Canfield Technologies 31 Data Sheet

CANFIELD TECHNOLOGIES, LLC

Safety Data Sheet
According to 1907-2006/EC, Article 31

Product Trade Name: 100% Watersafe Lead Free Solid Wire Solder Alloy
Details of the supplier of the safety data sheet:

This Safety Data Sheet has been updated in accordance with the Globally Harmonized System (GHS).

Manufacturer Name: Canfield Technologies/BOW Electronic Solders
Address:

1 Crossman Road, Sayreville, NJ 08872

General Phone Number: 732-316-2100
INFOTRAC 24 Hour Emergency Telephone Number: 1-800-535-5053
SDS Creation Date 6-Jan-15
SDS Revision Date: 1-Mar-20

Classification of the substance or mixture

Classification according to Regulation (EC) NO 1272/2008

GHS08 Health Hazard

Resp. Sens. 1 H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.

GHS07

Skin Sens. 1B H317 May cause an allergic skin reaction.

Label elements
Labeling according to Regulation (EC) No 1272/2008

The product is classified and labeled according to the CLP regulation.
Hazard pictograms

GHS08
Signal word Danger
Hazard Statements

H334

May cause allergy or asthma symptoms or breathing difficulties if inhaled.

H317

May cause an allergic skin reaction.

Precautionary statements

P285 In case of inadequate ventilation wear respiratory protection.

P280

Wear protective gloves/protective clothing/eye protection/face protection.

P301+P312 IF SWALLOWED: Call a POISON CENTER or doctor or physician if you feel unwell.
P304+P340 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P302+P350 IF ON SKIN: Gently wash with plenty of soap and water.
P501 Dispose of contents/container in according with local/regional/national regulations.
Hazard description:
WHMIS Hazard Symbols

D2B- Toxic material causing other toxic effects.

1. PRODUCT AND COMPANY IDENTIFICATION

2. HAZARDS IDENTIFICATION

Classification system:

NFPA ratings (scale 0-4 )

Health = 1
Fire =0
Reactivity = 0

Health = 1
Fire = 0
Reactivity=0

Other hazards
Results of PBT and vPvB assessment

PBT : Not applicable
vPvB: Not applicable

Chemical characterization : Mixtures

Description: Mixtures of the substances listed below with nonhazardous additions.

CAS No. Description % Range

CAS: 7440-31-5

Tin

Remainder

EINECS:231-141-8
CAS: 7440-50-8 Copper 3.5-4.5%
EINECS:231-159-6
CAS: 7440-36-0 Antimony 1.0-1.5%
EINECS: 231-146-5
CAS: 7440-22-4 Silver 0.2 -.5%
EINECS: 231-131-3

Additional information:

This solder product does not contain any Substance of Very High Concern (SVHC) on the European Chemicals Agency
(ECHA) Candidate list.

Description of first aid measures

After inhalation: Supply fresh air, consult doctor in case of complaints.

After skin contact: Immediately wash with water and soap and rinse thoroughly.

After eye contact: Rinse opened eye for several minutes under running water.

After swallowing: Seek immediate medical advise.

Information for doctor:

Most important symptoms and effects, both acute and delayed.
Indication of any immediate medical attention and special treatment needed.

Extinguishing media

Suitable extinguishing agents: CO2, sand, extinguishing powder. Do not use water.

Special hazards arising from the substance or mixture

In case of fire, the following can be released:
Carbon monoxide (CO)
Carbon dioxide (CO2)

Advise for fire fighters

Protective equipment: Wear self-contained respiratory protective device.

Personal precautions, protective equipment and emergency procedures: Ensure adequate ventilation

Environmental precautions: Do not allow to enter sewers/ surface or ground water.

Methods and material for containment and clearing up:

Dispose contaminated material as waste in accordance to item 13.
Ensure adequate ventilation.

Reference to other sections

See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.

4. FIRST AID MEASURES

5. FIREFIGHTER MEASURES

3. COMPOSITION OF MIXTURE

6. ACCIDENTAL RELEASE MEASURES