Page 1
wm80ls / wm80lw
Front Loading Washing Machine
INSTRUCTION MANUAL
:
WWW.CAMPOMATIC.COM
Page 2
contents
Function introduction ……………………………………
Warm Prompts …………………………………………
Safety Precautions ………………………………………
Important Safety Symbols and Precautions…………………………
Read the following contents before using the washing machine …
Installing the Washing Machine …………………………
Unpacking the washing machine……………………………………
Accessories …………………………………………………………
Installation requirements …………………………………………
Power supply and grounding…………………………………………
Water Supply…………………………………………………………
Installation environment requirements……………………………
Ambient temperature ………………………………………………
Removing the shipping bolts………………………………………
Adjusting the levelling feet…………………………………………
Check if the leveling leg is level……………………………………
3
4
5
5
7
9
9
10
10
10
12
12
13
14
15
15
Connecting the water supply hose…………………………………
Positioning the drain hose …………………………………………
Plugging in the washing machine…………………………………
Using the washing machine …………………………………
Washing for the first time…………………………………………
16
17
17
18
18
Page 3
contents
Washing precautions ……………………………………………
Control panel……………………………………………………
Washing a load of laundry …………………………
Inspection and preparation before washing……………………
Laundry that shall not be washed in a washing machine……
Washing tips and hints…………………………………………
Precautions for using the detergent……………………………
Function of each compartment…………………………………
The function of the detergent drawer…………………………
Using liquid detergents………………………………………
Maintaining the washing machine …………………
Drum clean …………………………………………………
Cleaning the enclosure ………………………………………
Cleaning the detergent drawer …………………………………
Cleaning the debris filter ……………………………………
Cleaning the water supply valve filter…………………………
18
19
21
21
23
23
24
24
25
25
26
26
27
28
28
29
Handling a frozen washing machine…………………………
Storing the washing machine…………………………………
Fabric washing label …………………………………………
Troubleshooting ……………………………………
Program Control Board…………………………………………
30
30
31
32
34
Page 4
Service Instructions
Function Features
This new washing machine will completely change your impression on
a washing machine. With a ultra-large washing capacity and excellent
energy-saving and environmental protection performance, the
washing machine is fully equipped with all characteristics that make
your household chores fun.
◆Auto Cotton(Standard)
This program has a unique perceptive function which automatically
perceives the weight of clothes in the course of washing, thereby
selects proper water level to achieve environmental protection and
energy saving.
◆Baby Care
The washing machine is newly equipped with a protection program
designed for baby clothing. Washing at a high temperature of 90℃ can
kill bacteria of the clothing effectively and fully dissolve the detergent,
thereby reducing irritation to children`s skin. Note: only this program
has the prewash function.
◆Wool
Confirm that the fabric can be washed by the machine according to the
washing label on the clothing and wash it as per the instructions on the
wool washing program of the machine provided by the manufacturer.
◆Drum Clean
This function can keep the inner drum clean. The Drum clean program
can achieve satisfactory washing effect without use of chemical
detergent. With the unique cleaning program, pour water into the
drum and heat to 70℃, the hot water will scour the inner surface by
high speed revolution, and the inner drum will be cleaned with odor
eliminated. The program can remove the potentially bred mould and
bacteria inside the drum which will lead to peculiar smell and fading of
the clothing if retaining in the drum for a long time.
Page 5
Service Instructions
Warm Prompts
This user manual covers important information including
installation, application and maintenance of the washing
machine. Please read the manual carefully for proper use and a
longer service life of the washing machine. The manual can help
you be familiar with the operation panel, understand how to use
the washing machine or how to take full advantage of the artistic
features and functions. In addition, you can handle the problems
arisen of the machine by reference to “Troubleshooting” on
page 32.
Page 6
Service Instructions
Safety Precautions
Please read the instructions carefully before using the product, please
safekeeping.
Throughout this manual, you’ll see “Warning” and “Caution” notes.
These warnings, cautions and subsequent prompts of important safety
instructions do not cover all possible conditions and situations that may occur.
Please read the instructions carefully and perform operation with caution and
care when installing, maintaining and operating your washing machine to
make the most of functions and extend the service life of the machine. We are
not liable for damages resulting from improper use.
Important Safety Symbols and Precautions
Meanings of icons and symbols in this manual:
WARNING: Hazards or unsafe practices that may result in severe
personal injury, death or property damage.
CAUTION: Hazards or unsafe practices that may result in personal
injury or property damage.
To reduce the risk of fire, explosion or personal injury when using
your washing machine, follow these basic safety precautions.
Do NOT try.
Do NOT disassemble.
Do NOT touch.
Read the manual carefully before use and perform operation with
caution and care.
