Candy RO16105DWHC7, RO16105DWHC7G, RO16106DWHC7, RO16106DWHC7G, RO1695DWHC7 Instruction manual

...
EN
washing machine. We are confident it will loyally assist you in safely washing your clothes,
Carefully read this manual for correct and safe appliance use and for helpful tips on
Only use the washing machine after carefully reading these instructions. We recommend you always keep this manual on
for any future
Please check that the appliance is delivered with this instruction manual, warranty certificate, service centre address and energy efficiency label. Also check that plugs, drain hose support hook and liquid
(only on some
models) are included. We recommend you
character code, also called the “serial
e found inside the door opening. This code is a unique code for your product that you will need to register the product warranty, or if you need to contact the Customer Service
This appliance is marked according to the European directive 2012/19/EU on Waste Electrical and Electronic
WEEE contains both polluting substances (which can cause negative consequences for the environment) and basic components (which can
used). It is important to have WEEE
subjected to specific treatments, in order to
utants, and recover and recycle all materials. Individuals can play an important role in ensuring that WEEE does not become an environmental issue; it is
WEEE should not be treated as household
WEEE should be handed over to the relevant collection points managed by the municipality or by registered companies. In many countries, for
In many countries, when you buy a new
eturned to the
retailer who has to collect it free of charge on a
one basis, as long as the equipment is of
equivalent type and has the same functions as
Thank-you for choosing a Candy
even delicates, day after day.
Environmental conditions
efficient maintenance.
hand and in good condition owners.
detergent or bleach tray
keep all these components.
FOR U.K. ONLY On receipt of your appliance please check it carefully for damage. Any damage found must be reported to the
delivery driver immediately. Alternatively damage found must be reported to the retailer within 2 days of receipt.
Each product is identified by a unique 16-
number”, printed on the sticker. This can b
Centre.
!
Equipment (WEEE).
be re-
remove and dispose properly all poll
essential to follow some basic rules:
!
waste;
!
large WEEE, home collection could be present.
appliance, the old one may be r
one-to-
the supplied equipment.
Contents
1. GENERAL SAFETY RULES
2. INSTALLATION
3. DETERGENT DRAWER
4. PRACTICAL HINTS
5. CLEANING AND MAINTENANCE
6. REMOTE CONTROL (WI-FI)
7. QUICK USER GUIDE
8. CONTROLS AND PROGRAMS
9.
TROUBLESHOOTING AND WARRANTY
2
1. GENERAL SAFETY RULES
This appliance is intended to
!
be used in household and similar applications such as:
- Staff kitchen areas in shops, offices and other working environments;
- Farm houses;
- By clients in hotels, motels and other residential type environments;
- Bed and breakfast type environments.
A different use of this appliance from household environment or from typical housekeeping functions, as commercial use by expert or trained users, is excluded even in the above applications. If the appliance is used in a manner inconsistent with this it may reduce the life of the appliance and may void the manufacturer’s warranty. Any damage to the appliance or other damage or loss arising through use that is not consistent with domestic or household use (even if located in a domestic or household environment) shall not be accepted by the manufacturer to the fullest extent permitted by law.
!
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance
!
in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
!
Children should be supervised to ensure that they do not play with the appliance.
!
Children of less than 3 years should be kept away unless continuously supervised.
If the supply cord is damaged, it
!
must be replaced by a special cord or assembly available from the manufacturer or its service agent.
!
Only use the hose-sets supplied with the appliance for the water supply connection (do not reuse old hose-sets).
Water pressure must be between
!
0.05 MPa and 0.8 MPa. Make sure carpets or rugs do
!
not obstruct the base or any of the ventilation openings.
After installation, the appliance
!
must be positioned so that the plug is accessible.
!
The maximum load capacity of dry clothes depends on the model used (see control panel).
!
To consult the product technical specification please refer to the manufacturer website.
3
EN
Electrical connections and safety instructions
wash cycle.
!
The technical details (supply voltage and power input) are indicated on the product rating plate
Make sure that the electrical
!
system is earthed, complies with all applicable law and that the (electricity) socket is compatible with the plug of the appliance. Otherwise, seek qualified professional assistance.
The use of converters, multiple
!
sockets or extension cords is strongly advised against
!
Before cleaning or maintaining the washing machine, unplug the appliance and turn off the water tap.
!
Do not pull on the power cord or appliance to unplug the machine.
Make sure there is no water in
!
the drum before opening the door.
!
Do not expose the washing machine to rain, direct sunlight or other weather elements. Protect from possible freezing.
!
When moving, do not lift the washing machine by the knobs or detergent drawer; during transport, never rest the door on the trolley. We recommend two people lift the washing machine.
!
In the event of fault and/or malfunction, turn off the washing machine, close the water tap and do not tamper with the appliance. Immediately contact the Customer Service Centre and only use original spare parts. Failure to observe these instruction may jeopardise appliance safety.
WARNING:
water may reach very high temperatures during the
!
