How it Works
CAN
Loading...
FC Series

CAN FC Series, FC1336, FC1345, FC1347, FC1348 Installation, Use And Maintenance Instruction Manual

...
CAN S.r.l.
Via Nazionale 65,
25080 - Puegnago del Garda (BS) ITALY
T. +39 0365 555909
F. +39 0365 651822
info@cansrl.com
www.cansrl.com
2
Thank you for having purchased our cooking device CAN S.r.l.
This is a quality appliance, made in Italy, that reliably and safely accompanies you throughout your vacation and leisure time, always guaranteeing high level performance.
Installation and use of the device are simple and straightforward.
Please read this manual carefully: this will allow you to install and use your appliance correctly, always keeping it in perfect working order for years. The instructions in this booklet only apply to the Country of destination. The gas supply systems must meet current national standards.
The following symbols have been used in the manual to make it easier to read:
SAFETY-RELATED WARNINGS FOR INSTALLERS AND USERS
Failure to comply with these warnings can cause material damage and jeopardise operation of the appliance.
GENERAL INFORMATION
Additional information for installers and users.
CAN S.r.l., as the manufacturer of the appliance, reserves the right to make changes to its products and to this manual considered appropriate, without being obliged to give prior notice. The drawings, installation diagrams and tables in the manual must be considered as guides and exclusively for explanatory purposes.
CAN S.r.l. prohibits fully or partially copying or reproducing the contents of this manual or forwarding it to third parties without the consent of the Manufacturer.
Edition 07/2018
Revision 00
3
DECLARATION OF CONFORMITY
CAN S.r.l.
Italian company with headquarters at:
Via Nazionale, 65 – 25080, Puegnago del Garda ( BS) – ITALY
VAT NO. 03607980988 – REA BS548442
DECLARES THAT
the products called
GAS HOB UNITS WITH GLASS RECESSED LID
FC SERIES – TYPE: FC133X – FC134X – FC135X
Meet all the essential requirements of the GAD Directive – 2009/142/EEC of 30/11/2009 and also the subsequent GAR regulation - 2016/426/EU of 09/03/2016, as well as the following regulations:
• EC regulation 1935/2004
• EU Regulation no.65/2014 – “ENERGY LABEL”
• EU Regulation no.66/2014 – “ECODESIGN”
Our devices are also manufactured in compliance with all relevant harmonised technical standards for the sector, in particular:
• EN 30-1-1: 2008 + A3 02/2013
• EN 30-2-1: 2015
We hereby declare that all the products of the FC SERIES are built according to the specifications of the appliances described in:
TYPE TEST CERTIFICATE no. 51CO4387 issued by IMQ S.p.a.
as notified body, with identification number 0051
The undersigned, Lorenzo Bellini, as director of the company CAN S.r.l., assumes full responsibility for the truthfulness of the declarations herein.
