Candy LB CTE 81 SY User Manual

Page 1
EN
INTRODUCTION
Read this manual carefully as it offers practical advice to help you get the most from your washing machine.
This Instruction Manual contains everything you need to know about the everyday running of your machine. Keep it for future reference.
An Installation and Maintenance Manual is also provided which you should consult during the installation and routine maintenance of your washing machine. The manual also contains information about possible working problems, advice about the wash load, an explanation of label symbols and hints about how to remove
stubborn stains.
1.- CONTROL PANEL
2.- LID
3.- DRUM
4.- DETERGENT COMPARTMENT
5.- FILTER DOOR
6.- FILTER
When contacting a CANDY or one of its Technical Assistance Cen­tre always refer to the model (see control panel) and the registration
and series numbers which are indicated at the bottom of the machine under the lower panel or on the warranty certificate. That is to say, everything that appears in the box. Providing this information will ensure a faster and more efficient service.
27
Page 2
INDEX
page
GUARANTEE..............................................................................
TECHNICAL DATA .......................................................................
OPENING THE LID – LOADING ................................................
DETERGENT DISPENSER ........................................................
AUTOMATIC VARIABLE CAPACITY - FUZZY LOGIC
ELECTRONICS ...........................................................................
PROGRAMME SELECTION .......................................................
CONTROL DESCRIPTION ..........................................................
TABLE OF PROGRAMMES .......................................................
29
30
31
32
33
33
34
37
Place the attached «program label» in the corresponding language in the rear slot of the panel window.
28
Page 3
GUARANTEE
A
1.
The appliance comes with a guarantee certificate.
SERVIC
2.
Complete part A and keep it in a safe place. It should be presented to the Technical Assistance Centre in the event of a repair being necessary along with the legal receipt issued by the dealer on purchase.
E
29
Page 4
TECHNICAL DATA
CTE 81
Load capacity ........................................................................
Voltage .....................................................................................
Wash motor power rating ........................................................
Spin motor power rating ..........................................................
Electropump power rating .......................................................
Heating element power rating .................................................
Max. power input .....................................................................
Fuse ........................................................................................
Water pressure ...................................................................
Spin speed ..............................................................
Water consumption (60º C programme) ................................
Energy consumption (60º C programme)/5 kg...................
Energy efficiency rating ..............................................................
r.p.m./min
kg.
W. W. W. W. W.
MPa
lit.
kWh
V.
A.
5 230 175 300 30
1.950
2.200 10 0,05 min. 0,8 max. 800 48 0,95
A
30
Page 5
OPENING THE DRUM
WASHING
MACHINE LID
1.
Lift the lid (A) and open it completely. Next, open the drum door following these instructions:
2.
Place your hand on the rear door (D). Hold the catch (B) down. Press the front door (
D
).
C
) to unlock the two doors (C and
3.
Open the rear door (D). Open the front door (C). Place the washing in the drum.
WASHING MACHINE
FRONT OF THE
4.
Close the front door (C). Close the rear door (
D
) so that the front door (C)
fasteners fit perfectly into the slots.
WASHING MACHINE
FRONT OF THE
5.
Ensure that the doors fit together perfectly and are properly closed.
ATTENTION: CLOSE THE DRUM CAREFULLY. OTHERWISE, THE MACHINE OR THE LAUNDRY COULD GET DAMAGED.
WASHING MACHINE
FRONT OF THE
2 min.
ATTENTION: A special safety device prevents the lid from being opened immediately after the wash has finished. Once the spin cycle has finished, wait for 2
WASHING MACHINE
FRONT OF THE
minutes before trying to open the lid.
31
Page 6
DETERGENT DISPENSER
The detergent dispenser is divided into 4 compartments:
Compartment I, is for prewash powder detergent. The recommended quantity is 60 gm of detergent (for 5 kg of laundry).
Compartment II, is for wash powder detergent. The recommended quantity is 120 gm of detergent (for 5 kg of laundry).
