Candy CST G382D User Manual

DA
SV
FI
EN
Thank-you for choosing a Candy washing machine. We are confident it will loyally assist you in safely washing your clothes, even delicates, day after day.
You can register your product at www.registercandy.com to gain faster access to supplementary services solely reserved to our most loyal customers.
Carefully read this manual for correct and safe appliance use and for helpful tips on efficient maintenance.
Only use the washing machine after carefully reading these instructions. We recommend you always keep this manual on hand and in good condition for any future owners.
Please check that the appliance is delivered with this instruction manual, warranty certificate, service centre address and energy efficiency label. Also check that plugs, drain hose support hook and liquid detergent or bleach tray (only on some models) are included. We recommend you keep all these components.
Each product is identified by a unique 16­character code, also called the “serial number”, printed on the sticker. This can be found inside the door opening. This code is a unique code for your product that you will need to register the product warranty, or if you need to contact the Customer Service Centre.
This appliance is marked according to the European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE).
WEEE contains both polluting substances (which can cause negative consequences for the environment) and basic components (which can be re-used). It is important to have WEEE subjected to specific treatments, in order to remove and dispose properly all pollutants, and recover and recycle all materials. Individuals can play an important role in ensuring that WEEE does not become an environmental issue; it is essential to follow some basic rules:
! WEEE should not be treated as household
waste;
! WEEE should be handed over to the relevant
collection points managed by the municipality or by registered companies. In many countries, for large WEEE, home collection could be present.
In many countries, when you buy a new appliance, the old one may be returned to the retailer who has to collect it free of charge on a one-to-one basis, as long as the equipment is of equivalent type and has the same functions as the supplied equipment.
1. GENERAL SAFETY RULES
2. INSTALLATION
3. PRACTICAL TIPS
4. MAINTENANCE AND CLEANING
5. QUICK USER GUIDE
6. CONTROLS AND PROGRAMS
7.
THROUBLESHOOTING AND WARRANTY
Environmental conditions
Contents
EN
1. GENERAL SAFETY RULES
! This appliances is intended to
be used in household and similar applications such as:
- Staff kitchen areas in shops, offices and other working environments;
- Farm houses;
- By clients in hotels, motels and other residential type environments;
- Bed and breakfast type environments.
A different use of this appliance from household environment or from typical housekeeping functions, as commercial use by expert or trained users, is excluded even in the above applications. If the appliance is used in a manner inconsistent with this it may reduce the life of the appliance and may void the manufacturer’s warranty. Any damage to the appliance or other damage or loss arising through use that is not consistent with domestic or household use (even if located in a domestic or household environment) shall not be accepted by the manufacturer to the fullest extent permitted by law.
! This appliance can be used by
children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance
in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
! Children should be supervised
to ensure that they do not play with the appliance.
! Children of less than 3 years
should be kept away unless continuously supervised.
! If the supply cord is damaged, it
must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
! Only use the hose-sets
supplied with the appliance for the water supply connection (do not reuse old hose-sets).
! Water pressure must be between
0,05 MPa and 0,8 MPa.
! Make sure that a carpet do not
obstruct the base of the machine and ventilation openings.
! The OFF condition is reached
by
placing the reference mark on the programmes control/knob in the vertical position. Any other different position of such control sets the machine in ON condition (only for models with programmes knob).
! After installation, the appliance
must be positioned so that the plug is accessible.
! The maximum load capacity of
dry clothes depends on the model used (see control panel).
! To consult the product fiche
please refer to the manufacturer website.
! Before cleaning or maintaining
the washing machine, unplug the appliance and turn off the water faucet.
! Make sure the electrical system
is grounded. Otherwise, seek qualified professional assistance.
! Please do not use converters,
multiple sockets or extension cords.
! Do not pull on the power cord
or appliance to unplug the machine.
! Do not expose the washing
machine to rain, direct sunlight or other weather elements.
! In the event of fault and/or
malfunction, turn off the washing machine, close the water faucet and do not tamper with the appliance. Immediately contact the Customer Service Centre and only use original spare parts. Failure to observe these instruction may jeopardise appliance safety.
By placing the
mark on this product, we are confirming compliance to all relevant European safety, health and environmental requirements which are applicable in legislation for this product.
Safety instructions
WARNING:
water may reach very high temperatures during the wash cycle.
EN
2. INSTALLATION
A
B
B
B
B
A
1
!
Remove the 2 or 4 transportation screws (A) on the back and remove the 2 or 4 flat washers, rubber bungs and plastic spacer tubes (B) as illustrated in figure 1
.
2
!
Fit the trims provided "C" (fig. 2).
3
4
min 50 cm max 85 cm
+2,6 mt
max
max 100 cm
min 4 cm
5
! The washing machine should be
connected to the water mains via the new tube supplied with the appliance (inside the drum). Do not use the old tube for this purpose.
! Connect one end of the water inlet
pipe with the elbow bend to the electrovalve (top rear part of the machine) and the other end to a tap or a plumbed-in 3/4" gas threaded connection.
!
Place the washing machine close to the wall, ensuring that there are no bends or kinks anywhere in the tube. Hook the outlet pipe to the edge of the sink or preferably to a fixed drainage outlet of a diameter greater
than that of the outlet pipe and at a height of min. 50 cm. and a maximum of 75 cm. from the floor (fig. 4).
! If necessary, use the curved
accessory to attach and support the outlet pipe more securely.
If your model offers this function:
! To move the washing machine
easily, turn the trolley lever to the right. Once you have finished moving the machine, return the lever to its original position.
! Level the machine by adjusting the
front feet (fig. 5). a) Turn the nut clockwise to release the screw on the foot. b) Raise or lower the foot by rotating it until it stands firmly on the floor. c) Lock the foot in position by turning the nut anticlockwise until it comes up against the bottom of the washing machine.