4
rubber bungs and plastic spacer
remove by tilting the product forward and recovering them from the floor or
Cover the open transportation screw
(according to the model, consider
2. INSTALLATION
Remove the 2 or 4 transportation
!
screws (A) on the back and remove the 2 or 4 flat washers,
tubes (B) as illustrated in figure 1. If the washing machine is built-in,
!
unscrew the 3 or 4 transportation screws (A) and remove the 3 or 4 flat washers, rubber bungs and plastic spacer tubes (B).
During the removal of the screws
!
occasionally spacer tubes fall inside the product, these can be
1
A
A
B
B
B
A
A
B
EN
inside the base of the machine.
!
holes with the 2 or 4 plastic caps included in the instruction bag.
WARNING:
keep packaging materials away from children.
Place the corrugated plastic sheet,
!
found on top of the appliance during the unpacking process, into the base of the appliance as shown in figure 2
version A, B or C).
In some models this operation will not be necessary, because the corrugated plastic sheet will be already placed on the bottom of the appliance.
2
A
1
2
B
C
3
2
3
1
5
!
Connect the water hose to the water
only using the hose
supplied with the appliance (do not
may include one or
water mains connection settings with hot
Connect the grey tube to the cold water
and the red one to the hot water
tap. The machine can be connected to
ome
a device located on the supply tube that stops water flow if the tube deteriorates; in this case, a red mark will appear in the
” and the tube must be
press the
SUPPLY TUBE WITH
Should water leak from the primary
", the transparent
will contain water to permit the washing cycle to complete. At the end of the cycle, contact the Customer Service Centre to replace the
Hydraulic connections
!
supply tap (fig. 3)
reuse old hose-sets).
SOME MODELS
!
more of the following features:
HOT&COLD (fig. 4):
!
and cold water for higher energy savings.
tap
the cold water tap only: in this case, s programs may start a few minutes later.
AQUASTOP (fig. 5):
!
window “A replaced. To unscrew the nut, one-way lock device "B".
!
AQUAPROTECT – GUARD (fig. 6):
internal tube "A containment sheath "B"
3
4
1
5
B
A
6
B
supply tube.
!
!
A
6
min 50 cm max 85 cm
+2,6 mt
max
max 100 cm
min 4 cm
A
B
C
8
Setting
!
The washing machine should be installed in its final position such that the water fill hose is not kinked or trapped. The corrugated drain hose should be inserted into suitable drain pipe of between 50 cm and 85 cm height above the floor using the curved drain hose support. If an under sink connection is used the drain hose must be routed above the sink overfill opening to prevent back siphoning. Care must be taken to avoid kinking or trapping the drain hose (fig. 7).
!
Level the appliance using the feet as illustrated in figure 8:
a. turn the nut clockwise to release the
screw;
b. rotate the foot to raise or lower it until it
touches to the floor;
c. lock the foot, screwing in the nut, until it
tightens against to the bottom of the washing machine.
!
Plug in the appliance.
WARNING:
contact the Customer Service Centre should the power cord need replacement.
Installation faults are not covered by the manufacturers warranty.
7
EN
!
7
3. DETERGENT DRAWER
The detergent draw is split into 3 compartments as illustrated in figure 9:
compartment "1": for prewash detergent;
!
compartment “ : for special additives,
!
softeners, starch fragrances, etc.;
WARNING:
only use liquid products; the washing machine is set to automatically dose additives at each cycle during the last rinse.
!
compartment "2": for washing detergent.
A liquid detergent cup is also included IN SOME MODELS (fig. 10). To use it, place it
in compartment "2". This way, liquid detergent will only enter the drum at the right time. The cup can also be used for bleach when the “Rinse” program is selected.
WARNING:
some detergents are not designed for use in the dispenser drawer but are supplied with their own dispenser that is placed in the drum directly.
9
1
2
10
SOME MODELS are provided with the automatic dosage, this carries out a precise measurement of detergent and softener. specific section in the CONTROLS AND PROGRAMS chapter for details.
In this case, refer to the
8
!
4. PRACTICAL HINTS
Load tips
When sorting laundry, make sure:
- have eliminated metallic objects such as hair clips, pins, coins, from laundry;
- to have buttoned pillow cases, closed zips, tied loose belts and long robe ribbons;
- to have removed rollers, hooks or clips from curtains;
- to have carefully read clothing washing labels;
- to have removed any persistent stains using specific detergents.
When washing rugs, bedcovers or other
!
heavy clothing, we recommend you avoid the spinning cycle.
To wash wool, make sure the item can be
!
machine washed. Check the fabric label.
Helpful suggestions for the user
A guide environmentally friendly and economic use of your appliance.
Maximise The Load Size
Achieve the best use of energy, water,
!
detergent and time by using the recommended maximum load size. Save up to 50% energy by washing a full load instead of 2 half loads.
Do you need to pre-wash?
For heavily soiled laundry only!
!
SAVE detergent, time, water and between 5 to 15% energy consumption by NOT selecting Prewash for slight to normally soiled laundry.
Is a hot wash required?
! Pretreat stains with stain remover or soak
!
dried in stains in water before washing to
reduce the necessity of a hot wash programme. Save energy by using a low temperature wash programme.
Before using a drying programme (WASHER-DRYERS)
SAVE energy and time by selecting a
!
high spin speed to reduce the water content in laundry before using a drying programme.
