Campomatic WM950XE User Manual

Front Load Washing Machine Instruction Manual

MODEL:

WM950XE

Please read this instruction manual carefully before you use this product

Contents

Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2
Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4
Control Panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5
Washing programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ 7
Helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 8
First use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9
Personalisation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9
Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 10
Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 12
What to do if ... _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 15
Technical data _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 17
Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 18
Electrical connection_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 19
Environmental concerns _ _ _ _ _ _ _ _ _ _ _ _ _ _ 19
Repair and After-sales Service_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 20

_ _ _ _ _

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Safety information

Important! Read carefully & keep for future reference.

• The safety of your appliance complies with the industry standards and with legal requirements on the safety
of appliances. However, as manufacturers, we feel it is our duty to provide the following safety notes.

• It is most important that this instruction book should be retained with the appliance for future reference.
Should the appliance be sold or transferred to

appliance, always ensure that the book is supplied with the appliance in order that the new

get to know the functioning of the appliance and the relevant warnings.

• You MUST read them carefully before installing or

• Before first starting up, check the appliance for any damage incurred during transport. Never connect up a
damaged appliance . If parts are damaged, contact your supplier.

• If the appliance is delivered in the winter months when there are minus temperatures, store it at room
temperature for 24 hours before using for the first time.

General safety

• It is dangerous to alter the specifications or attempt to modify this product in any way.

• During high temperature wash programmes the doorglass may get hot. Do not touch it!

• Make sure that small children and pets do not climb into the drum.To avoid this, please check into the drum
before using.

• Any objects such as coins, safety pins, nails, screws,stones or any other hard, sharp material can cause
extensive damage and must not be placed into the machine.

• Only use the advised quantities of fabric softener and detergent. Damage to the fabric can ensue if you over­fill. Refer to the manufacturer’s recommendations of quantities.

• Wash small items such as socks, laces, washable belts etc in a washing bag or pillow case as it is possible
for such items to slip down between the tub and the inner drum.

• Do not use your washing machine to wash articles with whalebones, material without hems or torn material.

• Always unplug the appliance and turn off the watersupply after use, cleaning and maintenance.

• Under no circumstances should you attempt to repair the machine yourself. Repairs carried out by
inexperienced people may cause injury or serious malfunctioning. Contact your local Service Centre.
insist on genuine spare parts.

another owner, or should you move house and

using the appliance.

leave the

owner can

Always

2

Installation Instruction

Before the operation

• This appliance is heavy. Care should be taken when moving it.

• When unpacking the appliance, check that it is not damaged. If in doubt, do not use it and contact the Service
Centre.

• All packing and transit bolts must be removed before use. Serious damage can occur to the product and to
property if this is not adhered to. See relevant section in the user manual.

• After having installed the appliance, check that it is not standing on the inlet and drain hose and the worktop
is not pressing the electrical supply cable against the wall.

• If the machine is situated on a carpeted floor, please adjust the feet in order to allow air to circulate freely
under the appliance.

• Always be sure, that there is no water leakage from hoses and their connections after the installation.

• If the appliance is installed in a location subject to frost, please read the “dangers of freezing” chapter.

• Any plumbing work required to install this appliance should be carried out by a qualified plumber or
competent person.

• Any electrical work required to install this appliance should be carried out by a qualified electrician or
competent person.

Use

• This appliance is designed for domestic use. It must not be used for purposes other than those for which it
was designed.

• Only wash fabrics which are designed to be machine washed.Follow the instructions on each garment label.

• Do not overload the appliance. See the Washing Programme Table.

• Before washing, ensure that all pockets are empty
or torn articles and treat stains such as paint,
NOT be machine washed.

• Garments which have been in contact with volatile
If volatile cleaning fluids are used, care should be taken to ensure that the fluid is removed from the garment

•

and buttons and zips are fastened. Avoid washing

ink, rust, and grass before washing. Underwired

petroleum products should not be machine washed.

frayed

bras must

before placing in the machine.

• Never pull the power supply cable to remove the plug from the socket; always take hold of the plug itself.

• Never use the appliance if the power supply cable, the control panel, the working surface or the base are
damaged so that the inside of the washing machine is accessible.

Child safety

• This appliance is not intended for use by person (including children) with reduced physical sensory or mental
capabilities or lack of experience and knowledge unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.

• The packaging components (e.g. plastic film, polystyrene) can be dangerous to children - danger of
suffocation! - Keep them out of children’s reach!