! Check that the appliance is properly
levelled.
! Check that the washing machine
does not rock by trying to move two diagonally opposite top corners at the same time.
! If you move the washing machine
from one place to another, you must level the feet again afterwards.
EN
! Connect the water hose to the water
supply tap (fig. 6) only using the hose supplied with the appliance (do not reuse old hose-sets).
! Some models may include one or more of
the following features:
! HOT&COLD (fig. 7):
water mains connection settings with hot and cold water for higher energy savings. Connect the grey tube to the cold water faucet and the red one to the hot water faucet. The machine can be connected to the cold water faucet only: in this case, some programs may start a few minutes later.
! AQUASTOP (fig. 8):
a device located on the supply tube that stops water flow if the tube deteriorates; in this case, a red mark will appear in the window “A” and the tube must be replaced. To unscrew the nut, press the one-way lock device "B".
! AQUAPROTECT – SUPPLY TUBE WITH
GUARD (fig. 9):
Should water leak from the primary internal tube "C", the transparent containment sheath "D" will contain water to permit the washing cycle to complete. At the end of the cycle, contact the Customer Service Centre to replace the supply tube.
6
1
7
B
A
8
D
C
9
Hydraulic connections
3. PRACTICAL TIPS
WARNING: when sorting laundry, make sure:
- have eliminated metallic objects such as hair clips, pins, coins, from laundry;
- to have buttoned pillow cases, closed zips, tied loose belts and long robe ribbons;
- to have removed rollers, hooks or clips from curtains;
- to have carefully read clothing washing labels;
- to have removed any persistent stains using specific detergents.
! When washing rugs, bedcovers or other
heavy clothing, we recommend you avoid the spinning cycle.
! To wash wool, make sure the item can be
machine washed and marked by the “Pure virgin wool” symbol with the “Does not mat” or “Machine washable” label.
A guide environmentally friendly and economic use of your appliance.
Maximise The Load Size
! Achieve the best use of energy, water,
detergent and time by using the recommended maximum load size. Save up to 50% energy by washing a full load instead of 2 half loads.
Do you need to pre-wash?
! For heavily soiled laundry only!
SAVE detergent, time, water and between 5 to 15% energy consumption by NOT selecting Prewash for slight to normally soiled laundry.
Is a hot wash required?
! Pretreat stains with stain remover or soak
dried in stains in water before washing to reduce the necessity of a hot wash programme. Save up to 50% energy by using a 60°C wash programme.
Following is a quick guide with tips and recommendations on detergent use at the various temperatures. In any case, always read the instructions on the detergent for correct use and doses.
Load tips
Helpful suggestions for the user
When washing heavily soiled whites, we recommend using cotton programs of 60°C or above and a
normal washing powder (heavy duty) that contains bleaching agents that at medium/high temperatures provide excellent results.
For washes between 40°C and 60°C the type of detergent used needs to be appropriate for the type of fabric and level of soiling. Normal powders are suitable for “white” or colour fast fabrics with high soiling, while liquid detergents or “colour protecting” powders are suitable for coloured fabrics with light levels of soiling.
For washing at temperatures below 40°C we recommend the use of liquid
detergents or detergents specifically labeled as suitable for low temperature washing.
For washing wool or silk, only use detergents specifically formulated for these fabrics.
EN
4. MAINTENANCE AND CLEANING
To clean the washing machine exterior, use a damp cloth, avoiding abrasives, alcohol and/or solvents. The washing machine does not require any special care for ordinary cleaning: clean drawer compartments and the filter; some tips on how to move the machine or on long periods of disuse are provided below.
! The washing machine comes with a
special filter able to trap large residue, such as buttons or coins, which could clog the drain.
! Only available on certain models: pull out
the corrugated hose, remove the stopper and drain the water into a container.
! Before unscrewing the filter, we
recommend you place an absorbent cloth under it to keep the floor dry.
! Turn the filter counter-clockwise to the
limit stop in the vertical position.
! Remove and clean the filter; when
finished, replace it turning it clockwise.
! Repeat the previous steps in reverse
order to reassemble all parts.
! Should the washing machine be stored in
an unheated room for a long period of time, drain all water from tubes.
! Unplug the washing machine.
! Detach the tube from the strap and lower
it, fully draining water into a bowl.
! Secure the drain tube with the strap when
finished.
! Press button (A).
! Hold down the button and turn the
detergent dispenser outwards.
! Remove the dispenser and clean it.
! It is recommended to remove any
remamining detergent in the compartments to avoid any build up that could cause blockages and restrict the water flow from the dispenser to drum.
! Pulling out and extract the trap/traps (S)
that are located in the back part of the dispenser and clean them carefully.
! Remove any solid residue which could
block the holes in the compartments.
B
A
C
S
Fit in the tabs as shown (B). Turn the detergent dispenser towards the housing (C) in the door until the tab clicks into place.
Filter cleaning
Suggestions for moves or prolonged disuse
Cleaning the detergent dispenser and its compartments
Fitting
5. QUICK USER GUIDE
This washing machine automatically adjusts the level of the water to the type and quantity of washing. This system gives a reduction in energy consumption and a saving in washing times.
! Turn on the washing machine and select
the required program.
! Adjust the washing temperature if
necessary and press the required "option" buttons.
! Press the START/PAUSE button to start
washing.
Should power go out when the washing machine is running, a special memory saves the settings and, when power returns, the machine resumes the cycle from where it left off.
! At the end of the programme, the
message "End" will appear on the display or, on some models, all wash stage indicator lights will turn on.
! Turn off the washing machine.