Puegnago del Garda, 26/03/2018
Signature: Lorenzo Bellini
4
TABLE OF CONTENTS
TECHNICAL DATA SHEET: FC1336 6
TECHNICAL DATA SHEET: FC1337 8
TECHNICAL DATA SHEET: FC1343 10
TECHNICAL DATA SHEET: FC1344 12
TECHNICAL DATA SHEET: FC1345 14
TECHNICAL DATA SHEET: FC1347 16
TECHNICAL DATA SHEET: FC1348 18
TECHNICAL DATA SHEET: FC1349 20
TECHNICAL DATA SHEET: FC1350 22
TECHNICAL DATA SHEET: FC1352 24
GENERAL SAFETY WARNINGS 26 INTENDED USE 27 OBLIGATIONS AND PROHIBITIONS 27
OBLIGATIONS 27
PROHIBITIONS 27
IDENTIFICATION OF THE APPLIANCE 28 RECEIVING THE APPLIANCE 29
CONTROL AND HANDLING 29
DISPOSING OF THE PACKAGING 29
GENERAL PRELIMINARY INFORMATION 26
5
Installation, use and maintenance instruction manual ▪ Ed. 07/2018 Rev. 00
INSTRUCTIONS FOR THE INSTALLER 30
INSTALLATION ROOM 30
FEATURES OF INSTALLATION ROOM 30
FLUE GAS EXHAUST 30
INSTALLATION ON SUPPORT STRUCTURE 31
RECESSED HOLE 31
SAFETY DISTANCES 32
POSITIONING THE APPLIANCE 33
GAS CONNECTION 34
GAS CATEGORIES 34
CONNECTION PIPE REQUIREMENTS 34
GAS CONNECTION PROCEDURE 35
ELECTRICAL CONNECTION (ONLY FOR E VERSION) 35 TROUBLESHOOTING AFTER INSTALLATION 36
INSTRUCTIONS FOR USE 37
SPARE PARTS 54
DESCRIPTION 37 SAFETY WARNINGS DURING USE 48 USE 48
LIGHTING THE BURNERS 49
ADJUSTING THE FLAME 50
COOKING OR WARMING UP FOOD 50
SWITCHING OFF THE BURNER 51
OPERATING FAULTS 51
WHAT TO DO IN CASE OF MALFUNCTIONING 51
MAINTENANCE AND CLEANING 52 LONG IDLE PERIODS 53 WASTE DISPOSAL 53 WARRANTY 53
SPARE PARTS - FC1336 54 SPARE PARTS - FC1337 55 SPARE PARTS - FC1343 56 SPARE PARTS - FC1344 56 SPARE PARTS - FC1345 57 SPARE PARTS - FC1347 58 SPARE PARTS - FC1348 59 SPARE PARTS - FC1349 59 SPARE PARTS - FC1350 60 SPARE PARTS - FC1352 61
6
TECHNICAL DATA SHEET: FC1336
RECESSED HOLE FC1336
C
A
B
5 mm
8 mm
Detail C
85 mm
R10
128 mm
R32
R70
7
Installation, use and maintenance instruction manual ▪ Ed. 07/2018 Rev. 00
Dimensions Width 530 mm
Depth 340 mm Height 48 mm (hob area)
105 mm (valves area)
Weight 3.6 kg
Hob Unit
(straight valves with bypass Ø 0.36 mm)
Nominal values:
1 x AUXILIARY burner (AUX) Pn 1.00 kW – injector ø 0.50 mm – consumption 72.50 g/h
1 x SEMIRAPID burner (SR): Pn 1.75 kW – injector ø 0.65 mm – consumption 127.0 g/h
Device Class
(EN 30-1-1 4.3)
CLASS 3 – Recessed hob unit
Device Category
(EN 30-1-1 5.1.1.2)
CATEGORY I
Admitted Gases family
(EN 437) (EN 30-1-1 4.2.2.4)
GAS OF THE THIRD FAMILY
▪ I3 B/P ▪ I3+
Gas Supply CATEGORY I3 B/P
▪ Butane (G30) 30 mbar ▪ Propane (G31) 30 mbar
CATEGORY I3+
▪ Butane (G30) 28-30 mbar ▪ Propane (G31) 37 mbar
Electric Connection
(only for “E” version with electronic lighting)
ELECTRIC CONNECTION IN EXTRA-LOW VOLTAGE - 12V / DC
Lighting ▪ S (MANUAL) – using external igniter
▪ E (ELECTRONIC) - 12 V/DC GENERATOR - SPARK - 10Kv @ 30 pF ▪ P (PIEZOELECTRIC) – Mechanically/manually operated piezoelectric igniter inserted
in hob unit
Gas Connection
Galvanised steel train: Ø 8 mm - 1 mm thick smooth end piece (30 mm) suitable for press fitting connecting with rigid / flexible hose