Unplug the power supply after use.
Ensure the washing machine is grounded effectively to prevent
electric shock.
Call the Jide customer service center for electric appliance if
you have any consultation or suggestions.
Attention.
Page 7
Service Instructions
Important Safety Symbols and Precautions
Read the manual carefully and perform operation with caution and care.
There exists potential hazard when an electric appliance is being
operated. Read the manual carefully and perform operation with caution
and care when operating the wash machine in order to guarantee safety.
Install the washing machine in a dry and ventilated room rather than in a
bathroom or a wet room.
Position the washing machine on a hard, flat and clean surface without
any water or oil.
The specification of the power plug shall comply with the requirements of
electricity load current. Use the 220V AC power supply alone with reliable
grounding.
To prevent the risk of fire, explosion or personal injury when using your
washing machine:
◆ Do not wash the soaked clothing stained with gasoline or other flammable,
explosive and toxic solvent, for the clothing aforesaid will release the substance that
may cause fire or explosion. Wash the clothing aforesaid manually first, and ensure
that all those liquid, solid and particle traces are removed before putting it into the
washing machine. Hazardous substances include acetone, alcohol, gasoline,
kerosene, certain liquid household cleanser and detergent, turpentine, wax and wax
remover.
◆ Do not use the strong acid cleanser.
◆ Do not put gasoline, alcohol, dry cleanser or other flammable and explosive
substances into the washing machine as detergent.
◆ Select the household detergent available on the market and applicable to machine
wash only.
In case of gas leak, ventilate the room immediately and do not touch the
power plug.
Before carrying out maintenance, be sure to unplug the washing machine
and turn off the water faucet of water supply hose.
Before you open the door of the washing machine, check if the drum has
been drained. Do not open the door if you can still see water.
Use the new water supply hose for connection to the water faucet. The old
hose should not be reused and be replaced with new ones regularly.
The water supply hose will degrade over time. Check the expansion, kink,
breakage, wear and tear as well as the leak of the hoses periodically, and
replace them promptly when there is something wrong, at least every five
years.
Page 8
Service Instructions
Important safety symbols and precautions
Packing materials can be dangerous to children; keep all packing
materials (plastic bags, polystyrene, etc.) well out of the reach of children.
All packaging and shipping bolts must be removed before the washing
machine is used. Otherwise, excessive vibration and noise may occur
when operating the washing machine, causing serious damage to the
machine. See “Removing the shipping bolts” on page 14.
Read the following contents before using the washing machine
Before washing clothes for the first time, you must run a complete cycle
without clothes. See “Washing for the first time” on page 18.
Wash the residue in the debris filter frequently. See “Cleaning the
debris filter” on page 28.
Make sure that the pockets of all clothing to be washed are empty.
Hard, sharp objects, such as coins, safety pins, nails, screws or stones
can cause serious damage to the washing machine.
Do not wash the clothing with hasp or other heavy metals.
Before you open the door of the washing machine, check if the water
has drained. Do not open the door if you can still see water.
Pets and children may climb into the washing machine. Check the
washing machine before each use.
The glass door may become very hot during the washing cycle. Keep
children away from the washing machine while it is in use.
Page 9
Service Instructions
Read the following contents before using the washing machine
This washing machine is designed for home use only and only the cold tap water
is allowed for use.
Make sure that water pipe and electrical connections are made by qualified
technicians according to the manufacturer’s instructions (see “Installing the
Washing Machine”) and local safety regulations.
Please unplug the washing machine before performing maintenance, cleaning or
repair.
Always unplug the washing machine and turn off the water supply faucet after use.
Do not connect the power supply if the washing machine has obvious damage
before the first use. If you have any questions, contact with the local product and
service agent or dealer.
Do not attempt to repair the washing machine by yourself. Repairs made by
inexperienced or unqualified persons may make more serious damage to the
washing machine and cause personal injury.
This washing machine should only be serviced by an authorized service center,
and only genuine spare parts should be used.
This appliance is not intended for use by children above 8 years old, persons
with physical defect, sensory handicap or mental deficiency and persons with
insufficient relevant experience and knowledge unless they have been
adequately supervised or guided by a responsible person and understand the
potential hazards to ensure that they can use the appliance safely. Children
should be supervised to ensure that they do not play with the appliance and that
cleaning or maintenance of the appliance can be carried out as scheduled.
In order to use the washing machine safely, the user shall be familiar with and
understand the contents in this manual and use it with caution and care.
Do not use processed water containing oil, cream or lotion.
� Otherwise, this will cause the seals to be deformed, which causes a
malfunction or water leakage. A stainless inner drum does not usually rust.