For any type of wash, see the program table and follow the operating sequence as indicated.
Water pressure:
min 0.05 Mpa / max 0.8 Mpa (0.05 MPa dispenses approximately 1 litre of water in 10 seconds)
Spin r.p.m.: See rating plate.
Power input / Power current fuse amp / Supply voltage: See rating plate.
6. CONTROLS AND PROGRAMS
A
E
I
H
OPLMN
D
Q
FGCB
A
Programme selector with OFF position
B
START/PAUSE button
C
DELAY START button
D
OPTIONS button
E
RAPID / STAIN LEVEL button
F
TEMPERATURE SELECTION button
G
SPIN SPEED button
F+G
KEY LOCK
H
Digital display
I
OPTIONS indicator lights
L
DOOR LOCKED indicator light
M
KG DETECTOR indicator light
N
KEY LOCK indicator light
O
TEMPERATURE SELECTION indicator lights
P
SPIN SPEED indicator lights
Q
SMART TOUCH area
Program selection
Wait until the DOOR LOCKED light has gone out before opening the door.
Technical data
EN
! Press the START/PAUSE button to start
the selected cycle.
! Once a programme is selected the
programme selector remains stationary on the selected programme till cycle ends.
! Switch off the washing machine by
turning the selector to OFF.
! Press to start the selected cycle.
ADD OR REMOVE ITEMS AFTER THE PROGRAMMES HAS STARTED (PAUSE)
! Press and hold the START/PAUSE
button for about 2 seconds (some indicator light and the time remaining indicator will flash, showing that the machine has been paused).
! Wait 2 minutes until the safety device
unlocks the door.
! After you have added or removed items,
close the door and press the START/PAUSE button (the programme will start from where it left off).
CANCELLING THE PROGRAMME
! To cancel the programme, set the
selector to the OFF position.
! This button allows you to pre-programme
the wash cycle to delay the start of the cycle for up to 24 hours.
! To delay the start use the following
procedure:
- Select the required programme.
- Press the delay start button once to
activate it (h00 appears on the display) and then press it again to set a 1 hour delay (h01 appears on the display). The pre-set delay increases by 1 hour each
Opening the door
A special safety device prevents the door from being opened immediately after the end of the cycle. Wait for 2 minutes after the wash cycle has finished and the "Door Security" light has gone out before opening the door.
PROGRAMME selector with OFF position
When the programme selector is turned the display lights up to show the settings for the programme selected. For energy saving, at the end of the cycle or with an inactivity period, the display level contrast will decrease.
N.B.: To switch the machine off, turn the programme selector to the OFF position.
The programme selector must be returned to the OFF position at the end of each cycle or when starting a subsequent wash cycle prior to the next programme being selected and started.
START/PAUSE button
Close the door BEFORE selecting the button START/PAUSE.
When the START/PAUSE button has been pressed, the appliance can take few seconds before it starts working.
Before you open the door, please check water level is below the door opening to avoid flooding.
DELAY START button
time the button is pressed, until h24 appears on the display, at which point pressing the button again will reset the delay start to zero.
- Confirm by pressing the START/PAUSE
button. The delay countdown will begin and when it has finished the programme will start automatically.
! It is possible to cancel the delay start by
turning the programme selector to OFF.
If there is any break in the power supply while the machine is operating, a special memory stores the selected programme and, when the power is restored, it continues where it left OFF.
This button allows you to choose between three different options:
- EXTRA RINSE
! This option allows you to add one rinse at
the end of the washing cycle and is useful for people with delicate and sensitive skin, for which a small amount of detergent residue can cause irritations or allergies.
! It is advisable to also use this function for
the children clothes and for the washing of heavily soiled items, which requires a lot of detergent to be used, or for the washing of toweling items whose fibres mostly have the tendency to hold the detergent.
- HYGIENE +
Activated when you set 60°C of temperature. This option allows deep cleaning of your clothes by maintaining the same temperature for the whole wash.
- EASY IRON
This function allows you to minimizes creases as much as possible, eliminating the intermediate spins or reducing the intensity of the last one.
This button allows you to choose between two different options, depending on the selected programme.
- RAPID
The button becomes active when you select the RAPID (14/30/44 Min.) programme on the knob and allows you to select one of three durations indicated.
- STAIN LEVEL button
! Once the programme has been selected
the wash time set for that programme will be automatically shown.
! This option allows you to choose between
3 levels of wash intensity modifying the length of the programme, depending on how much the fabrics are soiled (can only be used on some programmes as shown in the table of programmes).
! This button allows you to change the
temperature of the wash cycles.
! It is not possible to raise the temperature
over the maximum allowed for the programme, in order to protect the fabrics.
! If you want carry out a cold wash all the
indicators must be off.
The option buttons should be selected before pressing the START/PAUSE button.
OPTIONS button
If an option is selected that is not compatible with the selected programme then the option indicator light first flashes and then goes off.
RAPID / STAIN LEVEL button
TEMPERATURE SELECTION button
EN
! By pressing this button, it is possible to
reduce the maximum speed, and if you wish, the spin cycle can be cancelled.
! If the label does not indicate specific
information, it is possible to use the maximum spin expected in the program.
! To reactivate the spin cycle press the
button until you reach the spin speed you would like to set.
! It is possible to modify the spin speed
without pausing the machine.
! Pressing simultaneously the buttons
TEMPERATURE SELECTION and SPIN SPEED for about 3 seconds, the
machine allows you to lock the keys. In this way, you can avoid making accidental or unwanted changes if a button on the display is pressed accidently during a cycle.
! The key lock can be simply cancelled by
pressing the two buttons simultaneously again or turning off the appliance.
The display’s indicator system allows you to be constantly informed about the status of the machine.
