WASHING MACHINE CANDY CTA 84 AA
B
S
V
C3C2C1 H G
A PROGRAMME/TEMPERATURE SELECTOR
B SPIN SPEED SELECTOR
C1 EASY IRON
C2 EXTRA RINSE
C3 SUPER FAST
5
R
A
p
G DOOR LOCK LAMP
H START/STOP KEY
S STOP/END OF CYCLE LAMP
V TIME REMAINING OR PROGRAMME PHASE LAMPS
p CONTROL POSITION INDICATOR
Table of programmes mod. CTA 84 AA
Mains
voltage
Wash
power
rating
Spin
power
rating
Pump
motor
power
rating
Heating
element
power rating
Max.
power
input
Mains fuse
amp. rating
Water
pressure
Water
consumption
* prog.
EN 60456
Energy
consumption
* prog.
EN 60456
230 V. /
50 Hz.
175 W. 340 W. 30 W. 1950 W. 2200 W. 10 A. 0,05-0,8
Mpa
48 L. 0,85 Kw/h.
COTTONS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
whites
fast coloureds with prewasch
*fast coloureds
fast coloureds
delicate coloureds
delicate coloureds
fast coloureds with prewasch
fast coloureds
delicate coloureds
delicate coloureds
delicate coloureds
delicate coloureds
delicates
woolmark woollens
woolmark woollens
hand wash
rinse
spin
empty
simplissimo
fast 32 min.
140
160
135
105
100
95
100
85
75
70
70
65
50
50
50
50
25
9
4
170
32
800
800
800
800
800
800
800
800
800
800
800
800
400
800
800
800
800
800
800
800
5
5
5
5
5
5
2
2
2
2
2
2
1,5
1
1
2
5
2
90º
60º
60º
40º
30º
15º
60º
60º
50º
40º
30º
15º
40º
30º
15º
30º
40º
40º
•
•
•
I II
SYNTHETICSDELICATES
SPECIFIC
PROGRAMMES
R
5
MIX
&
WASH
programme programme for
aprox.
time
min.
Máx.
temp.
setting
Máx.
spin
speed
Máx.
load
kg
Washing powder load Option keys C
Technical data mod. CTA 84 AA
* Programme as per EN 60456
PREPARING THE WASH CYCLE
1.- Once the washing is loaded, ensure that the drum doors are properly closed..
2.- Add detergent and additives, not exceeding the maximum level indicator.
• detergent for pre-wash I
• detergent for wash programme II
• bleach
• fabric conditioner
SELECTING THE DESIRED PROGRAMMES AND OPTIONS
3.- Turn the programme selector (A) to the desired programme.
4.- Press the key or keys for any options desired (C1, C2, C3).
C1 easy iron key
This function helps reduce creasing, depending on the programme selected and the type
of fabric washed. This works as follows:
Synthetics. Intermediate spins during rinses are eliminated.
Delicates. Intermediate spins during rinses are eliminated and the machine stops before
the final spin, which is a gentle spin.
Woollens. Intermediate spins during rinses are eliminated and the machine stops before
the final spin.
Hand wash. The machine stops before the final spin.
Rinses. Intermediate spins during rinses are eliminated.
To complete the wash cycle in the Delicates, Hand wash, and Woollens programmes , press
the Easy Iron key again: the machine will empty and perform the required spin.
To empty machine of water with no spin, cancel the ongoing programme and select the
empty programme.
C2 extra rinse key
The electronic system engaged by this key activates a new special rinse cycle. More water
and a combination of drum rotation movements ensure that washing is perfectly rinsed.
The key can be activated in Cottons, Mixed, Synthetics, Delicates, Rinse, Woollens,
Sportswear and AA40 programmes.
C 3 super fast key
When this key is engaged programme times are cut b y as m uch as 50 min utes, depending
on the wash programme and temperature selected. The key can be activated only in Cottons,
Synthetics and Mixed programmes.
5.- Select spin speed if required (B)
B spin selector
Use this control to select the maximum spin speed within the range for the model of washing
machine in question and the programme selected (see programme table). The control can
be turned in both directions. Spin speed may be selected at any time during the
programme.
6.- Once you have selected the desired options , press the START key (H). The washing machine
will start up and one of the time remaining or programme phase lamps (V) will come on. This
lamp indicates approximately how much time is left before the wash programme is completed
(or wash cycle phase): it will change as the prog ramme progresses . Make sure that the stop/end
of cycle lamp is flashing before pressing the start key (H). If it remains on continuously, tur n
the programme selector to OFF and re-set it to the desired programme.
T o cancel an option after setting, just press the option key again (the indicator lamp will
go out).
To change or cancel a programme once the programme selected has started, proceed as
follows:
- Hold down the start key (H) until the stop/end of cycle lamp is burning steadily. The
programme has been cancelled, and another may be selected.
- Select the new programme.
- Press the start key (H) again until one of the time remaining or programme phase lamps
lights up.
- The machine will then run the new programme selected.
Programme Pause
To pause the wash programme so that more washing can be added, proceed as follows:
- Hold down the start key (H) until the option key lamps begin to flash and the time remaining
or programme phase lamp lights up.
- When the Door Lock lamp goes out (after approx. 2 minutes, or 5 minutes if the machine
is equipped with the STOP & LOAD function), open the door and put the additional w ashing
into the drum.
- Close the drum door and the lid properly.
- Press the start key (H), the time remaining or programme phase lamp will light up and
the machine will continue with the programme.
When the programme is completed the Stop/End of cycle lamp (S) will come on and the time
remaining or programme phase and Door Lock lamps (V and G) will go out.
For your own safety, set the programme selector to OFF before opening the washingmachine lid and the drum doors to remove the washing.
07-04 / 46001778 EN
Loading...