• The compartment is for bleach. The recommended quantity is 7 cl.
• The compartment is for fabric conditioners, scenting agents and special additives. The recommended quantity is 5 cl.
The detergent compartment has two guidance lines:
• RECOMMENDED (lower line). This indicates the recommended level for the prewash and wash compartments.
• MAX. This indicates the maximum level which should never be exceeded.
MAXIMUM
(wash)
MAXIMUM (prewash)
MAXIMUM
RECOMMENDED
(bleach and scenting agent)
Note: WE RECOMMEND USING DETERGENT IN POWDER FORM WHENEVER A PRE-WASH IS PROGRAMMED.
32
Page 7
AUTOMATIC VARIABLE CAPACITY – FUZZY LOGIC ELECTRONICS
This machine has electronics that automatically process all stages of the wash to ensure exceptional results and at the same time save you time and money. Once a programme has been selected, the machine
optimises the following elements
depending on the wash load and type of fabric:
- quantity of water and power consumption
-wash time
-drum rotation rate
-rinse efficiency
The washing machine also:
- detects suds and increases the amount of rinse water if necessary
- adjusts spin speed according to load distribution, thus forestalling any imbalance in the mechanism.
EXAMPLE: COTTONS PROGRAMME AT 60º
LOAD
POWER
TIME MIN.
WATER LITRES
KWH
(5 KG)*
0,95
134
48
HALF LOAD
GAIN WITH REGARD TO
5 kg CYCLE
APPROX.
5%
20%
20%
SMALL LOAD
GAIN WITH REGARD TO
5 kg CYCLE
APPROX.
30%
30%
50%
FULL LOAD
The programme duration indicated is APPROXIMATE.
PROGRAMME SELECTION
WHEN SELECTING A PROGRAMME, ENSURE THAT THE START/STOP BUTTON IS NOT ACTIVATED.
To select a programme:
• Programmes are selected by means of the corresponding control knob (A). See the table of programmes.
• Select the wash temperature by means of the corresponding control knob.
• Select spin speed
• Select the different options available by pressing the corresponding buttons.
33
Page 8
CONTROL DESCRIPTION
CTE 81
Programme selector knob ...........................................................
Temperature selector knob .........................................................
Spin selector ...............................................................................
Easy-iron button .........................................................................
Super rinse button ......................................................................
ON/OFF pilot light .......................................................................
ON/OFF button ...........................................................................
Reference indicator ....................................................................
34
A
B
C
D
E
G
H
p
Page 9
USE OF THE SELECTION CONTROLS
A
. PROGRAMME SELECTOR KNOB
This control allows you to select the washing programmes. Turn the selector so that the number or symbol of the desired programme is opposite the reference indicator (p).
ALWAYS ROTATE the control in a clockwise direction, never in an anticlockwise direction. Do not press the “on” button (H) before selecting the programme
If you wish to modify the position of the control or select another programme once a cycle has commenced, press the On/Off button. Press again to recommence once the modification has been completed.
B
. TEMPERATURE SELECTOR KNOB
THE KNOB CAN BE TURNED IN BOTH DIRECTIONS.
This control allows you to select the temperature of your wash.
If you wish to carry out a cold wash, turn the knob until the cold symbol coincides with the selector mark.
.
C.
SPIN SELECTOR
Do not exceed the maximum temperature recommended for each cycle in the table of programmes.
THE CONTROL CAN BE TURNED IN BOTH DIRECTIONS
This is one of the most important parts of the wash cycle. This machine has a spin cycle flexible enough to meet all requirements.Turn the selector to reduce maximum and intermediate spin speeds. Spin can even be eliminated altogether (setting ).
NB: THE ELECTRONICS IN THE MACHINE DISABLE THE SPIN FUNCTION WHEN THE LOAD IS UNEVENLY DISTRIBUTED, AND LIMIT VIBRATIONS AND NOISE DURING WASHING.