Following is a quick guide with tips and recommendations on detergent use at the various temperatures. In any case, always read the instructions on the detergent for correct use and doses.
When washing heavily soiled whites, we recommend using cotton programs of 60°C or above and a
normal washing powder (heavy duty) that contains bleaching agents that at medium/high temperatures provide excellent results.
For washes between 40°C and 60°C the type of detergent used needs to be appropriate for the type of fabric and level of soiling. Normal powders are suitable for “white” or colour fast fabrics with high soiling, while liquid detergents or “colour protecting” powders are suitable for coloured fabrics with light levels of soiling.
For washing at temperatures below 40°C we recommend the use of liquid
detergents or detergents specifically labeled as suitable for low temperature washing.
For washing wool or silk, only use detergents specifically formulated for these fabrics.
9
EN
5. CLEANING AND MAINTENANCE
To clean the washing machine exterior, use a damp cloth, avoiding abrasives, alcohol and/or solvents. To maintain a good wash performance we recommend that the soap drawer and pump filters are regularly cleaned. A monthly service wash, using a proprietary cleaner is also recommended.
Drawer cleaning
We recommend you clean the drawer to avoid
!
accumulating detergent and additive residue.
!
To do this, extract the drawer using slight force, clean it with running water and reinsert it in its housing.
!
Ensure the siphon cap is correctly refitted.
Filter cleaning
The washing machine comes with a
!
special filter able to trap large residue, such as buttons or coins, which could clog the drain (according to the model, consider version A or B).
!
ONLY AVAILABLE ON CERTAIN MODELS: pull out the corrugated hose, remove the stopper and drain the water into a container.
!
Ensure all the water has been emptied from the drum.
Before unscrewing the filter, we
!
recommend you place an absorbent cloth under it to keep the floor dry. A small amount of water will come out of the filter as you remove it - this is normal.
Turn the filter counter-clockwise to the
!
limit stop.
!
Remove and clean the filter; when finished, replace it turning it clockwise. The filter handle will be locked when it is not possible to turn any further and the handle is horizontal. Smearing a small amount of liquid soap on the filter seal will help refitting.
Repeat the previous steps in reverse
!
order to reassemble all parts.
A
B
Suggestions for moves or prolonged disuse
Should the washing machine be stored in
!
an unheated room for a long period of time, drain all water from tubes.
Unplug the washing machine.
! !
Detach the tube from the drainage system and clip on the rear of the machine and lower it, fully draining water into a bowl.
! Secure the drain tube with the drainage
system and clip on the rear of the machine when finished.
Keep the door glass and gasket clean.
!
The manufacturers warranty only covers faults within the product of a mechanical or electrical nature. Faults caused by handling, installation or miss use are not covered and may incur a charge for any repair visit to resolve.
!
10
instructions on the device display or the
mode while
SMART
REMOTE
. The control panel on the appliance will be operative once again, and if the cycle is paused, you will
DOOR
With the door closed, turn the knob to the
position to
control the appliance using the app once
way, it will
6. REMOTE CONTROL (WI-FI)
This appliance is equipped with Wi-Fi technology that allows you to control it remotely via App.
MACHINE ENROLLMENT (ON APP)
!
Download the Candy simply-Fi App on your device.
The Candy simply-Fi App is available for devices running both Android and iOS, both for tablets and for smartphones.
Get all the details of the Wi-Fi functions by browsing the App in DEMO mode.
!
Open the App, create the user profile (or log-in if it is already created previously) and enroll the appliance following the
"Quick Guide" attached on the machine.
TO ENABLE REMOTE CONTROL
Check that the router is switched on and
!
connected to the Internet.
! Load the laundry, close the door, add the
detergent if it’s necessary.
!
Turn the SMART RING (programme
selection ring) to the REMOTE CONTROL (Wi-Fi) position: the door will lock and the
controls on the control panel will be disabled.
!
Start the cycle using the Candy simply-Fi app. When the cycle has been completed, turn off the machine by turning the SMART RING to the OFF position to unlock the door.
*
*
REMOTE CONTROL (Wi-Fi)
TO DISABLE REMOTE CONTROL
!
To exit REMOTE CONTROL a cycle is underway, turn the
RING to any position other than CONTROL (Wi-Fi)
be able to open the door once the
LOCKED indicator light switches off.
For safety reasons, in some wash cycle phases, the door can be opened only if the level of the water is below its lower edge and if the temperature is less than 45°C. If these conditions are met, wait for the DOOR LOCKED light to switch off before opening the door.
!
REMOTE CONTROL (Wi-Fi)
again. If there is a cycle under continue.
OFF
EN
11
!
select the washing programme
7. QUICK USER GUIDE
This appliance automatically adjusts the level of the water to the type and quantity of washing. This system gives a reduction in energy consumption and a saving in washing times.
Program selection
Turn on the appliance and select the
!
required program.
!
Adjust the washing settings if necessary and select the required options.
DRYING (WASHER-DRYERS only) If you would like the drying cycle to begin automatically after washing,
required and select the drying cycle. Or you can finish the wash and then select the drying programme.