• Keep all detergents in a safe place out of children’s reach.

• Make sure that children or pets do not climb into the drum. To prevent children and pets becoming trapped
inside the drum this machine incorporates a special feature.

3

Product description

The detergent
compartment

Basket

The control panel

Door handle

Service panel

Detergent dispenser drawer

Compartment for detergent used for

I

phase or for stain

phase

(if available). The prewash and soak

remover used during the stain action

added at the beginning of the
stain remover is
Compartment for powder or liquid

II

wash. If using liquid

added during the stain action phase.

detergent pour it just before starting

the programme.
Compartment for liquid additives (fabric softener, starch).
Follow the product manufacturer’s

quantities to use and do not exceed the «MAX»

mark in the detergent

dispenser drawer. Any fabric

softener or starching additives must be

compartment before starting

prewash and soak

detergent is

wash programme. The

detergent used for main

recommendations on

poured into the

the wash programme.

Quick Guide

1. Install the washing machine

2. Load the laundry

3. measure out the detergent

4. Close the machine door

5. Put down (hang up) the drain pipe

6. Turn on the water tap

7. Plug the power supply

8. Select the desired programme

9. Press the [start/pause] key

«MAX»

II

Main wash detergent

Special additive

I

Pre-wash detergent

4

Control panel

4

Power

Start/
Pause

5

Add Garment

11

1

LED screen display

2

Misty Washing

3

Programme button

4

POWER button

5

START/PAUSE button

Delay

10

1

W

ater Level

9

2

RPM

( )

High

Mid

Low

iny

T

emp.

T

8

(1200)

0

(900)

8

No-Spin

Spin Speed

Child Lock

Misty W

Pre-Wa sh

Extra - ----

Smart -----

Function

67

ashing

Rinse

Kidswear

Underwear

Color

Mixed

Active
Enzyme

clean

-

Self

Spin

&

Rinse

6

Function

7

SPIN SPEED button

8

TEMPERATURE button

9

WATER LEVEL button

10

DELY button

11

ADD GARMENT button

3

Cotton

Quick Wash

Heavy

Synthetics

W

Silk

ash

W

Spin

&

Drain

ool

LED screen display

Only light (pre-wash, wash, rinse, spin) relevant to the phase that is currently being carried out will remain lit

•

during the washing process.

The delay start light will flash to indicate the delay time. It will start the programme after 【xx】

•

After the wash procedure begins, 【REMAIN】will be lightened, to display the remaining time, that is , the

•

hours.

wash closes in【xx】time.

•

When the child lock function is selected，【CHILD LOCK】will be lightened.

•

When the door is at the lock state, 【DOOR LOCK】 will be lightened. The door can be opened only after

the light turned off.

Misty Washing

•

Injects the full atomization water into the basket during high-speed dehydration process, it not only washes

the clothes cleaner,also rins es more thorough.

PROGRAMME selector button

• So your clothes have a more efficient and clean wash different wash cycles can be selected depending on
the users needs.

Power button

<<Power>>button,has the start function,When this button is pressed continuously,this machine is switched start.

••

START/PAUSE button

•

<< >>Start/Pause button, has the start and pause function. When this button is pressed continuously

, this

machine is switched between start and pause.

Function button

In order to get better care of your cl othes you can select the extra rinse or pre wash function

•

WATER LEVEL button

•You can select according to the soil level of the laundry.

5

SPIN SPEED button

By pressing this button you can change the spin speed of the selected programme or to select Rinse Hold option.

TEMPERATURE button

This button is used to adjust the wash temperature.You can select different water temperature or no heating by
pressing the button repeatedly.

DELAY button

T his button is used for delay wash.You can get 0-24 hours through pressing this key contimously. The delay

time means the wash will begin in 《xx》h ours.

ADD GARMENT button

<<<<

Add garment

This operation can be executed

<<

during the washing procedure . When the basket of the

washing machine is still rolli ng and there is large amount of water with high temperature in th e

basket. The state is unsaf e and the door cannot be opened forcefully. To press《sta rt/pause/add
garment》,and start the clothes ad ding in the midway function. Please foll ow the steps bellow:

The door lock is unlocked

and repressed the《start/pause/add garmen》button

aded

Additional child lock.

•

There is an additional, selectable child safety feature. To select it, press button 6+ button 7 for three
seconds. The Child Lock button also locks the Start/Pause button. An English text and the image of the head
of a child appear in the display when the lock is activated.

