Candy CTD12662 User Manual [EN]

WASHING MACHINE CTD 12662
B1 D V I C4 A
G C1 C2 B2 B3 C3 H p
Use this control to select the desired wash programme. Turn the selector (it can be turned in both directions) so that the programme is opposite the reference indicator (p). The temperature selected will depend on the programme. (See the Programme
Table).
B1 SPIN SPEED SELECTOR B
2 DELAY START
B3 WASH TEMPERATURE
C1 PRE-WASH
2 AQUAPLUS (SENSITIVE KEY)
C
3 EASY IRON (minutes)
C
4 DEGREE OF SOILING
C
G DOOR - PROGRAMME START LIGHT H START/STOP KEY
I KG. DETECTOR LIGHT D DELAY START LIGHT V “DIGITAL” Display
the machine
The display’s indicator system allows you to be constantly informed about the status of
p CONTROL POSITION INDICATOR
 
Programme table mod CTD 12662
aprox.
time
programme programme for
White
Fast coloureds
*
COTTONS
min.
display 90º 1200 display 60º
max.
temp.
setting
ºC
max. spin
speed
rpm/min
1200 6
washing powder max. load
Kg.
6
load option keys C
I
II
     
MIXED
SYNTHETICS
DELICATES
SPECIAL
Fast coloureds
Delicates display 40º 600 1,5
Woollens
Hand wash
Gentle rinse
Gentle spin display 1200
Empty
Mix&wash (M&W) display 40º 1000 6
Fast 14'
display 60º 800
display
display
display
display
40º 800 1
30º 800 2
800
14’ 30º 800 30’ 40º 800 44’ 40º 800
2
   
   
2
 
2
 
3,5
 
  
 
 
* Programme also recommended for low-temperature washes (lower than the max. shown). Programme tested in accordance with CENELEC EN 60456 with the maximum Degree of Soiling selected.
Technical data mod. CTD 12662
Mains
voltage
220-230V.
50Hz.
Heating
Wash power
rating
175 W. 400 W. 30 W. 2150 W. 2150 W. 10 A.
Spin power
rating
Pump motor power rating
element
power rating
Max. Power
input
Mains fuse Amp. rating
Water
pressure
0,05-0,8
Mpa
Water
consumption
*prog.
EN60456
49 L. 1,02 Kw.
Energy
consumption
*prog.
EN60456
IMPORTANT:
- Do not use liquid detergent for programs with a prewash cycle and/or timed start.
PREPARING THE WASH CYCLE
1.- Once the washing is loaded, ensure that the drum doors are properly closed..
2.- Add detergent and additives, not exceeding the maximum level indicator.
- detergent for pre-wash I
- detergent for wash programme II
- fabric conditioner
SELECTING THE DESIRED PROGRAMMES AND OPTIONS
3.- Turn the programme selector (A) to the desired programme.
4.- Alternatively, if you wish, you can use the key B3 to choose washing temperature.
Loading...
+ 2 hidden pages