Candy CDIH 1L952, CDIH 1L949, CDIH 2L1047, CDIH 1D952, CDIH 2D949 User Manual

User Manual

Dishwasher

CDIH 1L952/CDIH 1L949

CDIH 2L1047

CDIH 1D952/CDIH 2D949 CDIH 2T1047

Thank you for purchasing a Candy product

Please read these instructions carefully before using this appliance. The instructions contain important information which will help you get the best out of the appliance and ensure safe and proper installation, use and maintenance.

Keep this manual in a convenient place so you can always refer to it for the safe and proper use of the appliance.

If you sell the appliance, give it away, or leave it behind when you move house, make sure you also pass on this manual so that the new owner can become familiar with the appliance and safety warnings.

Content
Safety and warnings ......................................................................................	1
Installation instructions ..................................................................................	4
Product Description .......................................................................................	21
Overview of programmes...............................................................................	22
Water softening system.................................................................................	25
Using rinse aid...............................................................................................	27
Utensils..........................................................................................................	28
Loading utensils.............................................................................................	29
Adding detergent............................................................................................	32
Before first Use..............................................................................................	33
Daily Use........................................................................................................	35
Care and cleaning..........................................................................................	37
Troubleshooting.............................................................................................	40
Technical Data...............................................................................................	44

Safety and warnings

Your dishwasher has been carefully designed to operate safely during normal dishwashing procedures. Please keep the following instructions in mind when you are using your dishwasher.

WARNING Electrical shock hazard

Before installing the dishwasher, remove the house fuse or open the circuit breaker. This appliance must be earthed. In the event of a malfunction or breakdown, earthing will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipmentearthing conductor and an earthing plug. The plug must be plugged into an appropriate outlet that is installed and earthed in accordance with all local codes and ordinances.

WARNING - Improper connection of the equipment-earthing conductor can result in a risk of electric shock. Check with a qualified electrician or service representative if you are in doubt as to whether the appliance is properly earthed.

Do not modify the power supply plug provided with the appliance - if it will not fit the outlet, have a proper outlet installed by a qualified electrician. Do not use an extension cord, adapter plug or multiple outlet box.

Failure to follow this advice may result in electrical shock or death.

WARNING Cut Hazard

Take care - panel edges are sharp.

Failure to use caution could result in injury or cuts.

		When using your dishwasher, follow basic
	WARNING
		precautions, including the following:

●Read all instructions before using the dishwasher.

●The information in this manual must be followed to minimise the risk of fire or explosion or to prevent property damage, personal injury or loss of life.

●Use the dishwasher only for its intended function as described in this user guide.

●This appliance is intended to be used in household and similar applications such as:

–staff kitchen areas in shops, offices and other working environments;

–farm houses;

–by clients in hotels, motels and other residential type environments;

–bed and breakfast type environments.

1

Safety and warnings

●Use only detergents or rinse aid recommended for use in a domestic dishwasher and keep them out of reach of children.

●Check that the detergent dispenser is empty after the completion of each wash program.

●When loading items to be washed, locate sharp items so that they are not likely to damage the dishwasher and load sharp knives with the handle up to reduce the risk of cut-type injuries.

●Do not touch the filter plate (the metal disc in the dishwasher base) during or immediately after use, as it may be hot from the heater plate underneath.

●Do not tamper with the controls.

●Do not abuse, sit in, stand on the door or dish rack of the dishwasher.

●Do not lean on the adjustable racks or use them to support your body weight.

●To reduce the risk of injury, do not allow children to play in or on the dishwasher.

●Under certain conditions, hydrogen gas may be produced in a hot water heater

system that has not been used for two weeks or more. Hydrogen gas is explosive. If the hot water system has not been used for such a period, before using the

dishwasher, turn on all hot water taps and let the water flow from each for several minutes. This will release any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame during this time.

●Remove the door to the washing compartment when removing an old dishwasher from service or discarding it.

●Some dishwasher detergents are strongly alkaline. They can be extremely dangerous if swallowed. Avoid contact with the skin and eyes and keep children away from the dishwasher when the door is open. Check that the detergent receptacle is empty after completion of the wash cycle.

●Certified residential dishwashers are not intended for licensed food establishments.

Maintenance safety instructions

●Disconnect the appliance from the power supply before any cleaning or maintenance.

●When disconnecting the appliance pull the plug rather than the power supply cord or junction of cord to avoid damage.