1
5
2 3 4 6 7
1) OPTIONS INDICATOR LIGHTS
The indicator lights show the options that can be selected by the relevant button.
2) CYCLE DURATION
! When a programme is selected the
display automatically shows the cycle duration, which can vary, depending on the options selected.
! During the initial filling phase of the cycle
the machine calculates the actual cycle time needed based on the load size, content and options selected. The real time of the wash will then be displayed. This time can recaulculate during the wash depending on detergent levels and load balancing.
3) DOOR LOCKED INDICATOR LIGHT
! The indicator light is illuminated when the
door is fully closed.
SPIN SPEED button
To prevent damage to the fabrics, it is not possible to increase the speed over the maximum allowed for the programme.
An over dosing of detergent can cause excessive foaming. If the appliance detects the presence of excessive foam, it may exclude the spinning phase or extend the duration of the program and increase water consumption.
The machine is fitted with a special electronic device, which prevents the spin cycle should the load be unbalanced. This reduces the noise and vibration in the machine and so prolongs the life of your machine.
KEY LOCK
Digital Display
Close the door BEFORE selecting the START/PAUSE button.
! When START/PAUSE is pressed on
the machine with the door closed, the indicator will flash momentarily and then illuminate.
! A special safety device prevents the door
from being opened immediately after the end of the cycle. Wait for 2 minutes after the wash cycle has finished and the DOOR LOCKED light has gone out before opening the door. At the end of the cycle turn the programme selector to OFF.
4) Kg Detector INDICATOR LIGHT (function active only on Cotton and Synthetics programmes)
! During the first minutes of the cycle, the
"Kg Detector" indicator will remain on while the intelligent sensor will weigh the laundry and adjust the cycle time, water and electricity consumption accordingly.
! Through every wash phase "Kg Detector"
allows to monitor information on the wash load in the drum and in the first minutes of the wash it:
- adjusts the amount of water required;
- determines the length of the wash cycle;
- controls rinsing according to the type of fabric selected to be washed it;
- adjusts the rhythm of drum rotation for the type of fabric being washed;
- recognises the presence of too much soap suds, and if necessary, adjust the amount of rinse water.
- adjusts the spin speed according to the load, thus avoiding any imbalance.
5) KEY LOCK INDICATOR LIGHT
The indicator light show that the keys are locked.
6) WASH TEMPERATURE INDICATOR LIGHTS
This show the washing temperature of the selected programme that can be changed (where allowed) by the relevant button. If you want carry out a cold wash all the indicators must be off.
7) SPIN SPEED INDICATOR LIGHTS
This show the spin speed of the selected programme, you can reduce or omit by the relevant button.
If the door is not properly closed, the light will continue to flash for about 7 seconds, after which the start command will be automatically cancelled. In this case, close the door in the proper way and press the START/PAUSE button.
EN
This appliance is equipped with Smart Touch technology that allows you to
interact, via the App, with smartphones based on Android operating system and equipped with NFC (Near Field Communication) function.
! Download on your smartphone the
Candy simply-Fi App.
FUNCTIONS
The main functions available using the App are:
! Voice Assistant – A guide to help you
choose the ideal cycle with only three voice inputs (clothes/fabrics, color, stain level).
! Cycles – To download and launch new
washing programmes.
! Smart Care – Smart Check-up and Auto-
Clean cycles and a troubleshooting guide.
! My Statistics – Washing statistics and
tips for a more efficient use of your machine.
HOW TO USE SMART TOUCH
FIRST TIME - Machine registration
! Enter the "Settings" menu of your
Android smartphone and activate the NFC function inside the "Wireless & Networks" menu.
! Turn the knob to the Smart Touch
position to enable the sensor on the dashboard.
! Open the App, create the user profile and
register the appliance following the instructions on the phone display or the
"Quick Guide" attached on the machine.
SMART TOUCH
The Candy simply-Fi App is available for devices running both Android and iOS, both for tablets and for smartphones. However, you can interact with the machine and take advantage of the potential offered by Smart Touch only with Android smartphones equipped with NFC technology, according to following functional scheme:
Android smartphone with NFC technology
Interaction with the machine + contents
Android smartphone without NFC technology
Contents only Android Tablet
Contents only
Apple iPhone
Contents only
Apple iPad
Contents only
Get all the details of the Smart Touch functions, browsing the App in DEMO mode or go to: www.candysmarttouch.com
Depending on the smartphone model and its Android OS version, the process of the NFC activation may be different. Refer to the smartphone manual for more details.
More information, F.A.Q. and the video for an easy registration are available on: www.candysmarttouch.com/how-to
NEXT TIME – Regular usage
! Every time you want to manage the
machine through the App, first you have to enable the Smart Touch mode by turning the knob to the Smart Touch indicator.
! Make sure you have unlocked your phone
(from stand-by mode) and you have activated the NFC function; then, follow the steps mentioned earlier.
! If you want to start a washing cycle, load
the laundry, the detergent and close the door.
! Select the desired function in the App
(e.g.: starting a programme, the Smart Check-up cycle, update statistics, etc).
! Follow the instructions on the phone
display, KEEPING IT ON the Smart Touch logo on the machine dashboard, when requested to do so by the App.
NOTES:
Place your smartphone so that the NFC antenna on its back matches the position of the Smart Touch logo on the appliance (as illustred below).
If you do not know the position of your NFC antenna, slightly move the smartphone in a circular motion over the Smart Touch logo until the App confirms the connection. In order for the data transfer to be successful, it is essential TO KEEP THE SMARTPHONE ON THE DASHBOARD DURING THESE THE FEW SECONDS OF THE PROCEDURE;
a message on the device will inform about the correct outcome of the operation and advise you when it is possible to move the smartphone away.