You can now also press the Pause button without anything happening.

•

There will just be an error beep. When the programme has finished, the door can be opened, but to select the
next wash you need to press the once more to cancel the child lock.button 6+ button 7
Turning the machine off and then on again will not cancel the child lock, so it can be left permanently locked.

6

Ordinary clothes

Clothes to be

washed (suggestion)

Not so dirty clothes

fad ing clo thes

Chemical fiber clothes

Silk clothes

Wool fleece clothes

need the single wash

The clothes that only

The clothes after

the hand wash

Children's underwear

Intimate clothes

Ordinary clothes

Except wool and silk clothes

No any detergent

Comparatively dirty

clothes

The clothes that only

need the bleaching wash

operation time

1:23

10KG

Default

Softener

Main wash

I

I

detergent box

Pre-wash

I

Misty

Wash

Optional

Smart

Wash

Optional

Optional

Pre-Wash

Optional

Extra Rinse

10

10Kg

The maximum washing

capacity (kilogram)

0:24

×

Optional

Non-optional

Non-optional

Optional

4

3:01

Optional

Optional

Optional

Optional

10

0:57

Optional

Optional

Optional

Optional

4

0:45

×

Optional

Optional

Optional

Optional

Non-optional

Non-optional

Optional

Optional

3.5

0:36

×

3

0:33

××

Non-optional

Non-optional

Optional

Non-optional

10

0:08

×

×

×

Optional

Non-optional

Optional

Non-optionalNon-optional

Optional

Non-optional

10

1:02

Optional

10

1:35

Optional

Optional

Optional

Optional

4

0:53

Optional

Optional

Optional

Optional

4

1:02

Optional

Optional

Optional

Optional

10

1:52

Optional

Optional

Must

Optional

4

0:57

×

×

Non-optional

Non-optional

Non-optional

Non-optional

Non-optional

0:14

×

×

Optional

Non-optional

It means it is necessary to add the detergent，or the wash effect cannot be reached.

Optional

10

1000

1000

95

Cotton

1000

40

Quick

（RPM）

Maximum spin speed

Maximum

(Centigrade)

temperature

Fabric

Cycle

Programme table

1000

95

Heavy

800

60

Synthetics

800

40

Wool

600

30

Silk

Wash

95

1000

Drain & Spin

1000

60

Kidswear

1000

95

Underwear

1000

40

Color

1000

60

Mixed

1000

60

Active

enzyme

600

95

Self-clean

1000

It means the detergent or the softener cannot be added.

The operation time of the wash machine will change with the variance of the water temperature, water level, clothes, inlet water pressure and drain state.

It means to add the detergent or the softener when it is needed.

！

Rinse & Spin

×

Energy test program:Heavy 60 C

7

Helpful hints and tips

Sorting out the laundry

Follow the wash code symbols on each garment label and the manufacturer’s washing instructions. Sort the
laundry as follows: whites, coloureds, synthetics, delicates, woollens.

Before loading the laundry

Never wash whites and coloureds together. Whites may lose their «whiteness» in the wash.
New coloured items may run in the first wash; they should therefore be washed separately the first time.
Button up pillowcases, close zip fasteners, hooks and poppers. Tie any belts or long tapes.
Remove persistent stains before washing.
Rub particularly soiled areas with a special detergent or detergent paste.
Treat curtains with special care. Remove hooks or tie them up in a bag or net.

Removing stains

Stubborn stains may not be removed by just water and detergent. It is therefore advisable to treat them prior to
washing.
Blood: treat fresh stains with cold water. For dried stains, soak overnight in water with a special detergent then
rub in the soap and water.
Oil based paint: moisten with benzine stain remover, lay the garment on a soft cloth and dab the stain; treat
several times.
Dried grease stains: moisten with turpentine, lay the garment on a soft surface and dab the stain with the
fingertips and a cotton cloth.
Rust: oxalic acid dissolved in hot water or a rust removing product used cold. Be careful with rust stains which
are not recent since the cellulose structure will already have been damaged and the fabric tends to hole.

Mould stains: treat with bleach, rinse well (whites and fast coloureds only).
Grass: soap lightly and treat with bleach (whites and fast coloureds only).
Ball point pen and glue: moisten with acetone*, lay the garment on a soft cloth and dab the stain.