●Do not repair or replace any part of the appliance or attempt any servicing unless specifically recommended in this user guide.

●Keep the floor around your appliance clean and dry to reduce the possibility of slipping.

2

safety and warnings

● Keep the area around/underneath your appliance free from the accumulation of combustible materials, such as lint, paper, rags and chemicals.

Operational safety instructions

●Open the door very carefully if the dishwasher is in operation. There is a risk of being sprayed with hot water. Do not open the door fully until the spray arms have stopped rotating.

●The door should not be left in the open position as this could present a tripping hazard.

●The water inside the dishwasher is not suitable for drinking.

●The dishwasher must be used with the filter plate, drain filter and spray arm(s) in place. To identify what these parts are, see drawings in section ‘‘Care and Cleaning’ of this user guide.

●Do not operate this dishwasher if it is damaged, malfunctioning, partially disassembled or has missing or broken parts, including a damaged power supply cord or plug.

●Household appliances are not intended to be played with by children. Children of less than 8 years old must be kept away from the appliance unless continuously supervised. This appliance can be used by children aged from 8 years and above, and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, if they have been given supervision or instruction concerning the use of the appliance in a safe way and they understand the hazards involved.

●Cleaning and user maintenance shall not be done by children without supervision.

●Do not allow children to play inside, on or with this appliance or any discarded appliance.

●If a dishwasher cleaner is used, we would strongly recommend a wash program with detergent should be run immediately afterward, to prevent any damage to the dishwasher.

●The dishwasher is designed for washing normal household utensils. Items that are contaminated by petrol, paint, steel or iron debris, corrosive, acidic or alkaline chemicals are not to be washed in the dishwasher.

●If the dishwasher is not being used for long periods of time, turn the electricity and water supply to the dishwasher off.

3

Installation instructions

Parts supplied

Drain hose	Inlet hose (1)	Installing the	Installation and	Plastic
support (1)		fixings (2)	User Instructions	spacers (2)
				Ø3.5 x 13mm
				screws (10)
				Ø4 x 25mm
				screws (4)
Moisture protection		Brackets for	Salt funnel	Ø3.5 x 44mm
tape (1) (to prevent				screws (4)
	Hex key (1)	toekick (2)
moisture damage to

cabinetry)

Prior to installation

Unpacking and handling

●Check packaging and dishwasher for signs of transport damage. If the dishwasher is in any way damaged, do not install it. Contact the dealer the dishwasher was purchased from.

●Disposal of packaging: some of the packaging is recyclable. Check the symbols and labels and recycle if possible.

●Never lift the dishwasher from the door handle or the top panel. Doing so may cause damage.

●Always be careful with the hoses and power cord at the back of the dishwasher. Careful handling will prevent damage and malfunction from squashing, kinking or cuts.

●While installing the dishwasher, check the drain hose is not restricted or kinked.

Connections and services

●Check that the power cord is long enough to reach the outlet. If it isn’t, it must be replaced by a haier authorised technician. Extension cords or multi-outlet power boards should not be used to connect the dishwasher to the power supply.

●Check that the hoses are long enough to reach the services. If a hose needs extending, ensure that the extension hose is new and of equal quality and diameter

●The dishwasher should not be connected to a water system where the temperature exceeds 60oC.

●The dishwasher must not be connected to an undersink high-pressure “pushthrough” type hot water system, as damage to the system will result.

4

Installation instructions

1 Product dimensions

B				C

A

e

D

h

3.5-5kg

g

i

F

j

k

5

Installation instructions

	PRODUCT DIMENSIONS				MM
	A Overall height of product*				816 - 876
	B	Overall width of product	(excl. side seals)		448
	C	Overall depth of product	(excl. custom panel & handle)	559
	D	Depth of toekick		30 - 95
	E	Height from floor to bottom of custom panel		100 - 153
	F	Depth of open door		606
		(measured from front of chassis) (excl. custom panel)
		* depending on adjustment of levelling feet

CUSTOM PANEL DIMENSIONS (custom made)			MM
G	Height of custom door panel	660 - 713
H	Width of custom door panel	444
I	Depth of custom door panel	16 - 20
J	Width of custom toekick panel	444
K	Height of custom toekick panel***	75 - 140
	* depending on cabinetry dimensions

2 Cabinetry dimensions

L

N

PLAN

6

	Installation instructions
	PROFILE
	M
CABINETRY DIMENSIONS	MM
L Inside width of cavity	452
M Inside height of cavity*	818 - 878
N Inside depth of cavity	min. 577
* depending on adjustment of levelling feet
Minimum clearances from adjacent cabinetry

min. 13 mm clearance from a corner cupboard

min. 1 mm clearance to adjacent

cupboard door

7

Installation instructions

3 Cavity preparation

IMPORTANT!

