Cannon 1907020, 1907023, 1907021, 1907002, 1907001 User Manual

ROD HOLDER & DOWNRIGGER

TROLLING SYSTEM

Adjustable Dual Axis Rod Holder Shown

Rod Holders:

ANGLED FIXED MOUNT

Adjustable Single Axis

Adjustable Rail Mount

Adjustable Clamp Mount

Adjustable Dual Axis

Adjustable Downrigger Mount

(METALLIC)

Adjustable Downrigger Mount

CAUTION:
READ THIS MANUAL CAREFULLY
BEFORE OPERATING YOUR
NEW CANNON ACCESSORY.
RETAIN FOR FUTURE REFERENCE.

NOTE: Do not return your CANNON accessory to your
retailer. Your retailer is not authorized to repair or re­place this unit. You may obtain service by:

• calling CANNON at 1-800-227-6433;

• returning your accessory to the Factory Service Center;

121 Power Drive, Mankato, MN 56001

Please include proof of purchase and purchase date for
warranty service with any of the above options.

1907000
1907001
1907020
1907021
1907002
1907022

1907023

(BlACK)

Owner’s Manual

Rod Holder Models & Features

1907000 Angled – Fixed Mount Rod Holder

The Angled - Fixed Mount Rod Holder is 10 inches in length and has a fixed 60°
angle. Adjustments can be made side to side by forty five degrees using the adjustable
thumb screws in conjunction with an aluminum track. Clear anodized aluminum is used
for strength and corrosion resistance and a UV resistant cap protects the finish of the rod
and reel. The Angled Rod Holder is compatible with Cannon track systems.

1907001 Adjustable – Single Axis Rod Holder
1907020 Adjustable – Rail Mount Rod Holder
1907021 Adjustable – Clamp Mount Rod Holder

The Adjustable – Single Axis Rod Holder is 10 inches in length and has 6 locking
positions up and down. Pistol grip release provides quick one hand up and down angle adjust­ment while the ratcheting adjustment system allows you to pull the rod holder straight up for
rod removal. Adjustments can be made side to side by forty five degrees using the adjustable
thumb screws in conjunction with an aluminum track. Clear anodized aluminum is used for
strength and corrosion resistance and a UV resistant cap protects the finish of the rod and
reel. The Adjustable Rod Holder is compatible with Cannon, Bert’s, and Traxstech track sys­tems.

Also available pre assembled to 1 1/4 inch rail mount and Clamp Mount.

1907002 Adjustable – Dual Axis Rod Holder

The Adjustable – Dual Axis Rod Holder is 10 inches in length and has 6 lock­ing positions up and down with 360
hand up and down angle adjustment with 360

°

rotation. Pistol grip release provides quick one

°

rotation with the push of the release
button. Ratcheting adjustment system allows you to pull the rod holder straight up
for rod removal. Clear anodized aluminum is used for strength and corrosion resis­tance and a UV resistant cap protects the finish of the rod and reel. This Adjust­able Rod Holder is compatible with Cannon, Bert’s, and Traxstech track systems.

2

1907022 Adjustable – Downrigger Mount Rod Holder - Metallic
1907023 Adjustable – Downrigger Mount Rod Holder - Black

The Adjustable – Dual Axis Rod Holder is also available on a Cannon
downrigger mount in a metallic or black finish (metallic finish shown right).

1904015 Rail Mount 3/4” to 1-1/4”
1904016 Rail Mount 1-1/4” to 2”

Cannon Rail Mounts allow for the mounting of Cannon Single and Dual
Axis Rod Holders to round or square rail. Two sizes are available for round and
square tube styles. Components are made from clear anodized aluminum and
stainless steel for strength and corrosion resistance.

1904020 Clamp Mount

Cannon Rail Mounts allow for the mounting of Cannon single and
dual axis rod holders to any transom or allowable clamping edge.
Clamp opens to two and a half inches and is made from clear anodized
aluminum and stainless steel for strength and corrosion resistance.