Thick cases or metallic stickers on your smartphone could affect or prevent the transmission of data between machine and telephone. If necessary, remove them.
The replacement of some components of the smartphone (e.g. back cover, battery, etc...) with non-original ones, could result in the NFC antenna removal, preventing the full use of the App.
The management and the control of the machine via App is only possible "by proximity": it is therefore not possible to perform remote operations (e.g.:
from
another room
; outside of the house).
EN
PROGRAMME
kg *
(MAX.)
TEMP.°C
1)
DETERGENT
Recommended
Max.
1 o 2
Whites
2)
5
5,5 6 6,5 7 8
60°
90°
( )
Cottons +
Prewash
2)
5
5,5 6 6,5 7 8
40°
60°
( )
EcoMix 20°
5
5,5 6 6,5 7 8
20°
20°
Cottons
**
2)
5
5,5 6 6,5 7 8
40°
60°
Synthetics
2)
3 3 3 3 3
3,5
40°
60°
Daily 59 Min.
2 2 2
2,5
2,5
2,5
60°
60°
14'
1 1 1 1 1
1,5
30°
30°
Rapid
3)
30'
1,5
1,5
1,5
1,5
1,5
2,5
30°
30°
44'
2 2 2 2 2,5
3
30°
40°
Rinse
- - - - -
-
-
-
Drain + Spin
- - - - -
-
- -
Delicates
2 2 2 2 2
2,5
40°
40°
Jeans
2)
3 3 3 3 3
3
40°
40°
Baby Care
2)
4 4 4 4 4
4,5
60°
60°
Wool
1 1 1 1 1
1,5
40°
40°
Hand Wash
1 1 1 1 1
1,5
30°
30°
Customizable setting that interacts with the App on your smartphone and to download the cycles (see the dedicated section). The factory sets the default programme Auto-Clean, which will sanitize the machine.
Table of programmes
Please read these notes:
* Maximum load capacity of dry clothes,
according to the model used (see control panel).
"
"
The spin speed may also be reduced, to match any guidelines suggested on the fabric label, or for very delicate fabrics cancel the spin completely this option is available with a spin speed button. This function can be activated with the button SPIN SELECTION. If the label does not indicate specific information, it is possible to use the maximum spin expected in the program. An over dosing of detergent can cause excessive foaming. If the appliance detects the presence of excessive foam, it may exclude the spinning phase or extend the duration of the program and increase water consumption.
( )
Only with PREWASH option selected (programmes with PREWASH option available).
1)
When a programme is selected, on the display is shown the display shows the recommended wash temperature that can be reduced (where allowed) by the relevant button.
2)
For the programmes shown you can adjust the duration and intensity of the wash using the STAIN LEVEL button.
3)
Selecting the RAPID program on the knob, it will be possible to select with the RAPID button, one of the three rapid programs available among 14’, 30’ and 44’.
! PREWASH: if the dispenser has the
specific compartment for pre-wash, pour the detergent in it. Otherwise, pour the detergent in the perforated area present on the drum, following the dosage indications of the detergent producer.
** STANDARD COTTON PROGRAMMES ACCORDING TO (EU) No 1015/2010 and No 1061/2010.
COTTON PROGRAMME WITH A TEMPERATURE OF 60°C.
COTTON PROGRAMME WITH A TEMPERATURE OF 40°C.
These programmes are suitable to clean normally soiled cotton laundry and they are the most efficient programmes in terms of combined energy and water consumptions for washing cotton laundry. These programmes have been developed to be compliant with the temperature on the wash label on the garments and the actual water temperature may slightly differ from the declared temperature of the cycle.
Before closing the cover and start the washing process, please check that the internal drum is perfectly closed. When possible, please align the position indicators with drum to assure the best washing performance.
IMPORTANT: do not use the pre-wash mode with start-delay option.
EN
To clean different types of fabrics and various levels of dirt, the washing machine has specific programs to meet every need of washing (see table of programmes).
Whites
An intensive wash. The final spin at maximum speed gives more efficient removal.
Cotton + Prewash
This programme has been designed to remove the stronger stains from cotton white clothes. The prewash guarantees the tough dirt removal. Add into compartment "1" a quantity of detergent equal to 20% of that used for main wash.
EcoMix 20°
This innovative programme, allows you to wash different fabrics and colours together, such as cottons, synthetics and mixed fabrics at only 20°C and provides an excellent cleaning performance. Consumption on this program is about 40% of a conventional 40°C. cottons wash.
Cottons
This program is suitable to clean normally soiled cotton laundry and it is the most efficient program in terms of combined energy and water consumptions for washing cotton laundry.
Synthetics
The washing and rinsing optimise the speed and rhythm of the drum action and water levels. The gentle spin, ensures a reduced formation of creases in the fabric.
Daily 59 Min.
This specially designed programme maintains the high quality wash performance whilst greatly reducing the wash time. The programme is designed for a reduced load (see table of programmes).
Rapid (14/30/44 Min.)
Washing cycle suggested for low loads and slightly dirty. With this program it is recommended to reduce the quantity of
detergent normally used, in order to avoid unnecessary waste. Selecting the RAPID program and acting on the button you can choose one of three programs available.
Rinse
This program performs 3 rinses with an intermediate spin (which can be reduced or excluded by using the appropriate button) . It is used for rinsing any type of fabric, for example after a wash carried out by hand.
Drain + Spin
The program completes the drain and a maximum spin. It is possible to delete or reduce the spin with the SPIN SPEED button.
Delicates
This program has reduced periods of drum rotation during the cycle and is particularly suitable or washing delicate fabrics. The wash cycle and rinses are carried out with a high level of water to ensure the best performance.