!
Press the START (PLAY)/PAUSE button to start the program.
!
At the end of the program, the message "END" will appear on the display (on some models, all wash stage indicators lights will turn on).
Turn off the appliance.
!
For any type of wash, see the program table and follow the operating sequence as indicated.
Technical data
Water pressure:
min 0.05 Mpa / max 0.8 Mpa (0.05 MPa dispenses approximately 1 litre of water in 10 seconds)
Spin r.p.m.: See rating plate.
Power input / Power current fuse amp / Supply voltage: See rating plate.
8. CONTROLS AND PROGRAMS
1000
90°
60°
30°
Pre
800
600
400
Kg Detector
A
I
1000
90°
60°
800
600
400
30°
Kg Detector
HGF
Pre
EDCB
A SMART RING (programme
selection ring) B PLAY/PAUSE button C DELAY START button D OPTIONS button E STAIN LEVEL/ALTERNATIVE
PROGRAMME SELECTION button F TEMPERATURE SELECTION
button G SPIN SELECTION button H STEAM button
F+G CHILD LOCK
I Digital display
OFF
°
°
°
°
°
°
°
°
°
°
!
!
12
WARNING:
Don’t touch the buttons while inserting the plug because the machines calibrates the systems during the first seconds: touching the buttons, the machine couldn’t work property. In this case, remove the plug and repeat the operation.
SMART RING (ring for selecting programmes)
When the SMART RING is turned, the
!
appliance will be turned on and the display will show the description and parameters of the selected programme.
!
At the end of the cycle, remember to switch off the appliance by turning the SMART RING to the OFF position, then unplug the appliance and turn off the water supply.
First starting
- Language setting
After connecting the machine to the
!
network and turning it on, press the STEAM or DELAY START display the available languages.
!
Select the desired language pressing the
PLAY/PAUSE button.
- Change the language
If you want to change the setting language you will have to press simultaneously STEAM and DELAY START buttons for about 3 seconds. ENGLISH will appear on the display, and you will be able to choose a new language.
button to
PLAY/PAUSE button
Close the porthole BEFORE pressing the PLAY/PAUSE button.
!
To start the selected cycle with the preset
!
parameters, press PLAY/PAUSE. When the programme is running, the display will show the time to elapse.
!
Moreover, If you want to modify the chosen program, press the desired options buttons, modify the default parameters and then press PLAY/
PAUSE button to start the cycle.
Only the options compatible with the set programme can be selected.
After switching on the appliance, wait a
!
few seconds for the programme to start running.
PROGRAMME DURATION
!
When a programme is selected the display automatically shows the cycle duration, which can vary, depending on the options selected.
!
Once the programme has started you will be kept informed constantly of the time remaining to the end of the wash.
The appliance calculates the time to the
!
end of the selected programme based upon a standard loading, during the cycle, the appliance corrects the time to that applicable to the size and composition of the load.
PROGRAMME END
!
"END" will appear in the display at the end of the program and the DOOR LOCKED light will go off, it is now possible to open the door.
!
At the end of the cycle, turn off the washing machine by turning the SMART
RING to the OFF position.
The SMART RING must ALWAYS be put in the OFF position at the end of the washing cycle before you can select a new washing cycle.
13
EN
PAUSING THE MACHINE
Keep the PLAY/PAUSE button pressed
!
for about 2 seconds (some light indicators and the residual time display will flash, showing that the machine is paused).
For safety reasons, in some wash cycle phases, the door can be opened only if the level of the water is below its lower edge and if the temperature is less than 45°C. If these conditions are met, wait for the DOOR LOCKED light to switch off before opening the door.
!
Press the PLAY/PAUSE button again to re-start the programme from the point it had been paused at.
CANCELLING THE SET PROGRAMME
!
To cancel the programme, turn the SMART RING to the OFF position.
!
Wait until the DOOR LOCKED light has gone out before opening the door.
DELAY START button
!
This button allows you to pre-programme the wash cycle to delay the start of the cycle for up to 24 hours.
!
To delay the start use the following procedure:
- Select the required programme.
- Press the delay start button once to
activate it (h00 appears on the display) and then press it again to set a 1 hour delay (h01 appears on the display). The pre-set delay increases by 1 hour each time the button is pressed, until h24 appears on the display, at which point pressing the button again will reset the delay start to zero.
- Confirm by pressing the PLAY/PAUSE
button. The delay countdown will begin
and when it has finished the programme
will start automatically.
!
You can cancel the start delay by turning the SMART RING to the OFF position.
If there is any break in the power supply while the machine is operating, a special memory stores the selected programme and, when the power is restored, it continues where it left OFF.
The following options must be selected before pressing the PLAY/ PAUSE button.
OPTIONS button
This button allows you to choose between three different options:
- PREWASH
This option allows you to make a prewash
!
and it is particularly useful for heavily soiled loads (can be used only on some programmes as shown in the table of programmes).
!
We recommend you use only 20% of the recommended quantities shown on the detergent pack.
- EXTRA RINSE
This option allows you to add one rinse at
!
the end of the washing cycle and is useful for people with delicate and sensitive skin, for which a small amount of detergent residue can cause irritations or allergies.