Lipstick: moisten with acetone as above, then treat

marks with bleach.
Red wine: soak in water and detergent, rinse and treat with acetic or citric acid, then rinse. Treat any residual
marks with bleach.

Ink: depending on the type of ink, m oisten the fabric first with acetone, then with acetic acid . Treat any

residual marks on white fabric s with bleach and then rinse thoroughly.

Tar stain: first treat with s tain remove, methylated spirits or benzine ,then rub with d etergent paste.

Quantity of detergent to be used:

The type and quantity of deterge nt will depend on the type of fabric,load size,degree
of soiling and hardness of the wat er used.
Follow the product manufactu res’ in structions on quantities to use.
Use less detergent if:

you are washing a small load

•

the laundry is lightly soiled

•

•

large amounts of foam form durin g washing.
do not use acetone on artificial s ilk.

•

Degrees of water hardness

Water hardness is classified in so-called «degrees» of hardness. Information on hardness of the water
in your area can be obtained from the relevant water supply company, or from your local authority. If
the water hardness degree is medium or high we suggest you use a water softener, following the
manufactures instructions.
When the degree of hardness is soft, re-adjust the quantity of the detergent.

stains with methylated spirits. Treat any residual

8

First Use

• Ensure that the electrical and water connections comply with the installation instructions.

• Remove any material from the drum.

• Run a cotton cycle at the highest temperature without any laundry in the machine, to remove any

manufacturing residue from the drum and tub. Pour 1/2 a measure of detergent into the main wash
compartment and start the machine.

Personalization

Acoustic signals

The machine is provided with an acoustic device,

• at the end of the cycle

• if there is a fault.

It is not possible deactivate the acoustic signal.

Child safety lock

This device permits you to leave the appliance unattended so you do not need to worry that children might be

injured by or cause damage to the appliance. This function remains enabled also when the washing machine is

not working.

You can activate it as follow:

1.Press button 4 to start the washing programme.

2.Press button 6 + button 7 for three seconds to activate the safety device.

Now, it will be impossible to change any other programme or option.

which sounds in the following cases:

9

Daily Use

Load the laundry

Open the door by carefully pulling the door handle outwards. Place the laundry in
the drum, one item at a time, shaking them out as much as possible. Close the
door.

Measure out the detergent and the fabric softener

Pull out the dispenser drawer until it stops. Measure
required, pour it into the
if the selected

«Detergent dispenser drawer»).

If required, pour fabric softener into the compartment

«MAX» mark in the drawer). Close the drawer gently.

Select the required programme by means of the

Turn the programme selector dial to the required programme.

or anticlockwise.

Turn the selector dial to position OFF to reset the programme or to switch the machine off.

programme the selector dial must be

Important! If you turn the programme selector dial to
machine will not perform the new selected

Select the spin speed by pressing button 7

When selecting a programme, the appliance proposes

programme. (See «Washing programmes» for the maximum allowed spin speed).

Press this button repeatedly to change the spin speed, if you want your laundry to be spun at a different speed.
The relevant pilot light illuminates.

programme/option it requires (see more details in

turned to position OFF, to switch the machine off.

main wash compartment or in the appropriate compartment

marked (the amount used must not exceed the

programme selector dial (3)

The selector dial can be turned either clockwise

another programme when the machine is working, the

programme.

automatically a suggested spin speed for that

out the amount of detergent

At the end of the

Select the available options by pressing button 6

With this button you can select an additional Prewash or an additional Rinse or both.
When this button is pressed, the corresponding pilot light illuminates. When it is pressed again, the pilot light
goes out.

Start the programme by pressing button 5

To start the selected programme, press this button.

operating and the door is locked.

Select the Delay Start by pressing button 10

Before you start the programme, if you wish to delay the start, press this button to select the desired delay.
The selected delay time value will appear on the display for a few seconds, then the duration of the
programme will appear again. By pressing this button, the washing programme can be delayed by 1 hour up to
a maximum of 24 hours.

Select the delay start

1. Select the programme and the required options.

2. Select the delay start by pressing button 10.

3. Press button 5:

- the machine starts its hourly countdown.

- the programme will start after the selected delay has expired.

10

If you have chosen a delayed start, the machine will begin the countdown.

The icon illuminates to indicate that the appliance

starts

Cancelling the Delay Start after having started the programme:

1. Set the washing machine to PAUSE by pressing button 5.

2. Press button 10 repeatedly until the display shows 0'.

3. Press button 5 again to start the programme.

Important!