Jeans
This program has been designed to have the highest quality cleaning of fabrics such as denim: ideal for removing dirt without affecting the elasticity of the fibers.
Baby Care
This program allows you to wash all baby clothes getting a perfect clean and sanitizing effect, setting the temperature at 60°C minimum. To optimize the result of the sanitizing effect we recommend the use of powder detergent.
Wool
This program performs a wash cycle dedicated to the wool fabrics that can be washed in a washing machine, or the articles to be washed by hand.
Hand Wash
Program for hand wash only clothes, the program ends with 3 rinses and a slow spin.
Programmes selection
Smart Touch
Customizable setting of the knob that you have to select when you would like to transfer a command from the App to the machine and to download/start a cycle (see the dedicated section and the user manual of the App for more info). In the Smart Touch option the factory sets as a default the "Auto-Clean" cycle, made
to clean the drum, remove bad smells and extend the life of the washing machine. Make sure there is no load in the drum before starting the "Auto-Clean" cycle, use a proprietary washing machine cleaning agent or powder detergent. Leave the door of the machine open at the end of the cycle to allow the drum to dry. Recommended every 50 washes.
EN
Opening/ closing the drum
! Open the washing machine lid.
! Open the drum by pressing the (A) button
with one hand while pressing down on the opposite door with the other.
! Place clothes in the drum one item at a
time, and without squashing. Do not exceed the load limits recommended in the “programme table”. An overloaded washing machine will not wash properly, and will leave clothing wrinkled.
! To close the drum, place the doors so
that the one with the (A) button is below the other and they fit together perfectly.
Detergent load
The detergent dispenser is divided into 3 compartments:
! Compartment 1
is for powder detergent
.
!
Compartment 2
is for liquid detergent.
! The compartment is for fabric
conditioners, scenting agents and special additives such as starch, blueing, etc.
! MAX - on the detergent case is underlined
the maximum level of detergent to be used. Do not exceed this level.
! When the clothes present stains that
need treatment with bleaches liquids products, you can proceed to their preliminary cleaning in the washing machine. For that: Introduce the bleach product in the "compartment 2", and set
the rinse program . Once finished the treatment set the programmer to the OFF position, add the rest of the laundry, and proceed to the normal washing with the wanted program.
1) Maximum Main wash washing powder
2) Maximum Main wash washing liquid
3) Maximum scenting agent
Preparing the wash
7. THROUBLESHOOTING AND WARRANTY
If you believe the washing machine is not working correctly, consult the quick guide provided below which includes some practical tips on how to fix the most common problems.
ERROR CODE FORMAT
Error shown
Possible causes and practical solutions
E2 (with display) 2 flashes of the LEDs (without display)
The machine cannot load water.
Make sure the water supply tap is open.
Make sure the water supply hose isn’t bent, kinked or trapped.
Make sure the drain pipe is at the proper height (see installation section).
Close the water supply tap, unscrew the filler hose from the back of the washing machine and make sure the “anti-sand” filter is clean and not blocked.
E3 (with display) 3 flashes of the LEDs (without display)
The washing machine does not drain water.
Make sure the filter is not clogged.
Make sure the drain hose isn’t bent, kinked or trapped.
Make sure the home drainage system is not blocked and is allowing water to flow through without obstruction. Try to drain the water in the sink.
E4 (with display) 4 flashes of the LEDs (without display)
There is too much foam and/or water.
Ensure the correct amount of detergent is being used and the detergent is designed for use in a washing machine.
E7 (with display) 7 flashes of the LEDs (without display)
Door problem.
Make sure the door is correctly closed. Make sure the clothes inside the drum are not preventing the door from closing fully.
If the door is locked, turn off and unplug the washing machine from the electrical supply socket, wait 2-3 minutes and reopen the door.
Any other code
Turn off and unplug the washing machine, wait a minute. Turn on the machine and restart a program. If the error occurs again contact an Authorised Customer Service Centre directly.
FOR SMART TOUCH MODELS
The Candy simply-Fi app has a Smart Check-up function that allows you to confirm the functionality and status of the product at any time. To use the Candy simply-Fi app you will need an Android smartphone with NFC technology. More info can be found on the App. If the display of the machine is showing an error (by a code or blinking LEDs), you should turn on the App on your Android smartphone, with NFC on. Place your smart phone against the Smart Touch logo on the control panel. You should now be able to read the fault directory to solve the issue.
! Models with a display: the error is shown by a number preceded by the letter “E”
(example: E2 = Error 2).
! Models without display: an error is shown by a sequence of flashes of every LED.
The error code is shown by the number of flashes followed by a pause of 5 seconds (example: two flashes – pause 5 seconds – two flashes – repeating = Error 2).
EN
OTHER ANOMALIES
Problem
Possible causes and practical solutions
The washing machine does not work / start
Make sure the product is plugged into a working supply socket.
Make sure power is on.
Make sure the wall socket is working, testing it with another appliance such as a lamp.
The door may not be correctly closed: open and close it again.
Check whether the required program was correctly selected and the start button pressed.
Make sure the washing machine is not in pause or time delay mode.
Water leaked on the floor near the washing machine
This may be due to a leak from the seal between the tap, supply hose and fill valve; in this case, replace it and tighten the hose connections correctly.
Make sure the front filter is correctly closed.
The washing machine does not spin
The machine is fitted with a detection system that protects the load and product from damage if the load is not balanced before spinning. This may result in:-
The machine attempts to balance the load, increasing the time of spin.
Reduction of the speed of spin to decrease vibrations and noise.
The spin cycle aborting to protect the machine and load.
If this is experienced remove the load de-tangle it, reload it and restart the spin program.
This could be due to the fact that water has not been completely drained: wait a few minutes. If the problem persists, see Error 3 section.