To prevent possible steam damage to the cabinetry, ensure that any bare wood surrounding the dishwasher is sealed with an oil-based paint or moisture-proof polyurethane.

1

Apply moisture protection tape to the underside of the benchtop.

Back foot of the dishwasher can be adjusted by using a 6mm Allen key

(not supplied)

2

3

Front feet of dishwasher can be adjusted as shown

Positioning and stabilising the dishwasher

4

Dia. 50mm

Services can be located either side of the dishwasher.

Ensure that any services hole has a minimum diameter of 50mm.

IMPORTANT!

The power outlet must be located in a cabinet adjacent to the dishwasher cavity.

Do not lift the dishwasher from the door handle.

As you push product in, pull through hoses and cord, ensuring they don’t get kinked or twisted. Plastic spacers can now be inserted at the side of the dishwasher next to the hinge to improve stabilitysee step 7 for details on fitting spacers

After sliding the dishwasher into position, adjust back foot with a 6mm Allen key. The front feet can be adjusted manually also.

We recommend that you adjust the feet so that the dishwasher sits securely under the bench top so that it doesn’t tip.

8

Installation instructions

4 Custom door panel preparation

Front panel material specifications

The front of the dishwasher can be fitted with a front panel with the following specifications:

Adequately sealed to withstand moisture (50°C @ 80% RH). Because of it being a hot and wet environment generally, the back and sides of the panel should be completely sealed with a waterproof vapor barrier (ie polyurethane) to prevent damage to the panel.

9

Installation instructions

5 Attaching custom door panel

2 mm

1

Insert Ø3.5 x 13mm screws through pilot holes and attach the small slider bracket to panel.

2

Close the door of the dishwasher, then hang the custom panel onto the front of the door.

10

Installation instructions

3

Open the door and remove screws before replacing them with Ø3.5 x 44mm screws to fix panel into place.

4

[08]X4

(3.5x44 m m)

2 mm

12 mm

Adjust the placement of the door to the correct position.

Door balancing

The door balance can be adjusted via two screws accessed through two holes at the front.Adjust both sides at the same time, alternating between the sides so that even balance is achieved.

5

IMPORTANT!

Adjust these using the SUPPLIED HEX KEY ONLY until the door just remains open under its own weight.

11

Installation instructions

6 Toe kick installation

Separate panel

180.9	Centre
A

1

Mark out the pilot hole locations for each

bracket. To establish the height in which

153

the bracket will be fixed, measure the

distance from the floor to the lowest hole

100

of the bracket. Remove bracket from the

product and plot the location of the other

A

holes relative to this measurement. Note

door overhang and swing range.

30

65

toekick depth range

Fix brackets to panel using Ø3.5 x 13mm

screws. Insert toekick into product and

2

mark the desired alignment depth on

the bracket. Remove panel. Using a

screwdriver, bend the marked tabs out

on both brackets to prevent toekick from

3

receding into product further.

4	Slide toe kick firmly into

the spaces on either side of the chasis to attach.

12

Installation instructions

Continuous panel

1

Note door overhang and swing range relative to height and depth of toekick panel. As the panel is continuous, cutting back panel is likely to be necessary to ensure seamless integration.

153

IMPORTANT!

Toe kick can protrude no more than

100

90mm out from the dishwasher to

A

ensure that the visibility of the floor

light is not obstructed.

30

65

toekick depth range

2

Align the toekick to desired position and mark out the point in which the toekick meets the base of the door panel. Cut back excess.

3

Fit continuous panel to surrounding cabinetry

13

Installation instructions

7 Securing product

As you push product in, pull through hoses and cord, ensuring they don’t get kinked or twisted.

	Plastic spacers can be
	cut to size then taped
	to the sides of the
	dishwasher to improve
	overall stability.
	cut path
	example
	It is recommended that
	the spacers are placed
	on both sides near
	the hinges in identical
Centre product	positions.

IMPORTANT!

Ensure top of door is installed flush with surrounding cabnetry

14