Candy LB CTS 82 User Manual

Page 1
WASHING MACHINE CANDY CTS 82
B
1
C2
A PROGRAMME/TEMPERATURE SELECTOR
B1 WASH TEMPERATURE SELECTOR
C1 SPIN REDUCTION
C2 EXTRA RINSE
H
A
p
H START/STOP KEY
p CONTROL POSITION INDICATOR
Page 2
Table of programmes mod.CTS 82
programme programme for
1. fast coloureds with prewash
2. fast coloureds
*3. fast coloureds
4. delicate coloureds
COTTONS
SYNTHETICS
SPECIAL
bleach/whitener
vigorous rinse
vigorous spin
5. mixed synthetics
6. coloureds
7. acrylics
gentle rinse
gentle spin
8. delicates
9. woolmark woollens
10. hand wash
gentle rinse
DELICATES
gentle spin
empty
fast 32 min.
aprox.
time min.
170
140
134
80
54
30
7
95
86
72
43
4
63
54
48
34
4
4
32
Máx. temp.
setting
ºC
90º
90º
60º
40º
60º
50º
40º
40º
40º
30º
50º
Máx. spin
speed
800
800
800
800
800
800
800
800
800
800
800
800
400
800
800
800
800
800
Máx.
Washing powder load Option keys C
load
kg
III
5
•••
5
5
5
5
2
2
2
1,5
1
2
2
* Programme as per EN 60456
Mains
voltage
230 V. /
50 Hz.
Technical data mod. CTS 82
Wash power rating
175 W.
Spin power rating
340 W. 30 W. 1950 W. 2200 W. 10 A. 0,05-0,8
Pump motor power rating
Heating element
power rating
Max.
power
input
Mains fuse
amp. rating
Water
pressure
Mpa
Water
consumption
* prog.
EN 60456
consumption
48 l. 1,03 Kw/h.
Energy
* prog.
EN 60456
Page 3
PREPARING THE WASH CYCLE
1.- Once the washing is loaded, ensure that the drum doors are properly closed.
2.- Add detergent and additives, not exceeding the maximum level indicator.
• detergent for pre-wash I
• detergent for wash programme II
• bleach
• fabric conditioner
SELECTING THE DESIRED PROGRAMMES AND OPTIONS
3.- Tu rn the programme selector (A) to the desired programme. (clokwise).
4.- Press the key or keys for any options desired (C1, C2).
C1: spin reduction key
This reduces spin speed to the figures indicated (400) at the press of the key.
C2: extra rinse key
The electronic system engaged by this key activates a new special rinse cycle. More water and a combination of drum rotation movements ensure that washing is perfectly rinsed. The key can be activated in Cottons, Mixed, Synthetics and Delicates programmes.
5.- Select wash temperature if required (B1)
B1 temperature selector
Use this control to select the wash temperature within the range for the programme selected (see programme table). The control can be turned in both directions. Select the required temperature before starting
the programme.
6.- Once you have selected the desired options, press the START key (H). The washing machine will start up . To cancel an option after setting, just press the option key again.
To change or cancel a programme
To change or cancel a programme once the programme selected has started, proceed as follows:
- Press the key (H). The programme has been cancelled, and another may be selected.
- Select the new programme.
- Press (H) again.
- The machine will then run the new programme selected
Page 4
Programme Pause
To pause the wash programme so that more washing can be added, proceed as follows:
- Hold down the key (H). When the door lock disengages (after approx. 2 minutes), open the door and put the additional washing into the drum.
- Close the door and press (H) again.
- The machine will continue with the programme.
END OF PROGRAMME For safety’s sake, set the programme selector or the start/stop key to OFF when the programme ends.
12-04 / 46002007/ EN
Loading...