1904000 Deck Mount

The Cannon Deck Mount plate is a four inch by three inch clear
anodized aluminum plate which allows the hard mounting of Cannon Dual
Axis Rod Holders. The plate comes with a black protective mounting boot
and all mounting hardware.

3

1904025 Aluminum Mounting Track 6”
1904026 Aluminum Mounting Track 12”
1904027 Aluminum Mounting Track 18”
1904028 Aluminum Mounting Track 24”
1904029 Aluminum Mounting Track 36”

Cannon tracks allow for flexible mounting positions and easy
removal of Cannon’s track system accessories. Locking grooves allow
thumb screws to index with track and prevent accessories from twisting.
The system is compatible with Cannon, Bert’s, and Traxtech track sys­tem products. Components are made from clear anodized aluminum
and stainless steel for strength and corrosion resistance. All mounting
hardware included. Available in 6, 12, 18, 24, and 36 inch lengths.

1904005 Pedestal Mount Track 12”
1904006 Pedestal Mount Track 18”

The pedestal mounting track is three inches high and allows for
mounting of Cannon’s track system accessories. Pedestal can be sur­face mounted or slid into mounting track for a variety of mounting posi­tions and easy removal. The system is compatible with Cannon, Bert’s,
and Traxtech track system products. Components are made from clear
anodized aluminum and stainless steel for strength and corrosion resis­tance. Mounting hardware is included. Pedestal is available in twelve
and eighteen inch track lengths for mounting up to three track system rod holders.

1904010 Gimbal Mount Track – Side Gunnel
1904011 Gimbal Mount Track – Stern

Cannon’s Gimbal Mount Track allow for mounting of Cannon’s
track system accessories in flush mount rod holders. Thirty degree an­gled gimbals have twelve inch tube length with an outer diameter of 1-1/2
inches. Eighteen inches of track allow for mounting up to three track
system rod holders. The system is compatible with Cannon, Bert’s, and
Traxtech track system products. Components are made from clear ano­dized aluminum and stainless steel for strength and corrosion resistance.

1904030 Fixed Base Downrigger Pedestal 4”
1904031 Fixed Base Downrigger Pedestal 6”

Cannon’s fixed base downrigger pedestals
can be surface mounted or track mounted for a vari­ety of mounting positions and easy removal. The
3/4” thick aluminum top plate is pre-drilled and
tapped for mounting Cannon downriggers as well as
most Scotty®, Big Jon®, Penn®, Vector, Proos,
Fishlander and Walker downriggers. Components are made from clear ano­dized aluminum and stainless steel for strength and corrosion resistance. The
fixed base downrigger pedestals are compatible with Cannon, Bert’s, and
Traxstech track systems. Available in 4” and 6” heights.

CAUTION:
The Cannon Pedestal
Mount is intended for
use with a Track that is
mounted directly to the
deck of the boat ONLY

.

4

1904032 Swivel Base Downrigger Pedestal 4”
1904033 Swivel Base Downrigger Pedestal 6”

Cannon’s swivel base downrigger pedestals can be surface
mounted or track mounted for a variety of mounting positions and easy re­moval. With 16 locking points, these downrigger pedestals allow for 360°
downrigger rotation with locking points every 22.5°. The 3/4” thick aluminum
top plate is pre-drilled and tapped for mounting Cannon downriggers as well
as most Scotty®, Big Jon®, Penn®, Vector, Proos, Fishlander and Walker
downriggers. Bearing system ensures smooth swivel action even while a
downrigger weight is attached. Components are made from clear anodized
aluminum and stainless steel for strength and corrosion resistance. The
swivel base downrigger pedestals are compatible with Cannon, Bert’s, and
Traxstech track systems. Available in 4” and 6” heights.