!
It is advisable to also use this function for the children clothes and for the washing of heavily soiled items, which requires a lot of detergent to be used, or for the washing of toweling items whose fibres mostly have the tendency to hold the detergent.
14
!
- HYGIENE +
Activated when you set 60°C of temperature. This option allows deep cleaning of your clothes by maintaining the same temperature for the whole wash.
If an option is selected that is not compatible with the selected programme then the option indicator light first flashes and then goes off.
STAIN LEVEL/ALTERNATIVE PROGRAMME SELECTION button
This button can be used to select two different functions, depending on the selected programme:
- STAIN LEVEL button
!
Once the programme has been selected the wash time set for that programme will be automatically shown.
! This option allows you to choose between
3 levels of wash intensity modifying the length of the programme, depending on how much the fabrics are soiled (can
only be used on some programmes as shown in the table of programmes).
- ALTERNATIVE PROGRAMME SELECTION
Where shown in the table, this option permits selection of an alternative to the pre-set programme (in the case of the SAVING 14'-30'-44' programme, it allows you to choose one of the three available durations).
TEMPERATURE SELECTION button
!
This button allows you to change the temperature of the wash cycles.
It is not possible to raise the temperature
!
over the maximum allowed for the programme, in order to protect the fabrics.
If you want carry out a cold wash all the
!
indicators must be off.
SPIN SELECTION button
By pressing this button, it is possible to
!
reduce the maximum speed, and if you wish, the spin cycle can be cancelled.
If the label does not indicate specific
!
information, it is possible to use the maximum spin expected in the program.
To prevent damage to the fabrics, it is not possible to increase the speed over the maximum allowed for the programme.
To reactivate the spin cycle press the
!
button until you reach the spin speed you would like to set.
!
It is possible to modify the spin speed without pausing the machine.
An over dosing of detergent can cause excessive foaming. If the appliance detects the presence of excessive foam, it may exclude the spinning phase or extend the duration of the program and increase water consumption.
The machine is fitted with a special electronic device, which prevents the spin cycle should the load be unbalanced. This reduces the noise and vibration in the machine and so prolongs the life of your machine.
EN
15
!
STEAM button
This button allows a specific treatment to follow certain wash cycles (please refer to the program table). The steam function works by relaxing creases in wet garments and as a result reduces the time needed to iron these items. The fibres are regenerated and refreshed by removing bad smells. Every program provides a dedicated steam treatment in order to ensure the maximum cleaning efficiency according to the items fabric type and colour.
This option must be selected before pressing the PLAY/PAUSE button.
CHILD LOCK
!
Pressing simultaneously the buttons
TEMPERATURE SELECTION and SPIN SELECTION for about 3 seconds, the
machine allows you to lock the keys. In this way, you can avoid making accidental
or unwanted changes if a button on the display is pressed accidently during a cycle.
!
The key lock can be simply cancelled by pressing the two buttons simultaneously again or turning off the appliance.
Digital Display
The display’s indicator system allows you to be constantly informed about the status of the machine.
1
90°
60°
30°
1)
WASH TEMPERATURE INDICATOR LIGHTS
This show the washing temperature of the selected programme that can be changed (where allowed) by the relevant button.
3
495
2
1000
800
600
400
Kg Detector
6
7
Pre
8
If you want carry out a cold wash all the indicators must be off.
2) SPIN SPEED INDICATOR LIGHTS
This show the spin speed of the selected programme, you can reduce or omit by the relevant button.
3) DOOR LOCKED INDICATOR LIGHT
!
The indicator light is illuminated when the door is fully closed.
Close the door BEFORE selecting the PLAY/PAUSE button.
!
When PLAY/PAUSE is pressed on the machine with the door closed, the indicator will flash momentarily and then illuminate.
If the door is not properly closed, the light will continue to flash for about 7 seconds, after which the start command will be automatically delete. In this case, close the door in the proper way and press the PLAY/PAUSE button.
Wait until the DOOR LOCKED light has
!
gone out before opening the door.
4) Kg Detector (function active only on certain programmes)
!
During the first minutes of the cycle, the "Kg Detector" indicator remain on while the intelligent sensor will weigh the laundry and adjust the cycle time, water and electricity consumption accordingly.
Through every wash phase "Kg Detector"
!
allows to monitor information on the wash load in the drum and in the first minutes of the wash it:
- adjusts the amount of water required;
- determines the length of the wash cycle;
- controls rinsing according to the type of fabric selected to be washed it;
16
°
°
°
°
°
!
- adjusts the rhythm of drum rotation for the type of fabric being washed;
- recognizes the presence of lather, increasing, if necessary, the amount of water during rinsing;
- adjusts the spin speed according to the load, thus avoiding any imbalance.
5) KEY LOCK INDICATOR LIGHT
The indicator light show that the keys are locked.
6) OPTIONS INDICATOR LIGHTS
The indicator lights show the option that can be selected by the relevant button.
7) STAIN LEVEL INDICATORS LIGHTS
!
Once the programme has been selected, the indicator light will automatically show the stain level set for that programme.
