Candy CDIH 1L952, CDIH 1L949, CDIH 2L1047, CDIH 1D952, CDIH 2D949 User Manual
...
User Manual
Dishwasher
CDIH 1L952／CDIH 1L949
CDIH 2L1047
CDIH 1D952/CDIH 2D949
CDIH 2T1047
Thank you for purchasing a Candy product
Please read these instructions ca re fu ll y before using this a pp lian ce. The
instructions contain important information which will help you get the best out of the
appliance and ensure safe and proper installation, use and maintenance.
Keep this manual in a convenient place so you can always refer to it for the safe
and proper use of the appliance.
If you sell the appliance, give it away, or leave it behind when you move house,
make sure you also pass on this manual so that the new owner can become
familiar with the appliance and safety warnings.
Content
Safety and warnings ......................................................................................
Installation instructions ..................................................................................
Product Description .......................................................................................
Overview of programmes...............................................................................
Water softening system.................................................................................
Using rinse aid...............................................................................................
Utensils..........................................................................................................
Loading utensils.............................................................................................
Adding detergent............................................................................................
Before first Use..............................................................................................
Daily Use........................................................................................................
Care and cleaning..........................................................................................
Troubleshooting.............................................................................................
Technical Data...............................................................................................
1
4
21
22
25
27
28
29
32
33
35
37
40
44
Safety and warnings
Your dishwasher has been carefully designed to operate safely during normal
dishwashing procedures. Please keep the following instructions in mind when you
are using your dishwasher.
WARNING
Before installing the dishwasher, remove the house fuse or open the circuit breaker.
This appliance must be earthed. In the event of a malfunction or breakdown,
earthing will reduce the risk of electric shock by providing a path of least resistance
for electric current. This appliance is equipped with a cord having an equipmentearthing conductor and an earthing plug. The plug must be plugged into an
appropriate outlet that is installed and earthed in accordance with all local codes
and ordinances.
WARNING - Improper connection of the equipment-earthing conductor can result in
a risk of electric shock. Check with a qualified electrician or service representative
if you are in doubt as to whether the appliance is properly earthed.
Do not modify the power supply plug provided with the appliance - if it will not fit
the outlet, have a proper outlet installed by a qualified electrician. Do not use an
extension cord, adapter plug or multiple outlet box.
Failure to follow this advice may result in electrical shock or death.
WARNING
Take care - panel edges are sharp.
Failure to use caution could result in injury or cuts.
WARNING
Electrical shock hazard
Cut Hazard
When using your dishwasher, follow basic
precautions, including the following:
● Read all instructions before using the dishwasher.
● The information in this manual must be followed to minimise the risk of fire or
explosion or to prevent property damage, personal injury or loss of life.
● Use the dishwasher only for its intended function as described in this user guide.
● This appliance is intended to be used in household and similar applications such
as:
– staff kitchen areas in shops, offices and other working environments;
– farm houses;
– by clients in hotels, motels and other residential type environments;
– bed and breakfast type environments.
1
Safety and warnings
● Use only detergents or rinse aid recommended for use in a domestic dishwasher
and keep them out of reach of children.
● Check that the detergent dispenser is empty after the completion of each wash
program.
● When loading items to be washed, locate sharp items so that they are not likely
to damage the dishwasher and load sharp knives with the handle up to reduce the
risk of cut-type injuries.
● Do not touch the filter plate (the metal disc in the dishwasher base) during or
immediately after use, as it may be hot from the heater plate underneath.
● Do not tamper with the controls.
● Do not abuse, sit in, stand on the door or dish rack of the dishwasher.
● Do not lean on the adjustable racks or use them to support your body weight.
● To reduce the risk of injury, do not allow children to play in or on the dishwasher.
● Under certain conditions, hydrogen gas may be produced in a hot water heater
system that
If the hot water system has not been used for such a period, before using the
dishwasher, turn on all hot water taps and let the water flow from each for several
minutes. This will release any accumulated hydrogen gas. As the gas is flammable,
do not smoke or use an open flame during this time.
● Remove the door to the washing compartment when removing an old dishwasher
from service or discarding it.
● Some dishwasher deterge
dangerous if swallowed. Avoid contact with the skin and eyes and keep children
away from the dishwasher when the door is open. Check that the detergent
receptacle is empty after completion of the wash cycle.
● Cert ifi ed resi den t ial dish was hers are not inte nde d f or lice nse d fo o d
establishments.
has not been used for two weeks or more. Hydrogen gas is explosive.
nts are strongly alkaline. They can be extremely
Maintenance safety instructions
● Disconnect t he appliance from the power supply before any cleaning or
maintenance.
