Cannice Technology AS L Users manual

Bluetooth Earphone
AS INSTRUCTION
Start here
Following items are included
1
USB cable
Ear cushions
Product overview
1. Charge jack
2. Multifunction button
3. Talking mic
4. Battery
& Status indicator
2
Charging
Your new earphone has enough power to pair and make a few
calls. It takes 2 hours to fully charge the earphone; while charging,
the battery indicator light is red, the indicator light flashes blue
once charging is complete.
Note: The lifetime of the battery will be significantly reduced if
your earphone is left uncharged for a long period. We recommend
that you recharge your earphone at least once a month.
1
2
3
4
3
4
Use
Power on
Press and hold Multifunction button for about 3 seconds in off state.
The earphone says "power on" and the LED stays blue 2 senconds.
Power off
Press and hold Multifunction button for about 5 seconds in open state.
The earphone says "power off" and the LED stays red 2 senconds.
Tip s: When t he dist ance be tween t he earp hone an d phone i s beyon d
eff ectiv e range , earph one dis conne cts wit h phone . Earph one wil l power
off a utoma tical ly once n o activ e for 5 min utes.
Charging
Stays on red while charging. Stays on blue after fully charged.
Answer a call
Press the multifunction button once.
Reject a call
Press and hold the Multifunction button for about 2 seconds.
End a call
Press the Multifunction button once.
Windows Phone 8
a. On yo ur phon e, open t he Sett ings me nu.
b. Sel ect Blu etoot h. If Blu etoot h is off, t urn it on .
The P hone wi ll sear ch for ne w devic es auto matic ally.
ON
Bluetooth
AS
Sear ch
Music
(Need media player support).
Music play / pause
Press Multifunction button once to play / pause music. (Some
phones may require you to start a media player first) .
Volume up / down
In streaming mode or calling mode double press the multifunction
button ,the volume change from small to large step by step ,
from large to small all at once.
Track forward
Press and hold the multifunction button for 2 seconds in streaming state.
Switch Music and Call
When a call rings during a music playing, the music automatically
pauses to allow you to answer or ignore the call. Once the call is
ignored or ends, the music is resumed.
5
Pairing
Pair one phone
Not e: When t he earp hone an d phone h ave bee n paire d once,
the y will au tomat icall y conne ct when t he earp hone is o n and
Blu etoot h is acti vated o n the pho ne.
1.A fter po wer on L/ R earph ones re -conn eted au tomat icall y,
tha n the L ear phone s enter p airin g mode.
2.A ctiva te Blue tooth o n your ph one (Se e below f or more d etail s).
iPhone
a.On your phone, open the Settings menu.
The iPhone will search for new devices automatically.
Android phone
a.On your phone, open the Settings menu.
b.Select Bluetooth (For old Android phone, Bluetooth is found in the
Wireless & Networks). If Bluetooth is off, turn it on. Select Search for
Devices if your phone does not automatically search for new devices.
910
Basic operation
Status indicator
Instruction
Power on
Power off
Standby
Pairing
Incoming call
Battery low
LED status
Stay blue about two second
Stay red about two second
Stays on blue
Flashes red and blue alternately
Flashes blue quickly
Blue LED turn to Red
Hard reset
If the earphone cannot be turned on even when fully charged or does
not respond during use, follow the instructions below to reset it.
1.While pressing and holding the multifunction button, connect the
earphone to your PC's USB port or a USB power adapter with the
charging cable.
2.Keep pressing and holding the Multifunction button until the
earphone turns on. The earphone is now reset.
6
Safety and care
Using earphone at high to moderate volumes for extended periods
of time will result in permanent hearing damage .It is advised you
keep volume levels moderate to low at all times for your safety.
Do not use while driving a car, cycling, operating machinery, or
performing other activities that require hearing surrounding sounds.
Do not use earphone in thunderstorm weather, the earphone may
not work properly in the condition, and increase the risk of being hit
by lightning .
Earphone may not work properly under high temperature or high
humidity conditions.
Do not use any corrosive cleaner/oil to clean the earphone.
If the earphone comes in contact with liquids, quickly wipe away .If
submersed in water, do not turn the earphone on until completely dried.
Tips: liquid submersion voids the warranty.
Keep the earphone and packaging out of reach of children .
Voice prompts
Power on
Power off
/
Pairing
Rin g tone
low Battery,
please charge
3. Select "AS". If your phone asks, enter 0000 (four zeros) for the
Pass code or accept the connection. The LED indicator stops flashing
red and blue once successfully paired, you hear "connected".
Some phone list an option to "Play through earphone", select to use the
earphones.
ON
Bluetooth
AS
Sear ch
7
1112
8
Loading...