Rod Holder \ Accessory Compatibility

Rod Ho lde r

Mounts

Angled Fixed Mount

Adjus table Sing le Axis

Adjustable Dual Axis

Track Mount Gimbal Track Mount Pedestal Track Mount

●●●○○○

●●●

●●●●

- Compatible ○ - Not Compat ible * - Compatible with removal of track mount plate

●

Rail Mount Clamp Mo unt Deck M ount

*

●

*

*

●

*

●

○

●

Pedestal Mount \ Accessory Compatibility

Pede stal

Mounts

4" Fixed Mount

6" Fixed Mount

4" Swive l Mount

6" Swive l Mount

Track Mount Gimbal Track Mount Pedestal Track Mount

●○○○○●

●○○

●○○○○●

●○○

- Compatible ○ - Not Compatible

●

Part Part Number Description USED ON

Replacement Parts

Rail Mount Clam p Mo unt Deck Mount

○○●

○○●

3396562 END CAP

3390210 VINYL CAP 1907000

3393413 THUMB SCREW 1907000, 1907001, 1907002, 1904005, 1904006

3391515 CAP ROD HOLDER

33986110 WEA R TIP

1904005, 1904006, 1904010, 1904018, 1904025,
1904026, 1904027, 1904028, 1904029

1907001, 1907002, 1907020, 1907021, 1907022,
1907023

1907001, 1907002, 1907020, 1907021, 1907022,
1907023

5

CANNON® LIMITED WARRANTY

Johnson Outdoors Inc. warrants to the original purchaser that the accompanying product (see exclusions below) is free from
defects in material or workmanship for a period of one (1) year from the date of purchase. Within the warranty period, Johnson
Outdoors Inc. will, at its option, either repair or replace same without charge (but no cash refunds will be made). The unit must be
returned, prepaid and with proof of the date of purchase to the following:

● Johnson Outdoors, Inc Cannon Division, 121 Power Drive, Mankato, MN 56001

This limited warranty may be enforced only by the original purchaser; all subsequent purchasers acquire the product "as is" with­out any benefit of this limited warranty. Repair or replacement of the product as set forth in this limited warranty shall be the origi­nal purchaser’s sole and exclusive remedy and Johnson Outdoors Inc.’s sole and exclusive liability for breach of this warranty.

EXCLUSIONS

This warranty does not apply in the following circumstances:

• When the product has been connected, installed, combined, altered, adjusted, serviced, repaired, or handled in a manner
other than according to the instructions furnished with the product

• When a serial number has been defaced, altered, or removed

• When any defect, problem, loss, or damage has resulted from any accident, misuse, negligence, carelessness, or abnormal

use, or from any failure to provide reasonable and necessary maintenance in accordance with the instructions of the owner's
manual

LIMITATION AND EXCLUSION OF IMPLIED WARRANTIES AND CERTAIN DAMAGES

THERE ARE NO EXPRESS WARRANTIES OTHER THAN THESE LIMITED WARRANTIES. JOHNSON OUTDOORS INC.
DISCLAIMS LIABILITY FOR INCIDENTAL AND CONSEQUENTIAL DAMAGES, AND IN NO EVENT SHALL ANY IMPLIED WAR­RANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE, EX­TEND BEYOND ONE YEAR FROM THE DATE OF PURCHASE. THIS WRITING CONSTITUTES THE ENTIRE AGREEMENT
OF THE PARTIES WITH RESPECT TO THE SUBJECT MATTER HEREOF; NO WAIVER OR AMENDMENT SHALL BE VALID
UNLESS IN WRITING SIGNED BY JOHNSON OUTDOORS INC.

Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of consequential dam­ages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also
have other rights that vary from state to state.

Johnson Outdoors, Inc. / Cannon Division

121 Power Drive, Mankato, MN 56001

© 2008 Johnson Outdoors, Inc. All rights reserved.

To download product manuals or purchase Cannon products from an authorized dealer, please visit our web page at www.cannondownriggers.com

WARNING: This product contains chemical(s) known to the state of California to cause cancer and/or reproductive toxicity.

Product protected by United States Patent number des. D573685, D573686, D574920

Form No. 3397120 Rev D

1-800-227-6433

6