Some models include a "no spin" function: make sure it is not selected.
Check which options are selected and their effect on the spin cycle.
Excessive detergent can impede the spin cycle, ensure the correct amount of detergent is being used.
Strong vibrations / noises are heard during the spin cycle
The washing machine may not be fully levelled: if necessary, adjust the feet as indicated in the specific section.
Make sure transport screws, rubber bungs and spacer tubes were removed.
Make sure there are no foreign objects inside the drum (coins, hinges, buttons, etc).
The standard manufacturer warranty covers faults caused by electrical or mechanical faults in the product due to an act or omission of the manufacturer. If a fault is found to be caused by factors outside the product supplied, miss-use or as a result of the instructions on use not being followed, a charge may be applied.
The use of ecological detergents without phosphates may cause the following effects:
- cloudier rinse drain water: This effect is
tied to the suspended zeolites which do not have negative effects on rinse efficiency.
- white powder (zeolites) on laundry at the end of the wash: this is normal, the powder is not absorbed by fabric and does not change its colour. To remove the zeolites, select a rinse programme. In the future consider using slightly less detergent.
- foam in the water at last rinse: this does not necessary indicate poor rinsing. Consider using less detergent in future washes.
- abundant foam: This is often due to the anionic surfactants found in the detergents which are hard to eliminate from laundry.
In this case, do not re-rinse to eliminate
these effects: it will not help at all. We suggest conducting a maintenance wash using a proprietary cleaner.
If the problem persists or if you suspect a malfunction, immediately contact an Authorised Customer Service Centre.
It is always recommended to use original spare parts, that are available at our Authorised Customer Service Centres.
The manufacturer declines all responsibility for any printing errors in the booklet included with this product. Moreover, it also reserves the right to make any changes deemed useful to its products without changing their essential characteristics.
Warranty
The product is guaranteed under the terms and conditions stated on the certificate included with the product. The warranty certificate must be duly filled in and stored, so as to be shown to the Authorised Customer Service Centre in case of need. Proof of purchase must be made available at the time of any warranty related repair.
2
Tak fordi du har valgt en Candy­vaskemaskine. Vi er overbeviste om, at den på loyal vis vil hjælpe dig med at vaske dit tøj sikkert, endda det sarte, dag efter dag.
Læs omhyggeligt denne manual for korrekt og sikker anvendelse og for hjælpsomme tips om effektiv vedligeholdelse.
Brug kun vaskemaskinen efter du omhyggeligt har læst disse instruktioner. Vi anbefaler, at du holder denne manual klar ved hånden og i god stand til mulige fremtidige ejere.
Tjek venligst om apparatet leveres med denne brugermanual, garantibevis
, servicecenteradresse og energimærke. Tjek også at stik, holder til afløbsslange og bakker til flydende vaskemiddel eller blegemiddel (kun visse modeller) er inkluderet. Vi anbefaler, at du beholder alle disse komponenter.
Hvert produkt er identificeret med en unik 16­cifret kode, også kaldet "serienummer", som står klistermærket bagsiden af apparatet (ved åbningen) eller i dokumentkuverten indeni produktet. Denne kode er et slags specifikt produkt-ID-kort, som du skal bruge for registrere det, og hvis du kontakter Candy-servicecenter.
Dette apparat er mærket i henhold til det europæiske direktiv 2012/19/EU om affald af elektrisk og elektronisk udstyr (WEEE).
Affald af elektrisk og elektronisk udstyr (WEEE) indeholder både forurenende dele (som kan have negative konsekvenser for miljøet) og grundkomponenter (som kan genanvendes). Det er vigtigt at underlægge affald af elektrisk og elektronisk udstyr (WEEE) specifikke behandlinger for at fjerne og skaffe sig af med alle forureningskilder på den rigtige måde og udvinde og genbruge alle materialer.
Det enkelte individ kan spille en vigtig rolle i at sikre, at affald af elektrisk og elektronisk udstyr (WEEE) ikke bliver et miljømæssigt problem; det er altafgørende, at følge nogle grundlæggende regler:
! affald af elektrisk og elektronisk udstyr
(WEEE) må ikke behandles som husholdningsaffald.
! affald af elektrisk og elektronisk udstyr
(WEEE) skal afleveres til det relevante indsamlingssted, som administreres af kommunen eller registrerede firmaer. Der findes i mange lande afhentning ved husstanden af store affald af elektrisk og elektronisk udstyr (WEEE)-produkter.
Når du køber et nyt apparat, er det i mange lande således, at det gamle apparat kan returneres til forhandleren, som skal hente det gratis fra gang til gang, så længe apparatet er en lignende type og har de samme funktioner, som det leverede apparat.
1. GENERELLE SIKKERHEDSREGLER
2. MONTERING
3. PRAKTISKE TIPS
4. VEDLIGEHOLDELSE OG RENGØRING
5. KVIKBRUGERGUIDE
6. STYRING OG PROGRAMMER
7. KUNDESERVICECENTER OG GARANTI
Miljøbetingelser
Indhold
DA
3
1. GENERELLE SIKKERHEDSREGLER
! Hensigten med dette apparat er, at
det bruges til husholdningsformål eller lignende såsom:
Personalekøkkenområder i butikker, kontorer og andre arbejdsmiljøer;
Stuehuse;
Af klienter på hoteller, moteller
og andre lignende boligmiljø;
Bed & breakfast-miljøer.