• The door will be locked throughout the delay time. If you need to open the door, you must first set the
washing machine to PAUSE by pressing button5 and wait a few minutes before opening the door. After you
have closed the door, press the same button again.

Important! The Delay Start cannot be selected with the draining programme.

Altering an option or a running programme

It is possible to change some options before the programme carries them out.

you must pause the washing machine by pressing button 5.
by resetting it. Turn the programme selector dial to OFF and
the new programme by pressing button 5 again.

The washing water in the tub will be not emptied out.

Changing a running programme is possible only

then to the new programme position. Start

.Before you make any change,

Interrupting a programme

Press the button 5 to interrupt a programme which is running.
Press the button again to restart the programme.

Cancelling a programme

Turn the selector dial to OFF to cancel a programme

which is running, and wait few minutes to open the

door (it is possible only if in the tub there is not water).

At the end of the programme

The machine stops automatically. The blinking zero appears on the display.

that ends with water left in the tub has been selected, the door is locked to

If a programme or an option that

indicate that the water must be

emptied out before opening the door.

Follow the below instructions to empty out the water:

1. Turn the programme selector dial to OFF.

2. Select the draining or spinning programme.

3. Reduce the spin speed if needed, by pressing the

relevant button.

4. Press button 5.
At the end of the programme, the door is released, after few minutes, and can be opened. Turn the programme
selector dial to OFF to switch the machine off.
Remove the laundry from the drum and carefully check that the drum is empty. If you do not intend to carry out
another wash, close the water tap. Leave the door open to prevent the formation of mildew and unpleasant
smells.

Stand-By:

1.Once the programme has finished after a few minutes and the energy saving system will be enabled. The
brightness of the display and the indicator pilot lights are off.

2.If the appliance is switch on button in PAUSE, only the brightness of the display is off.

By pressing any button

,the appliance will come out of the energy saving status.

11

Care and cleaning

Warning! You must DISCONNECT the appliance from the electricity supply, before you can carry out any

cleaning or maintenance work.

Descaling

The water we use normally contains lime. It is a good idea to periodically use a water softening powder in the
machine.
Do this separately from any laundry washing, and according to the softening powder manufacturer's
instructions.
This will help to prevent the formation of lime
deposits.

External cleaning

Clean the exterior cabinet of the appliance with soap and water only, and then dry thoroughly.

Cleaning the dispenser drawer

The washing powder and additive dispenser drawer should be cleaned regularly.

Press

1

2

Pull out at the same time

Flush it out under a tap, to remove any traces of

accumulated powder.

3

Clean

Cleaning the drawer recess

Having removed the drawer, use a small brush to clean the recess ensuring
that all washing powder residue is removed from the upper and lower part of
the recess.
Replace the drawer and run the rinse programme without any clothes in the
drum.

12

Cleaning of the filter of the drainage pump

If the ma chine c ann ot w ork nor mal ly or f ilt er n et of t he drai nag e pump can not

be cleaned , p leas efo llo w th e m ethods[ 1] below:

1

Close the water tap

3

If necessary,wait until the water

Empty the water from the pump to a container cautiously .

4

5

Screw the pump cover out and clean t he filter

Install the pump cover

6

has cooled down

2

Disconnect the power plug

Please clean the drainage pump regularly to prevent the sundries blocking the drainage pipe.

If the machine has the emergency drainage

If the machine has the emergency d rainage, please follow the methods below when the
machine cannot work normally :

1

Rotate the programme selecto r dial to OFF(stop) position and to close the water tap.

2

If necessary, wait until th e water has cooled down.

3

Place a container on the floor, pul l out the emergency emptying hose, place i t into the
container.Remove its cap and wa it until the remaining water naturally flows out.

Emergency drainage pipe

Pump co ver

Open the filter's door

Turn the emergency
drain hose cap

Pull out the emergency
emptying hose

Remove the cap

If the machine doesn’t have Emer gency drainage, please follow the methods[1] above .

Cleaning of the inlet water valve

.

If the inlet water time is found to be t oo long, please clean the filter net of the inlet valve.

Screw the inlet water pipe out.

1

Clean with the tool (like the gauz e

2

brush and etc.)

Drainage pipe ferrule

13

Warning!

When the appliance is in use and depending on the programme selected there can be hot water in the pump.
Never remove the pump cover during a wash cycle, always wait until the appliance has finished the cycle,
and is empty. When replacing the cover, ensure it

is securely retightened so as to stop leaks and young

children being able to remove it.