!
Selecting a different stain level the relevant indicator will light up.
8) STEAM INDICATOR LIGHT
The indicator light shows the selection of the relevant option.
9) Wi-Fi INDICATOR LIGHT
On models equipped with Wi-Fi, it
!
indicates the status of the connection. It could be:
- FIXED ON: remote control enabled.
- SLOW FLASHING: remote control disabled.
- QUICK FLASHING FOR 3 SECONDS, THEN OFF: the machine cannot connect to the home Wi-Fi network or has not yet been enrolled on the App.
- SLOW BLINKING FOR 3 TIMES, THEN OFF FOR 2 SECONDS: reset of the Wi-Fi network (during enrollment on the App).
- ON FOR 1 SECOND, THEN OFF FOR 3 SECONDS: the door is open. Remote control cannot be activated.
!
For all the information about the functionality and the instructions for an easy configuration of the Wi-Fi, please refer to:
go.candy-group.com/simplyfi-dualble
EN
17
!
Table of programmes
PROGRAMME
3)
3)
DAILY 39'
MIXED &
COLOURED 59'
PERFECT
COTTON 59'
HYGIENE PLUS 59'
SPORT PLUS 29'
DELICATE 59'
SAVING
(MAX.)
(see control panel)
4)
2,5 3 3,5 4 4,5 5 5,5 6 6,5
4)
5 6 7 8 9 10 11 12 13
4)
2,5 3 3,5 4 4,5 5 5,5 6 6,5
1,5 2 2 2 2 2 2 2 2
1,5 2 2 2,5 2,5 2,5 3 3 3,5
4)
2 2 2,5 2,5 2,5 2,5 2,5 3 3
1 1 1 1,5 1,5 1,5 1,5 2 2
14'
1,5 2 2,5 2,5 2,5 2,5 2,5 3 3
30'
1)
*
1
2
(MAX.)
40°
40°
40°
60°
30°
40°
30°
30°
2
1
3 3 3,5 3,5 3,5 3,5 3,5 4 4
44'
3)
RINSE
- - - - - - - - -
40°
-
DRAIN & SPIN
WOOL/HAND WASH
SYNTHETIC AND
COLOURED
ECO 20°
COTTON**
WHITES
REMOTE CONTROL (Wi-Fi)
Position that you have to select when you want to enable remote control through the App (via Wi-Fi).
!
- - - - - - - - -
1 1 1 2 2 2 2 2,5 2,5
2)
2,5 3 3,5 4 4,5 5 5,5 6 6,5
4)
2)
5 6 7 8 9 10 11 12 13
4)
2)
5 6 7 8 9 10 11 12 13
4)
2)
5 6 7 8 9 10 11 12 13
4)
18
-
30°
60°
20°
60°
90°
(
)
)
(
(
)
ACCORDING TO (EU) No 1015/2010 and
Please read these notes:
* Maximum load capacity of dry clothes,
according to the model used (see control panel).
(Only for models with liquid detergent compartment)
When only a limited number of articles have stains which require treatment with liquid bleaching agents, preliminary removal of stain can be carried out in the washing machine. Pour the bleach into the liquid bleach compartment
container, inserted into the
marked "2" in the
detergent drawer, and set the special programme RINSE. When this phase has terminated, switch off the appliance, add the rest of the fabrics and proceed with a normal wash on the most suitable programme.
** STANDARD COTTON PROGRAMMES
No 1061/2010.
COTTON PROGRAMME WITH A TEMPERATURE OF 60°C.
COTTON PROGRAMME WITH A TEMPERATURE OF 40°C.
These programmes are suitable to clean normally soiled cotton laundry and they are the most efficient programmes in terms of combined energy and water consumptions for washing cotton laundry. These programmes have been developed to be compliant with the temperature on the wash label on the garments and the actual water temperature may slightly differ from the declared temperature of the cycle.
EN
( ) Only with PREWASH option
selected (programmes with PREWASH option available).
1) When a programme is selected,
on the display is shown the display shows the recommended wash temperature that can be reduced (where allowed) by the relevant button.
2) For the programmes shown you
can adjust the duration and intensity of the wash using the STAIN LEVEL button.
3) In the programmes specified, the
STAIN LEVEL/ALTERNATIVE PROGRAMME SELECTION button may be used to select an alternative to the pre-set programme (in the case of the SAVING 14'-30'-44' programme, it allows you to choose one of the three available durations).
4) Steam Function Available
!