Anden brug af dette apparat end i husholdningsmiljø eller til typiske
husholdningsformål, som kommerciel brug af eksperter eller trænede brugere, udelukkes, selv ved de ovennævnte anvendelser. Hvis dette apparat anvendes på en måde, ikke i overensstemmelse med dette, kan det reducere apparatets levetid og annullere producentens garanti. Ethvert ansvar for skade på apparatet eller anden skade eller tab i forbindelse med brug, der ikke er i overensstemmelse med hjemlig eller husholdningsbrug (selv hvis apparatet befinder sig i et hjemme­eller husholdningsmiljø), vil ikke blive accepteret af producenten, i fuld overensstemmelse med gældende lovgivning.
! Dette apparat kan bruges af børn
fra 8 år og op, og af personer med reduceret fysiske, sansende eller mentale evner, eller manglende
erfaring og viden, hvis de er under opsyn eller gives instruktioner angående brugen af apparatet på en sikker måde og forstår de medfølgende risici. Børn må ikke lege med apparatet. Rengøring og vedligeholdelse må ikke udføres af børn uden opsyn.
! Børn bør være under opsyn for
at sikre, at de ikke leger med apparatet.
! Børn under 3 år bør holdes
væk, medmindre de er under konstant opsyn.
!
Hvis ledningen er skadet, skal den udskiftes af producenten, dens servicerepræsentant eller lignende kvalificeret personale, for at undgå fare.
!
Brug kun de medfølgende slanger til vandforsyning stilslutningen (genbrug ikke gamle slanger).
!
Vandtrykket skal være mellem 0,05 MPa og 0,8 MPa.
! Vær sikker på, at et tæppe ikke
blokerer maskinens bund og ventilationsåbningerne.
! Tilstanden SLUKKET opnås ved at
indstille referencemarkøren på programstyringen/knappen i den vertikale position. Enhver anden position af denne styring sætter maskinen i tilstanden TÆNDT (kun for modeller med programvælgere).
4
!
Efter montering skal apparatet placeres således at stikket er tilgængeligt.
!
Maks. kapacitet for tørt tøj afhænger af den brugte model (se kontrolpanel).
! For at se apparatets bilagskort
refereres der til producentens hjemmeside.
!
Før rengøring og vedligeholdelse af maskinen, skal stikket tages ud og vandhanen lukkes.
! Vær sikker på, at det elektriske
system har jordforbindelse. Hvis ikke, så søg professionel assistance.
! Brug venligst ikke omformere,
stikdåser eller forlængerledninger.
! Træk ikke i ledningen eller
apparatet for at trække maskinens stik ud.
! Udsæt ikke vaskemaskinen for
regn, direkte sollys eller andet vejr.
!
I tilfælde af defekt og/eller funktionsfejl, så sluk for vaskemaskinen, luk for vandhanen og pil ikke ved apparatet. Tag omgående kontakt til kundeservicecenteret og brug kun originale reservedele. Undladelse af at følge disse instruktioner kan udgøre risici for apparatets sikkerhed.
Apparatet er i overensstemmelse med følgende europæiske direktiver:
! 2006/95/EC (LVD); ! 2004/108/EC (EMC); ! 2009/125/EC (ErP); ! 2011/65/EU (RoHS);
og efterfølgende ændringer.
Sikkerhedsinstruktioner
ADVARSEL: vandet kan nå meget høje temperaturer under vask.
DA
5
2. MONTERING
1
! De 4 skruer, "A", løsnes på
begge
vinkelbeslag og ligeledes
de 4 skruer, "B". (figur 1).
!
De 4 skruer, "A", anbringes igen og de
vedlagte pyntekapsler
monteres, "C" (figur 2).
3
4
min 50 cm max 85 cm
+2,6 mt
max
max 100 cm
min 4 cm
5
! Vaskemaskinen bør tilsluttes
vandindtagelseshanen med den nye vandledning, som leveres vedlagt apparatet, (indeni tromlen). Brug IKKE den gamle vandledning til dette formål.
!
Vandindtagelsesledningen forbindes i den ene ende, den med bøjningen, til elektroventilen, (der sidder øverst bagpå maskinen) og i den aden ende til en vandhane eller vandindtagelsestap, med skruemundstykke på 3/4" gas.
!
Vaskemaskinen nærmes væggen, idet der sørges for, at ledningen ikke danner bøjninger eller knuder undervejs, og vandudledningsslangen fastgøres til vaskekummens kant eller såfremt det er muligt forbindes slangen til et fast installeret vandudløb/kloak, der har en større diameter end
vaskemaskinens vandudledningsrør, med en minimumshøjde fra 50 cm og en maksimumhøjde på 75 cm fra gulvet (figur 4).
! Hvis det er nødvendigt, bruges det
rundformede stykke tilbehør til at fastholde og støtte vandudledningsrøret.
Såfremt Deres model måtte være forsynet dermed:
! For nemt at kunne flytte
vaskemaskinen, drejes understellets styrestang mod højre. Efter denne operation, anbringes styrestangen atter i dens oprindelige position.
! Vaskemaskinen højdereguleres og
indstilles vandret ved at drje på dens forreste fødder (figur 5). a) Møtrikken drejes med urets visere for at deblokere fodens skrue. b)
Der drejes på foden, og den hæves eller sænkes, indtil den berører gulvet med hele dens overflade. c) Foden blokeres og fastgøres ved at dreje møtrikken imod urets visere, indtil den rører ved vaskemaskinens bund.
! Kontroller venligst, at apparatet er
fuldstændigt vandret indstillet.
! For at udføre denne kontrol, forsøges
det at bevæge vaskemaskinen uden at flytte den, ved skiftevis at støtte sig til diagonalernes yderpunkter øverst på vaskemaskinen og det kontrolleres, at apparatet ikke vipper.
! Hvis vaskemaskinen flytter sig, skal
dens fødder atter højdereguleres, (indstilles vandret).
Loading...
+ 66 hidden pages