However, if some metal such as a hair pin is left in the drum for an extended
time, the drum could rust.
� If rust starts appearing on the surface of the inner drum, apply a cleanser
(neutral) to the surface and use a sponge or soft cloth to clean it. (Under no
circumstances use a metal brush).
� Do not leave water or bleach containing chlorine in the drum for an extended
period of time.
Page 10
Service Instructions
Read the following contents before using the washing machine
The door of the washing machine cannot be opened from the
inside, thereby keep the playing children (or pets) away from the
washing machine; if they are trapped in it, serious injury may
occur.
This washing machine is not applicable for infirm persons or
persons (including children) with insufficient relevant knowledge
and experience.
Inform your children that the washing machine cannot be played.
The washing machine shall be positioned in the room that the
socket, water faucet and floor drain (drainage channel) are
accessible.
Installing the Washing Machine
Strictly observe the relevant installation procedures in the manual to
ensure that you use the washing machine safely.
Unpacking the washing machine
Unpack your washing machine and inspect it for shipping damage.
Also make sure that you have received all items shown below. If the
washing machine was damaged during shipping or you do not have all
items, contact your dealer immediately.
Page 11
Unpacking the washing machine
Service Instructions
BODY-PLATE
DETERGENT DRAWER
PANEL-CONTROL
ASSY-DOOR
ADJUSTABLE LEG
ASSY-TUB&DRUM
Accessories
Wrench
(optional)
(1)
WATER SUPPLY HOSE
Dispose the proper packing materials as per relevant local regulations. Do not litter
the packing materials of the machine with other household garbage.
(1)
USER MANUAL
(1)
COVER-FILTER
DRAIN HOSE SUPPORT
(1)
ASSY-TOP LID
POWER PLUG
DEBRIS FILTER
SCREW
COVER-BOTTOM
(4)
HOSE DRAIN
(1)
Installation requirements
Power supply and grounding
To avoid the unnecessary risk of fire, electric shock or personal injury,
all electrical circuit and grounding must be set as per the national
electrical standard. It is the owner’s responsibility to provide proper
maintenance on the electrical appliance.
Do not overload the wall power socket or the extension cord. Otherwise, it may cause
fire and electric shock.
Only the power cord equipped with the washing machine can be used.
Page 12
Service Instructions
Power supply and grounding
When ready for installation, ensure the power supply complies with the
following items:
◆ Fuse or breaker of 220V, 50Hz, 15A.
◆ When the heating function is used, the maximum current of the washing machine may
reach 10A. Ensure that your power supply unit (current, voltage and cable) can meet the
normal load requirements of the appliance.
The washing machine must be grounded. If the washing machine has a
fault or cannot run normally, the current can be conducted to the
ground, minimizing the risk of electric shock.
Grounding
To guarantee your safety, use the three-core socket and check to
ensure it is grounded accurately and reliably. (The washing machine
has been equipped with a three-core socket.)
Protect the power cord.
The power cord has to be positioned so that it will not be stepped
on, pressed or clamped by the article on or next to it. Pay special
attention to the power cord of plug, socket and power cord
The ground wire cannot be connected to the plastic pipe, gas conduit
or hot-water pipeline. If the ground wire is connected to the improper
ground conductor, electric shock may occur.
Page 13
Service Instructions
Power supply and grounding
If you are not sure whether the washing machine is grounded
accurately, check and verification should be performed by service
agent or qualified person.
If the power cord is damaged, replacement should be conducted by the
product and service agent or qualified person to avoid risk. The plug
attached to the washing machine cannot be transformed. If the plug
cannot match the socket, a suited one should be installed by
theproduct and service agent or qualified person.
Water Supply
The working water pressure of the washing machine is 50KPa~800KPa.
When the water pressure is below 50KPa, the water supply valve may
not work normally, or the time of water supply is longer than that of
program control, and the display screen shows “SF”.
The water supply faucet must be less than 122cm away from the rear of the washing
machine so that the water supply hose can be easily connected to the washing
machine and the water faucet.
To prevent the risk of water leakage and waterway damage, consider the following
ways:
◆ The washing machine shall be close to the water faucet.
◆ Turn off the water faucet when the washing machine is not used.
◆ Check water leakage conditions of the internal loop regularly.
Before using the washing machine, first check all connections of the
water supply valve and water faucet to prevent water leakage.
Installation environment requirements
Ground location
To make the most of the washing machine, position it on a hard, level
and clean surface without any water or oil. If the surface is uneven or
not clean, noise or vibration may occur.
Page 14
Service Instructions
Installation environment requirements
To minimize the vibration or unbalanced load, the wood floor has to be
reinforced. The carpet and the soft floor tile surface may cause
vibration and slight movement of the washing machine in operation.