19
To clean different types of fabrics and various levels of dirt, the washing machine has specific programs to meet every need
The perfect combination of time saving and performance. This programme provides an excellent wash for half a load of laundry in only 39 minutes. Recommended for daily washing of laundry with average levels of
ffers you the freedom to
fading colours together, with a full load, obtaining excellent results in only 59 minutes. With washing at medium temperature, this programme is recommended for laundry
Press the STAIN LEVEL/ALTERNATIVE PROGRAMME SELECTION button to
This programme guarantees fantastic results for cotton laundry. This option is designed to cut washing time at medium temperatures for fairly dirty cotton laundry. Fill the machine only halfway for best
e best possible combination of high temperature, time and cleaning action to guarantee maximum sanitising power against bacteria in only 59 minutes. Recommended for cotton laundry, it washes at a temperature of 60°C and is
Created to remove dirt from technical garments used in the gym and for sports.
s at a
low temperature. Recommended for small
Developed to wash and treat delicate garments and precious fabrics. This programme washes at a low temperature for 59 minutes. Recommended for small
Saving without compromising! This new programme may be used to obtain excellent results while saving water, energy, detergent and time. This option washes at a medium temperature suitable for any kind of
Use the STAIN LEVEL/ALTERNATIVE PROGRAMME SELECTION button to
Press the STAIN LEVEL/ALTERNATIVE PROGRAMME SELECTION button to
m performs 3 rinses with an intermediate spin (which can be reduced or excluded by using the appropriate button). It is used for rinsing any type of fabric, for
The program completes the drain and a maximum spin. It is possible to delete or reduce the spin through the SPIN
This program performs a wash cycle dedicated to the wool fabrics that can be
the
Description of programmes
of washing (see table of programmes).
Choose programme in accordance with the laundry instructions appearing on labels, especially the maximum recommended temperature.
DAILY 39'
soiling.
MIXED & COLOURED 59'
This programme o wash all kinds of fabrics and non-
that is not particularly dirty.
PERFECT COTTON 59'/HYGIENE PLUS 59'
choose one of the two available programmes:
- PERFECT COTTON 59'
results.
- HYGIENE PLUS 59'
This programme offers th
best used with small loads.
!
SPORT PLUS 29'
The programme washes for 29 minute
loads of synthetic garments.
DELICATE 59'
loads.
SAVING 14'-30'-44'
fabric. Recommended for small loads.
choose one of the three available durations.
RINSE/DRAIN & SPIN
choose one of the two available programmes:
- RINSE
This progra
example after a wash carried out by hand.
- DRAIN & SPIN
SELECTION button.
WOOL/HAND WASH
washed in a washing machine, or articles to be washed by hand.
20
SYNTHETIC AND COLOURED
This programme allows you to wash different type’s fabrics and different colours all together. The rotation movement of the drum and the water levels are optimized, both during the washing the rinsing phase. The accurate spin action, ensures a reduced formation of creases in the fabrics.
WARNING:
IMPORTANT WASH PERFORMANCE ADVICE.
!
New, coloured garments should be washed separately for at least 5 or 6 washes.
!
Certain large dark items such as jeans and towels should always be washed separately.
Never mix NON COLOURFAST fabrics.
!
ECO 20°
This innovative programme, allows you to wash different fabrics and colours together, such as cottons, synthetics and mixed
fabrics at only 20°C and provides an excellent cleaning performance. Consumption on this program is about 40% of a conventional 40°C cottons wash.
COTTON This program is suitable to clean normally soiled cotton laundry and it is the most efficient program in terms of combined energy and water consumptions for washing cotton laundry.
WHITES
Made to have a perfect washing. The final spin at maximum speed gives more efficient removal.
REMOTE CONTROL (Wi-Fi)
Position that you have to select when you want to enable / disable remote control through the App, via Wi-Fi. In this case, the start of cycle will take place through the App commands. More details in the REMOTE CONTROL (Wi-Fi) section.
EN
!
21
9. TROUBLESHOOTING AND WARRANTY
If you believe the washing machine is not working correctly, consult the quick guide provided below which includes some practical tips on how to fix the most common problems.
ERROR CODE FORMAT
Models with a display: the error is shown by a number preceded by the letter “E”
!
(example: E2 = Error 2).
!
Models without display: an error is shown by a sequence of flashes of every LED. The error code is shown by the number of flashes followed by a pause of 5 seconds (example: two flashes – pause 5 seconds – two flashes – repeating = Error 2).
Error shown Possible causes and practical solutions
E2 (with display) 2 flashes of the LEDs (without display)
E3 (with display) 3 flashes of the LEDs (without display)
E4 (with display) 4 flashes of the LEDs (without display)
E7 (with display) 7 flashes of the LEDs (without display)
Any other code
The machine cannot load water.
Make sure the water supply tap is open. Make sure the water supply hose isn’t bent, kinked or trapped. Make sure the drain pipe is at the proper height (see installation section). Close the water supply tap, unscrew the filler hose from the back of
the washing machine and make sure the “anti-sand” filter is clean and not blocked. Check that the filter is not clogged or that there are no foreign bodies inside the filter compartment that can obstruct the proper flow of water.
The washing machine does not drain water.
Check that the filter is not clogged or that there are no foreign bodies inside the filter compartment that can obstruct the proper flow of water. Make sure the drain hose isn’t bent, kinked or trapped. Make sure the home drainage system is not blocked and is allowing water to flow through without obstruction. Try to drain the water in the sink.
There is too much foam and/or water. Ensure the correct amount of detergent is being used and the
detergent is designed for use in a washing machine. Door problem.
Make sure the door is correctly closed. Make sure the clothes inside the drum are not preventing the door from closing fully.
If the door is locked, turn off and unplug the washing machine from the electrical supply socket, wait 2-3 minutes and reopen the door.
