camry ek6550h Instructions For Use Manual

CLEANING AND CARE

MEASURING
CUP SCALES

2. All plastic parts should be cleaned immediately after contact with fats, spices, vinegar and strongly flavored/colored foods.
Avoid contact with acids citrus juices.

3. Always use the scale on a hard, flat surface. DO NOT use on carpet.
.
.
.
.
.

1.Clean the product with a soft, slightly damp (not wet) cloth. Remove container to clean up. Ensure container is empty before

removing; Do not put scale into water. The scale is not water-proof.

4 DO NOT strike, shake or drop the scale.
5 The scale is precise instrument. Please treat with care.
6 Put the scale in cool and dry place.
7 If fail to switch on the scale, check whether battery is installed, or battery power is low.
8 For family use only. DO NOT use for commercial purpose.

Auto shut-off occurs if display shows

'0' or shows the same we ight reading

for 30 seconds.

AUTO SHUT OFF

To maximize battery life, please press

button for 3 seconds to turn off

scale after use.

MANUAL SHUT OFF

1.

2.

WARNING INDICATORS

1. Replace new battery.

2. Scale overload. Remove item to avoid

damage.Max.weight capacity is

indicated on the scale.

1 2

Oil

Flour

Milk

Water

1.Measuring cup fuction

2.Indicate volume of water,milk,oil and flour

3.Two weight unit systems g lb:oz convertible

4.Convertible volume unit: ml,fl'oz and cup

5.Tare,Zero function

6.Low battery power/Overload indication

7.Auto off

FEATURES

LCD

FUNCTION BUTTON

Mode conversion

Unit conversion

Volume unit( )fl'oz

Tare function

Weight unit(lb:oz)

Mode selector
(Arrow keys)

Weight unit(g)

Volume unit(ml)

TO INSTALL OR REPLACE BATTERY

A. Take out the used batteries (with the aid of a
sharp object, if needed)
B. Install new battery by putting one side of the
battery and then pressing down the other side.
Please take note to the polarity.

2x1.5V AAA batteries (not included)

Measuring cup

Body

Button

TO INSTALL CUP

1.To take out

Thumbs withhold sliding closure

to make the tapered ned detach

from plate,take out the measuring

cup with the other hand.

2.To install
Make the plate to align the tapered
ned position,and press the measuring
cup,loosen your hand after hearing
"clack" ,just check it whether the cup
is locked.

Sliding closure

Tapered ned

Plate

43

Oil

Flour

Milk

Water

Oil

Flour

Milk

Water

Oil

Flour

Milk

Water

Oil

Flour

Milk

Water

UNIT CONVERSION BUTTON

If the item to be weighted is in Metric system (kilogram/gram) and Imperial system (pounds/ounces ).

1. Weight unit conversion:

To switch between Metric system and system, press the UNIT button while in weighing mode.Imperial

2.Volume unit conversion

Press UNIT to switch between ml(fl' oz) and CUP under volume mode. For instance,under water mode:

Remark: The unit system of scale depends on sales destination or the requirement of distributor.

Oil

Flour

Milk

Water

Oil

Flour

Milk

Water

Oil

Flour

Milk

Water

TO MEASURE

1. Weighing mode

A. Place the scale on a solid and flat

surface.

B. Place bowl (if used) on the scale

before turning on the scale.

C. Press to enter weighing

mode.

D.

E. Load weighing object on to start

weighing,LCD wil l show the weight

reading.

Wait until “0” display on LCD.

Place items

Oil

Flour

Milk

Water

Oil

Flour

Milk

Water

Oil

Flour

Milk

Water

Oil

Flour

Milk

Water

Oil

Flour

Milk

Water

MODE CONVERSION

The product will be in weighing mode after turning on. Please press MODE
to switch mode (weighig, water volume, milk volume, cooking oil volume
and flour). Then press UNIT to select the unit that you need.

Water mode Milk volume mode

Oil volume mode

Flour volume mode

Weighting mode

65

Oil

Flour

Milk

Water

Oil

Flour

Milk

Water

Oil

Flour

Milk

Water

Oil

Flour

Milk

Water

"ZERO" OR "TARE" FUNCTION

To weigh different loads consecutively without removing loads from the scale.

Put first Load on the scale, get weight reading. Press button to reset the

LCD reading to "0" before adding next load. You can repeat this operation.

LCD will show “-----” or “0g” each time

is pressed. “-----” means processing, please

wait for a moment. When “0g” and icon “T”

on lower left corner of LCD show up together,

it means “TARE” function is active.Max. Weight

capacity is reduced by total weight of all loads.

LCD display will show dash “---“ or “0g”

each time is pressed. Please wait

when “---“ shows, it means processing.

“0g” will display when weights have been

zeroed out, Maximum weight capacity

remains unchanged.

Oil

Flour

Milk

Water

Oil

Flour

Milk

Water

Oil

Flour

Milk

Water

Oil

Flour

Milk

Water

Oil

Flour

Milk

Water

2. Volume mode

A.Place the container.Place thescale

ona solid and flat surface.

B. Press to turnon the scale.

For instance, measur milk with
CUP unit, step as follow:

e

C. Wait until “0” display on LCD,

press MODE button to select

“milk” mode.

D.Press UNIT button to set CUP

unit.

E. LCD will display the volume

of the liquid in the container.

Pour milk