Before you install the washing machine, select a location with the
following characteristics:
◆ Do not position the washing machine on a platform or a structure with weak
support.
◆ A hard, level surface (if the surface is uneven, see “Adjusting the leveling leg” on
page 15).
◆ Avoid direct sunlight, with adequate ventilation. (The washing machine shall not be
installed in a bathroom or a wet room.)
◆ Room temperature shall not fall below 0℃.
◆ Away from sources of heat such as coal or gas stove.
Make sure that the washing machine does not stand on its power cord.
Ventilation openings must not be obstructed by carpeting when the
washing machine is installed on a carpeted floor.
Ambient temperature
The washing machine cannot be positioned in a place where water
freezes easily, because some water may be left in the water valve,
drainage pump and water pipe. Freeze in the pipeline may cause
damage to the belt, drainage pump and other parts.
Your washing machine should be positioned in the environment with
ambient temperature of 0℃~40℃ and relative air humidity below 95%
(when the temperature is 25℃), thus the washing machine can be used
in a convenient and safe way.
Installation in a limited space
For safe and proper operation, the space for positioning your washing
machine should be:
Two sides – 25 mm (1 in)
Back – 51 mm (2 in)
Top – 25 mm (1 in)
25mm
25mm
51mm
Page 15
Service Instructions
Removing the shipping bolts
Before using the washing machine, you must remove all shipping bolts
from the back of the appliance. To remove the bolts:
1.Loosen all bolts with the wrench.
2.Take each bolt head and pull it out from
the loose hole. Repeat for four shipping
bolts.
3.Fill the holes with the supplied covers
at the rear of enclosure.
Packing materials can be dangerous to children; keep all packing
materials (plastic bags, foamed plastic, shipping bolts, etc.) well
out of the reach of children.
Take out the power plug from the T-shaped hole on the back
enclosure of the appliance.
4.Keep the shipping bolts for future use.
Page 16
Service Instructions
Adjusting the levelling feet
If the floor is uneven, adjust the leveling leg of the washing machine
(do not insert pieces of wood or any other objects under the leg):
1.Turn left to loosen the leg bolt with
the wrench.
Wrench
Leg bolt
Leveling leg
2
.
Adjust the leveling leg until it is at the desired
height, turn left for higher, and turn right for
lower.
Adjust the leg higher
3.Tighten the leg bolt with the wrench. 4.Adjust the four leveling legs as needed.
Wrench
Leg bolt
When you tighten the leg bolt with the wrench for fixation and
adjustment, avoid movement of the leg.
Check if the leveling leg is level
Leveling leg
The washing machine is level when four legs do not shake relative to the ground.
The steps you can follow:
1.
Press the two diagonal corners at the top of
the washing machine with your hands to check
if the washing machine still shakes.The two
diagonals have to be checked.
2.If the washing machine still shakes, the leg
must be readjusted.
Page 17
Service Instructions
Connecting the water supply hose
Connection and installtion methods are as follows:
1.
Connect the L-shaped mounting arm for the cold water supply hose
to the cold water supply valve on the back of the washing machine.
Tighten by hand.
The water supply hose must be connected to the washing machine at one
end and to the water tap at the other. Do not stretch the water supply hose.
If the hose is too short,replace the hose with a longer, high pressure hose.
2.Connect the other end of the cold water supply hose to your sink’s
water faucet and tighten it by hand. Use the special faucet of the
washing machine.
Turn on the water faucet and check if there is water leakage at the joint of the
water supply hose before positioning and using this appliance.
If there is water leakage, repeat the steps aforesaid.
Page 18
Service Instructions
Positioning the drain hose
The end of the drain hose may be positioned in three ways:
1.In a floor drain directly
We recommends that you shall use the drain hose attached to the
appliance; it can be directly inserted into the floor drain with the width
of the trough entry not less than 4 cm.
2.In a sink drain hose branch:
The end of the drain hose is connected to a sink drain hose branch. If
the hose is too long, it cannot be forced into the washing machine,
otherwise abnormal noise may occur. Note: the width of the sink entry
shall not less than 4 cm.
3. Over the edge of a wash basin:
The end of the drain hose must be placed at a height of between 60 and
90 cm from the ground. To avoid the influence of the drain hose
bending on water flow, secure it over the edge of the wash basin with a
hook or a piece of string to prevent the drain hose from moving.
Note: the end of the drain hose cannot be immersed in water.
Min. 4cm
Min. 60cm
Max. 90cm
Max. 90cm
Plugging in the washing machine
Plug the power cord into a wall socket which must be a qualified AC
220V/50Hz socket protected by a fuse or a circuit breaker.
