CANDD 17824, 17683, 17474, 17473, 17333 Datasheet

FEATURES

■ Radial Format

■ Up to 1.8A IDC

■ 10µH to 2.2mH

■ Low DC Resistance

■ Miniature Size

■ PCB Mounting

■ MIL-I-23053/5 Class III Sleeving

■ Fully Tinned Leads

■ Supplied in Packs of 20

■ Custom Parts Available

DESCRIPTION

The 1700 Series is a general-purpose range
of inductors suitable for low to medium
current applications. Their small footprint
makes them ideal for high-density
applications where a chip inductor will not
cope with the power requirement.

1700 SERIES

Radial Lead Inductors

SELECTION GUIDE

Inductance Resistance Continuous at f kHz Frequency

±10% (at 1kHz) Ω A

O rder Code µH MAX MAX

17103 10 0.05 1.80 40 1000 21.2

17153 15 0.06 1.50 30 500 19.4

17223 22 0.09 1.20 30 500 17.0

17333 33 0.13 1.00 25 500 11.4

17473 47 0.20 0.86 25 500 10.9

17683 68 0.26 0.85 70 100 10.6

17823 82 0.29 0.79 80 100 9.1

17104 100 0.35 0.74 65 100 8.9

17154 150 0.49 0.58 80 100 6.2

17224 220 0.75 0.48 90 100 5.4

17334 330 1.10 0.42 95 100 4.5

17474 470 1.56 0.34 100 100 3.2

DC DC Current Nominal Q Resonant

Q f MHz

Nominal Self

www.dc-dc.com

17684 680 2.40 0.28 105 100 3.0

17824 820 3.00 0.26 115 100 2.8

17105 1mH 3.30 0.19 120 100 2.5

17155 1.5mH 5.90 0.15 130 100 2.1

17225 2.2mH 7.80 0.12 130 50 1.9

TYPICAL CORE CHARACTERISTICS

Inductance Resistance Curie Saturation

Temperature Temperature Temperature Flux

Coefficient Coefficient T

350ppm 3900ppm 190°C 325mT

C

B

SAT

ABSOLUTE MAXIMUM RATINGS

Operating free air temperature range 0°C to 70°C
Storage temperature range –55°C to 125°C

Specifications typical at TA=25°C

1700 SERIES

Radial Lead Inductors

MECHANICAL DIMENSIONS

Recommended Footprint Details

7.2

Ø1.20+0.15/–0 (x2)

3.50

0.60±0.10

All dimensions in mm

C&D Technologies (NCL) Limited reserve the right to alter or improve the
specification, internal design or manufacturing process at any time, without
notice. Please check with your supplier or visit our web site to ensure that
you have the current and complete specification for your product before use.

© C&D Technologies (NCL) Limited 2000 NMP 1700.2

No part of this publication may be copied, transmitted or stored in a
retrieval system or reproduced in any way including, but not limited to,
photography, photocopy, magnetic or other recording means, without prior
written permission from C&D Technologies (NCL) Limited.

Instructions for use are available from www.dc-dc.com

C&D Technologies (NCL) Ltd

Tanners Drive, Blakelands North
Milton Keynes MK14 5BU, England
Tel: [phone]
Fax:[phone]
email: [e-mail]

www: http://www.dc-dc.com

C&D Technologies (NCL), Inc.

8917 Glenwood Avenue, Raleigh
NC 27612, USA
Tel: [phone]
Fax: [phone]
email: [e-mail]