Gas Capillaries Copper capillary pipes: Ø 4 mm – 0.5 mm thick Materials ▪ Stainless steel AISI 304
▪ Glass ▪ Chromium-plated iron ▪ Zama ▪ Brass ▪ Copper ▪ Galvanised steel ▪ Aluminium alloy ▪ Enamelled steel ▪ Epdm
Declaration of Conformity
(GAR 2016/426/EC)
▪ no asbestos ▪ suitable materials according to chapters 2 and 3 (Annex I) ▪ there are no welds with melting point lower than 450°C ▪ flammable materials were not used ▪ the materials are suitable according to the requirements of chapter 3.7
TECHNICAL DATA SHEET: FC1336
8
TECHNICAL DATA SHEET: FC1337
RECESSED HOLE FC1337
C
Detail C
A
B
R32
R70
130 mm
30 mm
R8
5
9
Installation, use and maintenance instruction manual ▪ Ed. 07/2018 Rev. 00
TECHNICAL DATA SHEET: FC1337
Dimensions Width 340 mm
Depth 530 mm Height 48 mm (hob area)
105 mm (valves area)
Weight 3.8 kg
Hob Unit
(straight valves with bypass Ø 0.36 mm)
Nominal values:
1 x AUXILIARY burner (AUX) Pn 1.00 kW – injector ø 0.50 mm – consumption 72.50 g/h
1 x SEMIRAPID burner (SR): Pn 1.75 kW – injector ø 0.65 mm – consumption 127.0 g/h
Device Class
(EN 30-1-1 4.3)
CLASS 3 – Recessed hob unit
Device Category
(EN 30-1-1 5.1.1.2)
CATEGORY I
Admitted Gases family
(EN 437) (EN 30-1-1 4.2.2.4)
GAS OF THE THIRD FAMILY
▪ I3 B/P ▪ I3+
Gas Supply CATEGORY I3 B/P
▪ Butane (G30) 30 mbar ▪ Propane (G31) 30 mbar
CATEGORY I3+
▪ Butane (G30) 28-30 mbar ▪ Propane (G31) 37 mbar
Electric Connection
(only for “E” version with electronic lighting)
ELECTRIC CONNECTION IN EXTRA-LOW VOLTAGE - 12V / DC
Lighting ▪ S (MANUAL) – using external igniter
▪ E (ELECTRONIC) - 12 V/DC GENERATOR - SPARK - 10Kv @ 30 pF ▪ P (PIEZOELECTRIC) – Mechanically/manually operated piezoelectric igniter inserted
in hob unit
Gas Connection
Galvanised steel train: Ø 8 mm - 1 mm thick smooth end piece (30 mm) suitable for press fitting connecting with rigid / flexible hose
Gas Capillaries Copper capillary pipes: Ø 4 mm – 0.5 mm thick Materials ▪ Stainless steel AISI 304
▪ Glass ▪ Chromium-plated iron ▪ Zama ▪ Brass ▪ Copper ▪ Galvanised steel ▪ Aluminium alloy ▪ Enamelled steel ▪ Epdm
Declaration of Conformity
(GAR 2016/426/EC)
▪ no asbestos ▪ suitable materials according to chapters 2 and 3 (Annex I) ▪ there are no welds with melting point lower than 450°C ▪ flammable materials were not used ▪ the materials are suitable according to the requirements of chapter 3.7
10
TECHNICAL DATA SHEET: FC1343
A
B
R32
R80
R340
RECESSED HOLE FC1343
11
Installation, use and maintenance instruction manual ▪ Ed. 07/2018 Rev. 00
TECHNICAL DATA SHEET: FC1343
Dimensions Width 480 mm
Depth 480 mm Height 105 mm Weight 5.5 kg
Hob Unit
(straight valves with bypass Ø 0.36 mm)
Nominal values:
1 x AUXILIARY burner (AUX) Pn 1.00 kW – injector ø 0.50 mm – consumption 72.50 g/h
2 x SEMIRAPID burner (SR): Pn 1.75 kW – injector ø 0.65 mm – consumption 127.0 g/h
Device Class
(EN 30-1-1 4.3)