Test run
After completing the installation of the washing machine, run the “Rinse +
Spin” program to ensure proper installation.
Page 19
Service Instructions
Using the washing machine
Washing for the first time
Before washing clothes for the first time, you must run a complete cycle
without clothes.
Steps:
1. Press the Power button.
2.Pour a little detergent into the detergent drawer .
3. Turn on the water supply faucet of the washing machine.
4. Press the Start/Pause button.
This will remove any water remaining in the machine during the
manufacturer’s test run.
Washing precautions
1.Put your laundry to be washed piecemeal loosely in the washing
drum.
Do not load excessive laundry. As for the max weight of each type of laundry, please see
“Washing tips and hints” on page 23.
� Make sure no laundry will be clamped by the machine door when closing the door,
otherwise water leakage will occur.
� Detergents may remain on the front seals of the washing machine if excessive detergents
are poured; Please clear away residual detergents.
� Do not touch the glass of the machine door during operation, or you may get scalded.
� Do not open the detergent drawer or debris filter during operation, or you may get scaled
by hot water or steam.
Liquid detergent accessory
2.Close the door of the washing machine and make sure the door is
safely locked.
3.Add appropriate amount of detergents and additives (option) into
the detergent drawer.
4.Press the Power button .
5. Select proper washing program. The indicator light will be on and the
control panel displays remaining washing time.
6. Press the Start/Pause button.
Page 20
Control panel
Overview of the control panel
Service Instructions
8kg 1000rpm
POWER
Power
Quick wash Cotton
Baby care
Denim
Hand wash
Spin
Rinse+Spin
Program knob
By rotating the program button,
can choose the washing mode
you need.
Synthetics
Drum clean
Bedding
Wool
Intensive
My Program
Delay Rinse+ Temp. Spin
Capacity and max speed
Display screen
start / pause、Rine+、Temp.、
Spin button，and washing time
display
Function introduction of each part:
Power
Press this button to turn on or turn off the washing machine.
If the machine is in idle for 10 minutes when plugged in, the power will be
auto off.
Program knob
Rotate the knob to select one washing program from the 12 optional
programs. Standard, Bedding, Intensive, Baby care, Rinse + Spin, Drum
clean, Hand wash, Quick wash, Denim, Wool, Synthetics and Spin.
※ Auto Cotton – suitable for washing generally or slightly soiled cotton textiles, linen bed sheet,
linen table cloth, underwear, towels, shirts, etc.
※ Bedding – suitable for washing bedspread, bed sheet, quilt cover, etc. The best washing effect
can be achieved when only washing one kind of beddings less than 2.0kg.
※ Intensive – suitable for washing moderately or heavily soiled cotton textiles, linen bed sheet
and table cloth, underwear, towels, jeans, overalls, etc.
※ Baby care – detergents on baby’s laundry can be dissolved completely at high temperature
so that baby’s soft skin can be protected.
※ Spin – execute spin program only to spin spare water from the laundry.
※ Rinse + Spin – suitable for the laundry that needs rinsing only or that needs rinsing again with
softeners.
※ Drum clean – suitable for cleaning inner drum. This program can remove dirt and bacteria
from the drum.
※ Hand wash – a washing program as soft as hand wash.
Page 21
Service Instructions
Control panel
※ Wool – suitable for washing wools that are machine washable with the weight no more than
2.0kg
※ Quick wash – suitable for washing slightly soiled laundry that is worn only once or needs
washing a little, has a special smell.
※ Denim – can wash such laundry better with thick fabric as jeans and protect the fabric,
prolonging life span.
※ Synthetics – suitable for moderately or slightly soiled laundry that is made of chemical fiber,
nylon or other similar blending fabric, such as jacket, pants, shirts, etc.
「Wool」program washes the laundry by light rolling. During washing, constant light
rolling and soaking can prevent wool fiber from shrinking and deforming, achieving the
results of ultra soft cleaning. Neutral detergents are recommended for the program to
achieve the perfect washing results and effectively protect wool fiber.
Delay
Press the button repeatedly to cycle through the available delay options (from
3 hour to 19 hours in one hour increments). The washing cycle will be finished
in the delay hours.
Setting method of the preset time:
1. Select a washing program according to the type of clothes you are washing.
2. Press the Delay button repeatedly to select your deslay preset time.
When the time for your selected washing program is more than 3 hours, the delay time shall be set to more than 3
hours.
Press the button for the first time, displaying “3:00” and the time can be set to “19:00” at most in one hour
increments. Continue pressing, the time will increase automatically.
3. Press the Start / Pause button. The delay indicator will light, and the clock will begin counting down
until it reaches your finish time.