● When disconnecting the appliance，pull the plug rather than the power supply
cord or junction of cord to avoid damage.
● Do not repair or replace any part of the appliance or attempt any servicing unless
specifically recommended in this user guide.
● Keep the floor around your appliance clean and dry to reduce the possibility of
slipping.
2
safety and warnings
● Keep the area around/underneath your appliance free from the accumulation of
combustible materials, such as lint, paper, rags and chemicals.
Operational safety instructions
● Open the door very carefully if the dishwasher is in operation. There is a risk of
being sprayed with hot water. Do not open the door fully until the spray arms have
stopped rotating.
● The door should not be left in the open position as this could present a tripping
hazard.
● The water inside the dishwasher is not suitable for drinking.
● The dishwasher must be used with the filter plate, drain filter and spray arm(s) in
place. To identify what these parts are, see drawings in section ‘‘Care and Cleaning’
of this user guide.
● Do not operate this dishwasher if it is damaged, malfunctioning, partially
disassembled or has missing or broken parts, including a damaged power supply
cord or plug.
● Household appliances are not intended to be played with by children. Children of
less than 8 years old must be kept away from the appliance unless continuously
supervised. This appliance can be used by children aged from 8 years and
above, and persons with reduced physical, sensory or mental capabilities or lack
of experience and knowledge, if they have been
concerning the use of the appliance in a safe way and they understand the hazards
involved.
● Cleaning and user maintenance shall not be done by children without supervision.
● Do not allow children to play inside, on or with this appliance or any discarded
appliance.
● If a dishwasher cleaner is used, we would strongly recommend a wash program
with detergent should be run immediately afterward, to prevent any damage to the
dishwasher.
● The dishwasher is designed for washing normal household utensils. Items that
are contaminated by petrol, paint, steel or iron debris, corrosive, acidic or alkaline
chemicals are not to be washed in the dishwasher.
● If the dishwasher is not being used for long periods of time, turn the electricity
and water supply to the dishwasher off.
given supervision or instruction
3
Installation instructions
Parts supplied
Drain hose
suppo rt (1 )
Moist ure p rotec tion
tape (1) ( to pr eve nt
moist ure d amage to
cabin etry)
Inlet hos e (1)
Install ing the
fixing s
Brack ets f or
toeki ck (2 )Hex k ey (1 )
(2)
Installat ion and
User Inst ructions
Salt funnel
Plastic
spacers ( 2)
Ø3.5 x 13mm
screws (10)
Ø4 x 25mm
screw s (4)
Ø3.5 x 44mm
screws (4)
Prior to installation
Unpacking and handling
● Check packagin g and dishwasher for signs of t ransport damage. If t he
dishwasher is in any way damaged, do not install it. Contact the dealer the
dishwasher was purchased from.
● Disposal of packaging: some of the packaging is recyclable. Check the symbols
and labels and recycle if possible.
● Never lift the dishwasher from the door handle or the top panel. Doing so may
cause damage.
● Always be careful with the hoses and power cord at the back of the dishwasher.
Careful handling will prevent damage and malfunction from squashing, kinking or cuts.
● While installing the dishwasher, check the drain hose is not restricted or kinked.
Connections and services
● Check that the power cord is long enough to reach the outlet. If it isn’t, it must be
replaced by a haie
boards should not be used to connect the dishwasher to the power supply.
● Check that the hoses are long enough to reach the services. If a hose needs
extending, ensure that the extension hose is new and of equal quality and diameter
r authorised technician. Extension cords or multi-outlet power
● The dishwa sh er should not be conne ct ed to a water system where th e
temperature exceeds 60
o
C.
● The dishwasher must not be connected to an undersink high-pressure “pushthrough” type hot water system, as damage to the system will result.
4
Product dimensions
1
Installation instructions
B
A
e
D
h
3.5-5kg
g
C
i
F
j
k
5
Installation instructions
A Overall height of product* 816 - 876
B Overall width of product
C Overall depth of product
D Depth of toekick 30 - 95
E Height from floor to bottom of custom panel 100 - 153
F Depth of open door
(measured from front of chassis) (excl. custom panel)
* depending on adjustment of levelling feet
(excl. side seals)
(excl. custom panel & handle)
MM SNOISNEMID TCUDORP
448
559
606
CUSTOM PANEL DIMENSIONS
G Height of custom door panel 660 - 713
I Depth of custom door panel 16 - 20
* depending on cabinetry dimensions
Cabinetry dimensions
2
(custom made)
***lenap kcikeot motsuc fo thgieHK
L
N
75
MM
444lenap rood motsuc fo htdiWH
444
lenap kcikeot motsuc fo htdiWJ
140 -
PLAN
6
L
M
N
* depending on adjustment of levelling feet
Minimum clearances from adjacent cabinetry
Installation instructions
PROFILE
M
MM SNOISNEMID YRTENIBAC
452ytivac fo htdiw edisnI
818 - 878*ytivac fo thgieh edisnI
775 .nimytivac fo htped edisnI
min. 13 mm
clearance
from a corner
cupboard
min. 1 mm
clearance
to adjacent
cupboard door
7
Installation instructions
Cavity preparation
3
IMPORTANT!
