatible with Cannon, Bert’s, and Traxstech track systems.
Also available pre assembled to 1 1/4 inch rail mount and Clamp Mount.
1907002 Adjustable – Dual Axis Rod Holder
The Adjustable – Dual Axis Rod Holder is 10 inches in length and has 6 locking positions up and down with 360
hand up and down angle adjustment with 360
°
rotation. Pistol grip release provides quick one
°
rotation with the push of the release
button. Ratcheting adjustment system allows you to pull the rod holder straight up
for rod removal. Clear anodized aluminum is used for strength and corrosion resistance and a UV resistant cap protects the finish of the rod and reel. This Adjustable Rod Holder is compatible with Cannon, Bert’s, and Traxstech track systems.
2
Loading...