If the delay time is set to 6 hours, the washing program will be finished completely after 6 hours.
delay
Cancellation method: press the Power button, this function will be inactivated.
Note:
1.the delay time can be 3 to 19 hours, not less than 3 hours.
2.The delay function is unsuitable for clothes that are easy to produce static electricity.
3.Set the delay time at first, then press the “Start / Pause” button to display the remaining time.
1. Press the Preset button, time displaying“3:00”;
2. Continue pressing the Preset button three times
in succession, time displaying “6:00”;
3. The washing will be finished 6 hours later.
Temp.
Press the button repeatedly to cycle through the appropriate water
temperature: cold, 30℃, 40℃, 60℃ and 90℃).
Page 22
Service Instructions
Using the control panel
Rinse+
Press the button repeatedly to select the appropriate rinse times, five times at most.
Start / pause
Press the button to start or pause the washing program.
My Program
After selecting this function, you can design at will any one common or special washing
program, which will be memorized. When you are washing the same type of laundry
again, the memory function will provide you with the great convenience (setting
according to the water temperature, spin speed and degree of soiling, etc.). The saved
program setting can be tuned out and used by pressing My
Setting method of My Program:
1.Turn on the water supply faucet.
2. press the power button to start the washing machine.
3. Rotate the Program knob to select your desired washing program.
4. Set all options after selecting the program.
5. Press and hold down My Program button for 3 seconds to save your washing program and
all option settings.
Rotate the Program knob Set all options
Select your desired washing program Set rinsing times, washing time, spin, etc.
Program
My Program
button.
Press and hold down this
button for 3 seconds
When you wash the same type of laundry next time, you just need to press
My Program button, the saved washing program and all option settings will
be automatically selected.
You can repeat the above processes to modify settings of My Program.
Note:
1.When you select My cycle, the settings used last time will be selected.
2.Press and hold down My
setting saved last time will be displayed.
3.Press and hold down My
program and option setting will be saved and the LED light will be twinkling for
3 seconds.
Program
Program
button for 3 seconds, the program and option
button for 3 seconds or above, the current
Washing a load of laundry
Inspection and preparation before washing
To prevent the fault of washing machine and the damage to laundry, you have
to pay attention to the following items.
Page 23
Service Instructions
1. Take objects out from the pocket.
◆ Please check and empty the pockets of the laundry. Such hard objects
as decorations and coins may damage the washing machine or result in
abnormal fault.
2.You had better wash such easily soiled parts as white stockings,
collars, cuffs in advance.
◆ You had better wash such easily soiled parts as cuffs, collars and
pockets with a brush before machine washing.
◆ Please use powder or liquid detergents. Soap residues may remain in
the seams of the clothes or in the washing drum when washing with soaps.
3.Small articles such as underwear must be washed in the designated
and standard washing mesh.
◆ Underwear with metals should be washed in the designated fine
washing mesh to prevent the metal from rupturing through the
underwear to damage the laundry and inner drum.
◆ Small articles such as stockings are recommend to be washed in the
washing mesh (bought by yourself) to prevent them from falling into the
door slot.
4.Clean dust, sludge and hairs of the pet attached on the laundry.
◆ Friction of dust and sludge with the laundry may damage the clothes
and affect washing results.
5.Before washing the laundry, take off the metal decorations and zip
up the laundry, buckle the collar, then turn over the laundry.
◆ Before washing jeans and overalls with such hard objects as zippers
and buttons, the buttons shall be buckled. Winter jacket, overalls,
bedspread, jeans etc. shall be washed separately.
◆ Clothes shall be straightened out before putting into the washing
machine; curtains with hooks shall be washed after the hooks are taken
off. Laundry with buttons or embroidery shall be washed after the
laundry is turned over.
◆ Please take off the decorations on the clothes before washing since
they may damage the laundry. All kinds of belts shall be properly tied
since they may twine other laundry.
6.Cottony laundry shall be turned over before washing.
◆Cottony laundry shall be turned over and washed separately, or other
laundry may be stained with dust, thread ends, etc.
◆ Before washing, please check that if black laundry and cottons are
turned over and washed separately since they are easily stained with
thread ends of different colors when washed together.
Page 24
Service Instructions
7. Before washing, please confirm if there are stains on the laundry.
◆ Do not place the laundry in the washing machine for a long time since they
may get mildew and stains.
◆ Confirm if the laundry washed for the first time are fading. Wipe the
inconspicuous tails of the laundry with a white towel stained with detergent to see
if the towel is dyed with the color of the laundry.
Inspection and preparation before washing
8. To protect the skin of the baby:
◆ Baby’s laundry (baby’s clothes and towels) such as diapers shall be
washed separately. Try to avoid washing with the laundry of adults.