Turn off and unplug the washing machine, wait a minute. Turn on the machine and restart a program. If the error occurs again contact an Authorised Customer Service Centre directly.
22
!
OTHER ANOMALIES
Problem Possible causes and practical solutions
The washing machine does not work / start
Water leaked on the floor near the washing machine
The washing machine does not spin
Strong vibrations / noises are heard during the spin cycle
Make sure the product is plugged into a working supply socket. Make sure power is on. Make sure the wall socket is working, testing it with another appliance such as a lamp. The door may not be correctly closed: open and close it again. Check whether the required program was correctly selected and the start button pressed. Make sure the washing machine is not in pause or time delay mode. This may be due to a leak from the seal between the tap, supply hose and fill valve; in this case, replace it and tighten the hose connections correctly. Make sure the front filter is correctly closed. The machine is fitted with a detection system that protects the load and product from damage if the load is not balanced before spinning. This may result in:-
The machine attempts to balance the load, increasing the time of spin.
Reduction of the speed of spin to decrease vibrations and noise.
The spin cycle aborting to protect the machine and load.
If this is experienced remove the load de-tangle it, reload it and restart the spin program. This could be due to the fact that water has not been completely drained: wait a few minutes. If the problem persists, see Error 3 section. Some models include a "no spin" function: make sure it is not selected. Check which options are selected and their effect on the spin cycle.
Excessive detergent can impede the spin cycle, ensure the correct amount of detergent is being used.
The washing machine may not be fully levelled: if necessary, adjust the feet as indicated in the specific section. Make sure transport screws, rubber bungs and spacer tubes were removed. Make sure there are no foreign objects inside the drum (coins, hinges, buttons, etc).
The standard manufacturer warranty covers faults caused by electrical or mechanical faults in the product due to an act or omission of the manufacturer. If a fault is found to be caused by factors outside the product supplied, miss-use or as a result of the instructions on use not being followed, a charge may be applied.
EN
23
!
The use of ecological detergents without
: This effect is tied to the suspended zeolites which do not have negative effects on rinse
white powder (zeolites) on laundry at
: this is normal, the
powder is not absorbed by fabric and
move the zeolites, select a rinse
programme. In the future consider using
: this does not necessary indicate poor rinsing. Consider using less detergent in future
often due to the anionic surfactants found in the detergents which are hard to eliminate
rinse to eliminate
We suggest conducting a maintenance
If the problem persists or if you suspect a malfunction, immediately contact an Authorised Customer Service Centre.
It is always recommended to use original spare parts, that are available at our Authorised Customer Service Centres.
Moreover, it also reserves the right to
phosphates may cause the following effects:
- cloudier rinse drain water
efficiency.
-
the end of the wash
does not change its colour. To re
slightly less detergent.
- foam in the water at last rinse
washes.
- abundant foam: This is
from laundry. In this case, do not re­these effects: it will not help at all.
wash using a proprietary cleaner.
Warranty
The product is guaranteed under the terms and conditions stated on the certificate included with the product. The certificate has to be stored so as to be shown to the Authorized Customer Service Centre in case of need. You can also check the warranty conditions on our web site. To obtain assistance, please fill in the form on-line or contact us at the number indicated on the support page of our web site.
By placing the
mark on this product, we are confirming compliance to all relevant European safety, health and environmental requirements which are applicable in legislation for this product.
The manufacturer declines all responsibility for any printing errors in the booklet included with this product.
make any changes deemed useful to its products without changing their essential characteristics.
!
24
www.candy-group.com
WIRELESS PARAMETERS
Parameter
Specifications
(Wi-Fi)
Specifications
(Bluetooth)
Wireless Standard 802.11 b/g/n Bluetooth v4.2
Frequency range 2,412 GHz. - 2,484 GHz. 2,412 GHz. - 2,484 GHz.
EN
Max Transmit Power
Minimum Receiving Sensitivity
802.11b, DSSS 1 Mbps = +19.5 dBm
802.11b, CCK 11 Mbps = +18.5 dBm
802.11g, OFDM 54 Mbps = +18.5 dBm
802.11n, MCS7 = +14 dBm
802.11b = 1024 bytes,
-80 dBm
802.11g = 1024 bytes,
-70 dBm
802.11n = 1024 bytes,
-65 dBm
802.11n HT40 = 1024 bytes,
-65 dBm
Basic data Rate:
RF Transmit Power (Typ): +4 dBm
Enhanced data Rate:
RF Transmit Power (Typ): +2 dBm
BLE
RF Transmit Power (Typ): +7.5 dBm
Basic data Rate:
Sensivity @ 0.1% BER:
-98 dBm
Enhanced data Rate:
Sensivity @ 0.01% BER:
-98 dBm
BLE
Sensivity @ 0.1% BER:
-98 dBm
With this the
with
complies with the essential requirements of the Directive 2014/53/EU.
Candy Hoover Group Srl
, declares that this appliance marked
To receive a copy of the declaration of conformity, please contact the manufacturer at:
25
!
hldsk
hldsk
- WM Rapidó -
19.03 - 43029020 - Canon Italia - Business Services Channel
Loading...