CLASS 3 – Recessed hob unit
Device Category
(EN 30-1-1 5.1.1.2)
CATEGORY I
Admitted Gases family
(EN 437) (EN 30-1-1 4.2.2.4)
GAS OF THE THIRD FAMILY
▪ I3 B/P ▪ I3+
Gas Supply CATEGORY I3 B/P
▪ Butane (G30) 30 mbar ▪ Propane (G31) 30 mbar
CATEGORY I3+
▪ Butane (G30) 28-30 mbar ▪ Propane (G31) 37 mbar
Electric Connection
(only for “E” version with electronic lighting)
ELECTRIC CONNECTION IN EXTRA-LOW VOLTAGE - 12V / DC
Lighting ▪ S (MANUAL) – using external igniter
▪ E (ELECTRONIC) - 12 V/DC GENERATOR - SPARK - 10Kv @ 30 pF
Gas Connection
Galvanised steel train: Ø 8 mm - 1 mm thick smooth end piece (30 mm) suitable for press fitting connecting with rigid / flexible hose
Gas Capillaries Copper capillary pipes: Ø 4 mm – 0.5 mm thick Materials ▪ Stainless steel AISI 304
▪ Glass ▪ Chromium-plated iron ▪ Zama ▪ Brass ▪ Copper ▪ Galvanised steel ▪ Aluminium alloy ▪ Enamelled steel ▪ Epdm
Declaration of Conformity
(GAR 2016/426/EC)
▪ no asbestos ▪ suitable materials according to chapters 2 and 3 (Annex I) ▪ there are no welds with melting point lower than 450°C ▪ flammable materials were not used ▪ the materials are suitable according to the requirements of chapter 3.7
12
TECHNICAL DATA SHEET: FC1344
RECESSED HOLE FC1344
A
B
R32
R80
R340
13
Installation, use and maintenance instruction manual ▪ Ed. 07/2018 Rev. 00
TECHNICAL DATA SHEET: FC1344
Dimensions Width 480 mm
Depth 480 mm Height 105 mm Weight 5.5 kg
Hob Unit
(straight valves with bypass Ø 0.36 mm)
Nominal values:
1 x AUXILIARY burner (AUX) Pn 1.00 kW – injector ø 0.50 mm – consumption 72.50 g/h
2 x SEMIRAPID burner (SR): Pn 1.75 kW – injector ø 0.65 mm – consumption 127.0 g/h
Device Class
(EN 30-1-1 4.3)
CLASS 3 – Recessed hob unit
Device Category
(EN 30-1-1 5.1.1.2)
CATEGORY I
Admitted Gases family
(EN 437) (EN 30-1-1 4.2.2.4)
GAS OF THE THIRD FAMILY
▪ I3 B/P ▪ I3+
Gas Supply CATEGORY I3 B/P
▪ Butane (G30) 30 mbar ▪ Propane (G31) 30 mbar
CATEGORY I3+
▪ Butane (G30) 28-30 mbar ▪ Propane (G31) 37 mbar
Electric Connection
(only for “E” version with electronic lighting)
ELECTRIC CONNECTION IN EXTRA-LOW VOLTAGE - 12V / DC
Lighting ▪ S (MANUAL) – using external igniter
▪ E (ELECTRONIC) - 12 V/DC GENERATOR - SPARK - 10Kv @ 30 pF
Gas Connection
Galvanised steel train: Ø 8 mm - 1 mm thick smooth end piece (30 mm) suitable for press fitting connecting with rigid / flexible hose
Gas Capillaries Copper capillary pipes: Ø 4 mm – 0.5 mm thick Materials ▪ Stainless steel AISI 304
▪ Glass ▪ Chromium-plated iron ▪ Zama ▪ Brass ▪ Copper ▪ Galvanised steel ▪ Aluminium alloy ▪ Enamelled steel ▪ Epdm
Declaration of Conformity
(GAR 2016/426/EC)
▪ no asbestos ▪ suitable materials according to chapters 2 and 3 (Annex I) ▪ there are no welds with melting point lower than 450°C ▪ flammable materials were not used ▪ the materials are suitable according to the requirements of chapter 3.7
14
TECHNICAL DATA SHEET: FC1345
RECESSED HOLE FC1345
Please note: secured with adhesive.