Laundry that shall not be washed in a washing machine
◆ Clothes that may deform in the water: such as wrinkled and embossed laundry. Items
easily deformed include cottons, wrinkled silks, fur articles and leather decorations.
◆ Clothes that may shrink or fade badly in the water, such as tie, underwear, suit,
windbreaker etc.
◆ Clothes with ornaments, long dresses and traditional costumes that fade easily.
◆ Do not wash clothes without fabric labels or washing requirements.
◆Laundry stained with chemicals, such as gasoline, petroleum, benzene, cinnamon water,
alcohol etc., are prohibited to be washed.
Washing tips and hints
Your laundry will be washed with the best results as per the following
hints.
Check the labels on the laundry and sort your laundry according to the
following characteristics.
※ Type of fabric care label: Sort laundry into cottons, blended fabrics, synthetics, silks, wools
and artificial fibers etc.
※ Color: Divide into whites and colors. Wash white and colored items separately.
※ Size: Placing items of different sizes in the same load will improve the washing effect.
※ Rub fastness: Wash delicate items separately, using the “Wool” wash program for new
pure wool, curtains and silk articles.
※ Determining load capacity: Do not overload the washing machine, or your laundry may not
wash properly.
1.When the laundry is unbalanced in the drum, please relocate the
laundry.
2.Washing duvet will increase the washing time or reduce the rotating
efficiency of the drum. The washing weight of less than 2.0kg is
recommended for duvet.
Page 25
Service Instructions
Precautions for using the detergent
The amount of detergent is based on the water hardness in your area
and the detergent manufacturer’s recommendations on the package
as well as the weight of laundry, theype of fabric, the degree of soiling
etc.
The type of detergent you should use is based on the type of fabric
(cotton, delicate items, chemical fiber and wool), color, wash
temperature, degree and type of soiling. Always use “low foam”
washing powder, which is designed for drum washing machine.
◆ Keep detergents and additives in a safe, dry place out of the reach of children.
◆ Please use appropriate amount of detergent according to the type of fabric and the degree
of soiling for the sake of environmental protection.
◆ Appropriate amount of detergent shall be used according to the weight of laundry, the
degree of soiling and product description.
◆ Detergent shall be put in the depth of the detergent drawer which shall not be opened
frequently when the program starts and water is supplying for fear of detergent residual to
influence the washing results.
◆ Softeners shall not be placed on the laundry directly but in the detergent drawer. During
the last rinsing, softeners in the detergent drawer will be poured automatically.
Tips for using “Wool” program:
◆ Use neutral detergent designed for wool washing.
◆ Washing powder particles will remain on the laundry if used to damage
wool.
Using methods of detergents and additives
Function of each compartment
Prewash drawer
Main wash drawer
Softener drawer
Main wash drawer
（Washing powder）
（Washing powder or liquid）
（Softener）
Prewash drawer
Softener drawer
Do not open the detergent drawer during machine operation.
Page 26
Service Instructions
The function of the detergent drawer
1. Open the detergent drawer.
2. Pour appropriate amount of washing powder in the detergent drawer before
the washing program begins.
When using liquid detergent, please put the liquid detergent accessories into the detergent
drawer as shown in the following picture:
Liquid detergent accessories
B
A
◆ Do not put in liquid detergent accessories when using washing powder.
3.If you want to use softeners, please put them in the detergent drawer.
Do not put powder or liquid detergents in the softener drawer .
When using liquid detergents, please
put the liquid detergent accessories
in the Site B from Site A.
（Powder or liquid）
（Softener）
4.If you select the program with the pre-wash function (baby care), please put
a little washing powder in the detergent drawer and appropriate amount
of washing powder in the main wash drawer .
Prewash drawer
Washing powder in the prewash drawer can clean
part of dirt on the laundry, then washing powder or
liquid in the main wash drawer can clean the laundry
at a deeper level to save the detergents.
Do not use excessive washing powder
Using liquid detergents
When using liquid detergents, please put the liquid detergent
accessories in the main wash drawer, then pour the liquid detergents
in the plastic box contained with liquid detergent accessories.
Page 27
Service Instructions
Using liquid detergents
Liquid detergent accessories
B
A
When using the liquid detergents, put the detergent accessories in site B.
◆The amount of liquid detergents shall not
exceed “MAX” base line.
“MAX” base line
◆Please take out liquid detergent when does
not need these accessories during washing
with washing powder.
Maintaining the washing machine
Keep the washing machine clean to enhance the performance, avoid
unnecessary maintenance and increase the service life.
Drum clean
This is a drum auto clean program and can remove the possibly bred
mould in the drum.