If you wash rugs, it is compulsory to inspect and clean the filter.

Cleaning the water inlet filters
Important!

If the appliance doesn't fill, takes long to fill with water, the starting button blinks yellow or the display (if
available) shows the relevant alarm (see chapter «What to do if...» for more details), check if the water inlet
filters are blocked.
To clean the water inlet filters:

• Turn off the water tap.

• Unscrew the hose from the tap.

• Clean the filter in the hose with a stiff brush.

• Screw the hose back onto the tap. Make sure the connection is tight.

• Unscrew the hose from the machine. Keep a rag nearby

because some water may flow.

• Clean the filter in the valve with a stiff brush or with the
piece of cloth.

• Screw the hose back to the machine and make sure the
connection is tight.

• Turn on the water tap.

Frost precaution or emergency emptied out

If the machine is exposed to temperatures below 0°C or if the water is not discharged, proceed as follows.
1 Pull out the plug from the power socket.
2 Turn off the water tap.
3 Unscrew the inlet hose.
4 Place a bowl on the floor and place the end of the inlet and drain hoses into it. The water should drain by

gravity into the bowl.

14

What to do if.....

Certain problems are due to lack of simple
maintenance or oversights, which can be solved
easily without calling out an engineer.

Malfunction

The washing machine does not work

Water leakage

The spin of the clothes is abnormal

There is the peculiar smell in the
shing machine

No water is visible in the drum

There is the remaining water in the
softener's box

The remaining detergent is left on
the clothes

The washing machine does not fill

wa-

Before contacting your local Service Centre, please
carry out the checks listed below.

Possible Cause / Solution

Close the washing machine's door.

Press the <<S >>button.tart/Pause
Correctly connect the inlet water pipe.

Reload and distribute the laundry evenly in the drum.

Run a Self-clean cycle without any clothes.

No fault-water is under the visible area.

No fault- the effect of the softener will not be affected.

The water-fast component of the non-phosphorus
detergent will be left on the clothes to form into spot.
Please select «Rinse&Spin» programme.
or brush away the fleck after the clothes is dried.

Turn on the water tap.

Check the selection of .the procedure
Check if the water pressure is sufficient.

Reconnect the water inlet pipe.
Close the washing machine’s door.
Check if the inlet water pipe is bent or blocked.

The washing machine fills and drains
at the same time.

The washing machine does not drain

Vibration of the washing machine

15

Make sure the end of the drainage pipe is higher
than the water level inside the machine .
Check if the drainage pipe and waste have been
sealed.

Check if the drainage pumps is blocked.
Check if the drainage pipe is bent or blocked.

Check the height of the drainage nozzle, make
sure it is 0.6-1 meter high from the bottom of the
washing machine.

Level the washing machine.
Fasten the footing.
Check if all the delivery bolts have all been removed.

Malfunction

Foam spills from the detergent
drawer

Possible Cause / Solution

Check if the amount of detergent is excessive,
if it is the specialized detergent for the drum
washing machine.
Dip one scoop of the softener mixed with 1/2 liter
of water to the detergent box II.

Reduce the amount of detergent used next time.

The machine stops when the proce­dure has not been finished

The drainage pump is noisy during
operation after the water has been
drained.

The machine stops for some time
during the wash procedure.

Power failure or water cut.

The water inside the inner barrel has been drained
but there is still a small amount of water in the
drainage pump and pipe. The drainage pump
continuously work and takes in the air, then there
wil be noise which is normal situation.

The washing machine adds water automatically.

There is too much foam in the tube, the foam is
being drained.

Alarm codes

If the washing machine cannot work normally, a alarm code will appear on the display. Please carry
out the following checks.

Display

Reason

Inlet water
overtime

Solutions

Open the water tap, to check if the inlet hose is squashed
or kinked, check if the filter in the inlet valve is blocked or
not; check if the water pressure is too low.

Overtime of
the drainage

The door has
not been closed

Others

Check if the drain pump is blocked (see page 14).

Check if the door of the washing machine is closed.Check
if the clothes are trapped by the door seal.

Try again or contact your local service center if the
problem persists.

16

If you are unable to identify or solve the problem,
contact our service centre. Before telephoning, make
a note of the model, serial number and purchase date
of your machine. The Service Centre will require this
information.