To prevent possible steam damage to the cabinetry, ensure that any bare wood surrounding
the dishwasher is sealed with an oil-based paint or moisture-proof polyurethane.
1
Apply moisture protection
tape to the underside
of the benchtop.
4
Back foot of the
dishwasher can be
adjusted by using
a 6mm Allen key
(not supplied)
2
Front feet of
dishwasher can
be adjusted as
shown
3
Services can be located either
side of the dishwasher.
Ensure that any services hole has
a minimum diameter of 50mm.
Dia. 50mm
IMPORTANT!
The power outlet must be located
in a cabinet adjacent to the
Positioning and stabilising the dishwasher
Do not lift the dishwasher from the door handle.
As you push product in, pull through hoses and cord, ensuring they don’t get kinked or twisted.
Plastic spacers can now be inserted at the side of the dishwasher next to the hinge to improve
stabilitysee step 7 for details on fitting spacers
After sliding the dishwasher into position, adjust back foot with a 6mm Allen key.
The front feet can be adjusted manually also.
We recommend that you adjust the feet so that the dishwasher sits securely under the
bench top so that it doesn’t tip.
8
dishwasher cavity.
Installation instructions
Custom door panel preparation
4
Front panel material specifications
The front of the dishwasher can be fitted with a front panel with the following specifications:
Adequately sealed to withstand moisture (50°C @ 80% RH). Because of it being a hot and wet
environment generally, the back and sides of the panel should be completely sealed with a
waterproof vapor barrier (ie polyurethane) to prevent damage to the panel.
9
5
2 mm
Attaching custom door panel
Installation instructions
1
Insert Ø3.5 x 13mm
screws through pilot
holes and attach the
small slider bracket
to panel.
2
Close the door of the
dishwasher, then hang
the custom panel onto
the front of the door.
10
Installation instructions
Open the door and remove
screws before replacing
them with Ø3.5 x 44mm
screws to fix panel into
place.
4
[08] X4
(3.5x44
m m)
Adjust the placement of
the door to the correct
position.
3
Door balancing
The door balance can be
adjusted via two screws
accessed through two
holes at the front.Adjust
both sides at the same
time, alternating between
the sides so that even
balance is achieved.
5
IMPORTANT!
Adjust these using the
SUPPLIED HEX KEY
2 mm
12 mm
ONLY until the door just
remains open under its
own weight.
11
6
Toe kick installation
Separate panel
153
100
Installation instructions
180.9 Centre
A
1
Mark out the pilot hole locations for each
bracket. To establish the height in which
the bracket will be fixed, measure the
distance from the floor to the lowest hole
of the bracket. Remove bracket from the
product and plot the location of the other
A
holes relative to this measurement. Note
door overhang and swing range.
30
Fix brackets to panel using Ø3.5 x 13mm
screws. Insert toekick into product and
mark the desired alignment depth on
the bracket. Remove panel. Using a
screwdriver, bend the marked tabs out
on both brackets to prevent toekick from
receding into product further.
65
toekick depth range
12
2
3
4
Slide toe kick firmly into
the spaces on either side
of the chasis to attach.
Installation instructions
Continuous panel
1
Note door overhang and swing range
relative to height and depth of toekick
panel. As the panel is continuous, cutting
back panel is likely to be necessary to
ensure seamless integration.
153
100
A
30
65
toekick depth range
2
Align the toekick to desired position and
mark out the point in which the toekick
meets the base of the door panel. Cut
back excess.
IMPORTANT!
Toe kick can protrude no more than
90mm out from the dishwasher to
ensure that the visibility of the floor
light is not obstructed.
3
Fit continuous panel to
surrounding cabinetry
13
Securing product
7
Centre product
Installation instructions
Plastic spacers can be
cut to size then taped
to the sides of the
dishwasher to improve
overall stability.
cut path
example
It is recommended that
the spacers are placed
on both sides near
the hinges in identical
positions.
As you push product
in, pull through hoses
and cord, ensuring
they don’t get kinked
or twisted.
14
IMPORTANT!
Ensure top of door is installed flush
with surrounding cabnetry
Loading...