15
Installation, use and maintenance instruction manual ▪ Ed. 07/2018 Rev. 00
TECHNICAL DATA SHEET: FC1345
Dimensions External Diameter (Ø) 340 mm
Height 80 mm Weight 2.1 kg
Hob Unit
(straight valves with bypass Ø 0.36 mm)
Nominal values:
1 x SEMIRAPID burner (SR): Pn 2.00 kW – injector ø 0.70 mm – consumption 145.50 g/h
Device Class
(EN 30-1-1 4.3)
CLASS 3 – Recessed hob unit
Device Category
(EN 30-1-1 5.1.1.2)
CATEGORY I
Admitted Gases family
(EN 437) (EN 30-1-1 4.2.2.4)
GAS OF THE THIRD FAMILY
▪ I3 B/P ▪ I3+
Gas Supply CATEGORY I3 B/P
▪ Butane (G30) 30 mbar ▪ Propane (G31) 30 mbar
CATEGORY I3+
▪ Butane (G30) 28-30 mbar ▪ Propane (G31) 37 mbar
Electric Connection
(only for “E” version with electronic lighting)
ELECTRIC CONNECTION IN EXTRA-LOW VOLTAGE - 12V / DC
Lighting ▪ S (MANUAL) – using external igniter
▪ E (ELECTRONIC) - 12 V/DC GENERATOR - SPARK - 10Kv @ 30 pF
Gas Connection Galvanised steel train: Ø 8 mm - 1 mm thick
smooth end piece (30 mm) suitable for press fitting connecting with rigid / flexible hose
Gas Capillaries Copper capillary pipes: Ø 4 mm – 0.5 mm thick Materials ▪ Stainless steel AISI 304
▪ Glass ▪ Chromium-plated iron ▪ Zama ▪ Brass ▪ Copper ▪ Galvanised steel ▪ Aluminium alloy ▪ Enamelled steel ▪ Epdm
Declaration of Conformity
(GAR 2016/426/EC)
▪ no asbestos ▪ suitable materials according to chapters 2 and 3 (Annex I) ▪ there are no welds with melting point lower than 450°C ▪ flammable materials were not used ▪ the materials are suitable according to the requirements of chapter 3.7
16
TECHNICAL DATA SHEET: FC1347
RECESSED HOLE FC1347
A
B
R60
R100
17
Installation, use and maintenance instruction manual ▪ Ed. 07/2018 Rev. 00
TECHNICAL DATA SHEET: FC1347
Dimensions Width 440 mm
Depth 440 mm Height 80 mm Weight 5.3 kg
Hob Unit
(straight valves with bypass Ø 0.36 mm)
Nominal values:
1 x AUXILIARY burner (AUX): Pn 1.10 kW – injector ø 0.52 mm – consumption 80.00 g/h
2 x SEMIRAPID burner (SR): Pn 2.00 kW – injector ø 0.70 mm – consumption 145.50 g/h
Device Class
(EN 30-1-1 4.3)
CLASS 3 – Recessed hob unit
Device Category
(EN 30-1-1 5.1.1.2)
CATEGORY I
Admitted Gases family
(EN 437) (EN 30-1-1 4.2.2.4)
GAS OF THE THIRD FAMILY
▪ I3 B/P ▪ I3+
Gas Supply CATEGORY I3 B/P
▪ Butane (G30) 30 mbar ▪ Propane (G31) 30 mbar
CATEGORY I3+
▪ Butane (G30) 28-30 mbar ▪ Propane (G31) 37 mbar
Electric Connection
(only for “E” version with electronic lighting)
ELECTRIC CONNECTION IN EXTRA-LOW VOLTAGE - 12V / DC
Lighting ▪ S (MANUAL) – using external igniter
▪ E (ELECTRONIC) - 12 V/DC GENERATOR - SPARK - 10Kv @ 30 pF
Gas Connection
