CANDD HPR400, HPR401, HPR402, HPR403, HPR404 Datasheet

Corporate: www.cd techno.com
Product: www.cd poweronline.com

HPR4XXHPR4XX

HPR4XX

HPR4XXHPR4XX

0.75 Watt Miniature SIP DC/DC Converter

!!

! Non-Conductive Case

!!

High Isolation Voltage: 3000

!

!!

PK Test

V

!!

! Single-In-Line Package (SIP)

!!

!!

!

Internal Input and Output

!!

!!

! Low Cost

!!

!!

!!

! High Output Power Density:

!!

10 Watts/Inch

!!

! Extended Temperature Range:

!!

-25°C to +85°C

!!

! High Efficiency to 79%

!!

3

The HPR4XX Series uses advanced circuit
design and packaging technology to realize
superior reliability and performance. A
170kHz push-pull oscillator is used in the
input stage. The HPR4XX Series reduces
beat-frequency oscillation problems when
used with high frequency isolation amplifiers.
Reduced parts count and high efficiency add to
the reliability of the HPR4XX Series.

SPECIFICATIONS All specifications are typical at T

The high efficiency of the HPR4XX Series
means less internal power dissipation, as low
as 190mW. With less heat to dissipate the
HPR4XX Series can operate at higher
temperatures with no degradation of reliable
operation. In addition, the high efficiency of
the HPR4XX Series means the series is able
to offer greater than 10 W/inch3 of output
power density. Operation down to no load

= +25°C nominal input voltage unless otherwise specified.

A

will not impact the reliability of the series,
although this product has a >1mA minimum
load for specifications purposes.
The HPR4XX Series provides high
isolation in a very small package. The use of
surface mounted devices and manufacturing
technologies makes it possible to offer
premium performance and low cost.

PRODUCT SELECTION CHART

NOMINAL RATED RATED INPUT CURRENT (mA) REFLECTED

INPUT OUTPUT OUTPUT RIPPLE

MODEL (VDC) (VDC) (mA) (mA) TYP MAX (mAp-p) (%)

HPR400 5 5 150 20 216 235 10 69
HPR401 5 12 62 20 212 235 5 70
HPR402 5 15 50 20 212 235 5 71
HPR403 5 ±5 ± 75 20 218 245 5 68
HPR404 5 ±12 ±30 20 212 235 5 68
HPR405 5 ±15 ±25 20 220 220 5 75
HPR406 12 5 15 0 10 90 100 5 69
HPR407 12 12 62 10 81 90 5 77
HPR408 12 15 50 10 81 90 5 77
HPR409 12 ±5 ±75 10 88 98 5 71
HPR410 12 ±12 ±3 0 10 81 90 5 74
HPR411 12 ±15 ±25 10 81 90 5 77
HPR412 15 5 150 8 72 8 0 5 69
HPR413 15 12 62 8 72 80 5 69
HPR414 15 15 50 8 72 80 5 69
HPR415 15 ±5 ±75 8 72 80 5 69
HPR416 15 ±12 ±30 8 63 70 5 76
HPR417 15 ±15 ±25 8 63 66 5 79
HPR418 24 5 150 8 48 53 15 65
HPR419 24 12 62 8 48 5 3 15 65
HPR420 24 15 50 8 45 5 0 15 69
HPR421 24 ±5 ±75 8 45 50 15 6 9
HPR422 24 ±12 ±30 8 45 50 15 67
HPR423 24 ±15 ±25 8 45 50 15 69
NOTE: Other input to output voltages may be available. Please consult factory.

Product: www.cdpoweronline.com

VOLTAGE VOLTAGE CURRENT NO LOAD RATED LOAD CURRENT EFFICIENCY

HPR4XX REV G 1/03

1

SPECIFICATIONS, ALL MODELS

Specifications are at TA = +25°C nominal input voltage unless otherwise specified.

PARAMETER CONDITIONS MIN TYP MAX UNITS

INPUT

Voltage Range 4.5 5 5.5 VDC

10.8 12 13.2 VDC

13.5 15 16.5 VDC

21.6 24 26.4 VDC

OUTPUT

Rated Power 750 mW
Voltage Setpoint Accuracy Rated Load, Nominal V

IN

Ripple & Noise BW = DC to 10MHz 45 mVp-p

BW =10Hz to 2MHz 30 mVrms
HPR403 BW = DC to 10MHz 90 mVp-p
Voltage (Over Input Voltage Range) 1mA Load, V

1mA Load, V
1mA Load, V

= 5V 7 VDC

OUT

= 12V 15 VDC

OUT

= 15V 18 VDC

OUT

Temperature Coefficent .01 %/°C

REGULATION

Line Regulation High Line to Low Line 1 %/%Vin
Load Regulation (5V out only) Rated Load to 1mA Load 10 %
Load Regulation (All other modes) Rated Load to 1mA Load 3 %

GENERAL

ISOLATION
Rated Voltage 1000 VDC
Test Voltage 60 Hz, 60 Seconds 3000 Vpk
Resistance 10 GΩ
Capacitance 15 pF
Leakage Current V

= 240VAC, 60Hz 2 7 µArms

ISO

Switching Frequency 170 kHz
Frequency Change Over Line and Load 24 %
Package Weight 2g
MTTF per MIL-HDBK-217, Rev. E* Circuit Stress Method
Ground Benign TA = +25°C 7.9 MH r

TEMPERATURE

Specification -25 +25 +85 °C
Operation -40 +100 °C
Storage -40 +110 °C

* For demonstrated MTTF results reference: Power Convertibles Reliability Report HPR105.

GENERAL OUTPUT INPUT

±5 %

ABSOLUTE MAXIMUM RATINGS

Internal Power Dissipation .................................450mW

ShortCircuitDuration ........................................... Momentary

Lead Temperature (soldering, 10 seconds max .+300°C *
* NOTE: Refer to Reflow Profile for SMD Models.

Product: www.cdpoweronline.com

HPR4XX REV G 1/03

ORDERING INFORMATION

HPR 4XX

Device Family

HPR Indicates DC/DC Converter

Model Number

Selected from Table of Electrical Characteristics

2