35
Page 10
USE OF THE SELECTION CONTROLS
D.
EASY IRON BUTTON
This function helps reduce creasing, depending on the programme selected and the type of fabric washed.
MIXED FABRICS:
- the water is cooled gradually to prevent heat shock
- the drum is not moved mechanically during emptying
- a mild spin is used to ensure that fibres are smoothed out as much as possible.
DELICATE FABRICS (OTHER THAN WOOLLENS):
- The machine operates as indicated above and stops with the drum full of water after the last rinse.
WOOLLENS:
- The machine stops with the drum full of water.
To complete the cycle, proceed as follows
1.- Disengage the Easy Iron (wrinkle reduction) button. The cycle will then run to completion, with emptying and spin.
2.- Or just empty the drum:
- stop the machine by pressing Start/ Stop.
- set the programme control to OFF.
- select programme .
- wait 5 seconds.
- start up the machine.
E.
SUPER RINSE BUTTON
The new electronic system engaged by this button activates a special rinse cycle. More water and a new combination of drum rotation movements during filling and emptying ensure that washing is perfectly rinsed.
This function is designed for people with sensitive, delicate skins in whom even tiny amounts of bleach could cause irritation or allergic reactions. It is also recommendable for washing baby clothes, heavily soiled clothes which need large amounts of bleach and spongy articles which tend to retain bleach.
G.
H
. ON/OFF BUTTON
ON/OFF PILOT LIGHT
36
Page 11
TABLE OF PROGRAMMES
TYPE OF
FABRIC
RAPID PROGRAMME
PROGRAMME FOR
Rapid 32 minute super cycle
MAX.
LOAD Kg
2
APRROX.
TIME (min)
32
32´
SELEC.
PROGR.
SEL.
TEMP.
ºC
From cold to
…50º
DETERGENT
LOAD
I
II
CTE 81
BUTTON
INTENSIVE WITH PREWASH
*
RESISTANTS
MIXED
SYNTHETICS
FABRICS
EXTREM. DELIC,
NORMAL SOILING
COLOURS FAST
COLOURS DELICATES
BLEACH
Organic stains
ENERGETIC RINSES
ENERGETIC SPIN
NORMAL SOILING
COLOURS FAST
COLOURS DELICATES
DELICATE RINSES
DELICATE SPIN
DELICATES
WOLL
«Machine washable»
HAND WASH
DELICATE RINSES
DELICATE SPIN
WATER DISCHARGE
3,5
1,5
1,5
10
1
2
3
4
5
6
7
8
9
From cold to
…90º From cold to
…90º From cold to
…60º From cold to
…40º
From cold
to
…60º From cold
to
…50º From cold
to
…40º
From cold to
…40º From cold to
…40º From cold to
…30º
170
5
140
5
134
5
82
54
30
7
95
2
86
2
72
2
43
4
63
54
1
48
34
4
Programme * , as per EN standard 60456. The programme times indicated are approximate.
There are 3 programme groups (COTTONS, SYNTHETICS, DELICATES). The first programmes in each group are the longest, and therefore those that ensure the most effective wash results. Use the remaining programmes only for lightly soiled washing and especially delicate garments.
37
Page 12
NOTE:
1. If the wash load is very dirty it is best to reduce the load weight to 3 kg.
2. Programmes 1-2- have an automatic bleaching option. Simply place the bleaching
agent in the compartment.
3. The washing machine is designed to incorporate fabric softener automatically in the last rinse of each washing cycle.
32’ FAST PROGRAMME
This programme runs through a full wash cycle for a maximum of 2 kg of washing at 50 ºC in just 32 minutes. Put the detergent in dispenser I. Use no more than approximately 1/4 of the recommended amount of bleach (35 g. at most). The 32’ fast programme can also be used as a pre-wash cycle for particularly heavily soiled garments before the re­gular wash programme desired.
38
Loading...