Galvanised steel train: Ø 8 mm - 1 mm thick smooth end piece (30 mm) suitable for press fitting connecting with rigid / flexible hose
Gas Capillaries Copper capillary pipes: Ø 4 mm – 0.5 mm thick Materials ▪ Stainless steel AISI 304
▪ Glass ▪ Chromium-plated iron ▪ Zama ▪ Brass ▪ Copper ▪ Galvanised steel ▪ Aluminium alloy ▪ Enamelled steel ▪ Epdm
Declaration of Conformity
(GAR 2016/426/EC)
▪ no asbestos ▪ suitable materials according to chapters 2 and 3 (Annex I) ▪ there are no welds with melting point lower than 450°C ▪ flammable materials were not used ▪ the materials are suitable according to the requirements of chapter 3.7
18
TECHNICAL DATA SHEET: FC1348
RECESSED HOLE FC1348
340
460
Please note: secured with adhesive.
19
Installation, use and maintenance instruction manual ▪ Ed. 07/2018 Rev. 00
TECHNICAL DATA SHEET: FC1348
Dimensions Width 510 mm (maximum overall dimension)
Depth 390 mm (maximum overall dimension) Height 80 mm Weight 3.8 kg
Hob Unit
(straight valves with bypass Ø 0.36 mm)
Nominal values:
1 x AUXILIARY burner (AUX): Pn 1.10 kW – injector ø 0.52 mm – consumption 80.00 g/h
1 x SEMIRAPID burner (SR): Pn 2.00 kW – injector ø 0.70 mm – consumption 145.50 g/h
Device Class
(EN 30-1-1 4.3)
CLASS 3 – Recessed hob unit
Device Category
(EN 30-1-1 5.1.1.2)
CATEGORY I
Admitted Gases family
(EN 437) (EN 30-1-1 4.2.2.4)
GAS OF THE THIRD FAMILY
▪ I3 B/P ▪ I3+
Gas Supply CATEGORY I3 B/P
▪ Butane (G30) 30 mbar ▪ Propane (G31) 30 mbar
CATEGORY I3+
▪ Butane (G30) 28-30 mbar ▪ Propane (G31) 37 mbar
Electric Connection
(only for “E” version with electronic lighting)
ELECTRIC CONNECTION IN EXTRA-LOW VOLTAGE - 12V / DC
Lighting ▪ S (MANUAL) – using external igniter
▪ E (ELECTRONIC) - 12 V/DC GENERATOR - SPARK - 10Kv @ 30 pF ▪ P (PIEZOELECTRIC) – Mechanically/manually operated piezoelectric igniter inserted
in hob unit
Gas Connection
Galvanised steel train: Ø 8 mm - 1 mm thick smooth end piece (30 mm) suitable for press fitting connecting with rigid / flexible hose
Gas Capillaries Copper capillary pipes: Ø 4 mm – 0.5 mm thick Materials ▪ Stainless steel AISI 304
▪ Glass ▪ Chromium-plated iron ▪ Zama ▪ Brass ▪ Copper ▪ Galvanised steel ▪ Aluminium alloy ▪ Enamelled steel ▪ Epdm
Declaration of Conformity
(GAR 2016/426/EC)
▪ no asbestos ▪ suitable materials according to chapters 2 and 3 (Annex I) ▪ there are no welds with melting point lower than 450°C ▪ flammable materials were not used ▪ the materials are suitable according to the requirements of chapter 3.7
Loading...
+ 43 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use