Technical data

)

g)

8mm

48

mm(

kg

(7

g)

6k

595mm

m

m

5

9

4

855mm

(8 k

1

01

9

Rated Mains
Wash power
Spin power
Heat power

Max. Power

Water pressure

Net weight
Drain method
Spin method

Volume

Spin Method

Drain Method

2 0-240 V2 / 50Hz
200W

400W

2000W
2200W

0.02MPa~1MPa
77Kg

Upper drain
Centrifugal

58L

Centrifugal

Upper Drainage

17

Installation

Unpacking the washing machine

Unpack your washing machine an d check if there is any damage during the transportation Also make
sure that all the items in the attac hed bag are received if there is any damage to the washing machin e
during the transportation. O r any item is missing .Please contact the local dealer immediately.

Dispose the packing materials

The packing materials of this ma chine may be dangerous to kids.Please dispose them properly and avoid
easy touch by kids. Please dispo se the related packing materials accor ding to the relevant local
regulations.Please do not throw the packing mater ials according away together with the other daily living
rubbishes.

Remove transport bolts

Before using this washing mach ine,transport bolts must be
removed from the backside of thi s machine .Please take the
following steps to remove the bo lts:

1.Loosen all bolts with spanne r and then remove them

2.Stop the holes with transpor t hole plugs

3.Keep the transport bolts pro perly for future use

Positioning

Please install the washing mas hing on solid and flat ground.
Please do not place the washing ma chine on the cardboard, wood or similar materials
Please do not install the washin g machine outdoors to prevent the washing machine
from frozen to damages in machin e parts.

Connect the inlet hose

Connect the inlet hose as indica ted in the figure

Inlet Hose Installation

1 2

Take out the attached inlet hose.

Approach vertically one end of t he inlet
hose to the spiral tap specially f or the
washing machine.

18

3

4

Screw tight the tap in the
direction of screw thread
of the inlet hose.

When connecting the water hose a nd the water tap, do no t wear the screw.

When connecting the screw thre ad of the inlet hose and the inlet valve, prevent the
screw thread screwed incorre ctly or it will wear or leak.

To avoid the damage caused by the over bending of the inlet hose .

Please check the inlet hose cond itions regularly. Please replace it in time if damaged.

Water drainage

The end of the drain hose can be positioned in three
ways:

Hooked over the edge
of a sink using the

plastic hose guide
supplied with the
machine.
In this case, make sure
the end cannot come
unhooked when the
machine is emptying.

This could be done by
tying it to the tap with a piece of string or attaching it
to the wall.

Connect the hose to the water
inlet at the back of the washing
machine.

In a sink drain pipe branch.
This branch must be above the trap so that the bend
is at least 60 cm above the ground.

Directly into a drain pipe at a height of not less than
60 cm and not more than 90 cm. The end of the drain
hose must always be ventilated , i.e. the inside
diameter of the drain pipe must be larger than the
outside diameter of the drain hose.

The drain hose must not be kinked.

19

Electrical connection

Information on the electrical connection is given on

Check that your domestic electrical installation

account any other appliances in use.

Caution! Connect the machine to an earthed

Caution! The manufacturer does not accept any responsibility for damage or injury through failure to

comply with the above safety precaution.

Caution! Should the appliance power supply

by a Ser vice Cent re

The power supply cable must be eas ily accessible after
installing the machine

the rating plate on the inner edge of the appliance door.

can take the maximum load required, also taking into

socket.

cable need to be replaced, this MUST be carried out

Environment concerns

The symbol on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it should be taken to the
appropriate collection point for the recycling of
electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent
potential negative consequences for the environment
and human health, which could otherwise be caused
by inappropriate waste handling of this product.

For more detailed information about recycling of this
product, please contact your local council, your
household waste disposal service or the shop where
you purchased the product.

Packaging materials

The materials marked with the symbol are recyclable.
>PE<=polyethylene
>PS<=polystyrene
>PP<=polypropylene
>PAP<=paper

Repair and After-sales Service

Repair Guarantee：

1.This product implements the national guarantees. The customer can enjoy the service promised under the
normal usage and maintenance.

2.The company will repair free during the guarantee term if there is any fault or abnormal operation caused by
manufacture quality problems.

3.The user can contact the local service centre if there is any fault or part issueafter the guarantee term. The
local service centre will provide service for you continuously.

4.If the total machine is abnormal，please do not dismantle the parts privately.

20