1. Turn on the water supply faucet.
2. Press the Power button to start the
washing machine.
3. Rotate the Program knob button to select
the Drum clean program.
◆ The water temperature for Drum clean program is 70 oC and you cannot change the temperature.
4. Put appropriate amount of cleansers in the detergent drawer and close the
detergent drawer. When you need to use cleansers to clean the inner drum:
◆ Be sure to use the specialized cleansers to clean the inner drum.
◆ There are powder and liquid cleansers to clean the drum. The liquid cleansers are recommended
to be put in the plastic box of liquid detergent accessories.
Page 28
Service Instructions
Drum clean
5.Press Start/Pause button to start the Drum clean program.
◆ The drum can be cleaned without cleansers for the Drum
clean program.
◆ The Drum clean program cannot be used when there are
clothes in the washing machine, or the laundry or machine may
be damaged.
◆ Ordinary detergents cannot be used for the Drum clean program.
◆ Only one tenth of drum cleanser amount recommended by the manufacturer shall be used for the
sake of environmental protection.
◆ Bleach containing chlorine may fade the laundry; be sure to use oxygen bleach only.
◆ Powder cleanser: Please use powder bleach or the cleanser specialized for the inner drum of the
washing machine.
◆ Liquid cleanser: Please use liquid oxygen bleach or the cleanser specialized for the inner drum of
the washing machine.
Smart drum clean reminder: When the Drum clean program light near the knob is
flicking during washing, it means the drum needs cleaning. The user can start the
Drum clean program to maintain and clean the washing machine and the reminder
will disappear automatically if finished; if the user won’t start the Drum clean,
the reminder will disappear after 4 times and will appear again in the next
maintaining cycle. This function does not affect the normal use by the user. To
better maintain your washing machine, you are recommended to run the Drum
clean program on a periodic basis as per the warning function.
Cleaning the enclosure
1. Wipe the washing machine enclosure, including the control panel, with a soft cloth and
nonabrasive household detergents.
2. Use a soft cloth to dry the enclosure.
3. Do not pour water on the enclosure in case parts of the machine would be damaged.
Before cleaning the washing machine, the machine shall be unplugged.
Page 29
Cleaning the detergent drawer
Service Instructions
1. Press the release lever on the inside
of the detergent drawer and pull it
out. Then remove accessories from
the drawer.
release lever
3. Reinsert the accessories and replace the detergent drawer into the recess;
make sure that the drawer is pushed back into place.
2. Wash all recesses under running
water and clean the drawer and
recesses with a small brush.
Cleaning the debris filter
Before cleaning and maintenance, please pull the power cord out from the socket.
Cleaning the debris filter 5 to 6 times a year and once every month is recommended;
or when you see the “_F” error message on the display, clean the filter.
1. Open the bottom baffle of the washing machine.
2. Unscrew the debris filter by turning left and drain off all the water.
3. Wash any residue and stain from the filter and make sure the inside of the
drain pump is not blocked.
② ③
Page 30
Service Instructions
Cleaning the debris filter
4. Replace the debris filter in situ.
5. Install the debris filter by rotating right and replace the bottom baffle.
④ ⑤
Don’t unscrew the debris filter when the machine is in operation or
when hot water is flowing out.
◆ Make sure the filter is replaced into the machine when the cleaning is finished.
Otherwise, fault or water leakage may occur.
◆ Make sure the filter is assembled in place.
Cleaning the water supply valve filter
You should clean the supply valve filter at least 3 to 4 times per year,
or when you see “SF” error message on the display:
1. Pull out the power plug and turn off the water supply faucet of the washing
machine.
2. Unscrew the water supply hose from the back of the machine.
3. With a pair of pliers, gently pull out the water supply valve filter from the
valve connector and rinse it under water until clean. Also clean the inside and
outside of the threaded connector.
4. Push the filter back into the original place.
5. Reconnect the water supply hose.
6. Turn on the faucet and make sure the connections are watertight.
Page 31
Service Instructions
Handling a frozen washing machine
If the temperature drops below 0℃ and your washing machine is frozen, you
can:
1. Unplug the washing machine.
2. Wrap up the faucet with the towel soaked in warm water and pour warm water on it to
unfreeze the water supply hose.
3. Remove the water supply hose and soak it in warm water.
4. Pour warm water into the washing machine drum and let it sit for 10 minutes.
5. Reconnect the water supply hose to the water faucet and check if the water supply and
drain operations are normal.
When using the washing machine again, please make sure that the
ambient temperature is above 0 ℃
Storing the washing machine
If you need to store your washing machine for a long time, please drain the
residual water out from the machine. Otherwise, the residual water will remain
in your washing machine for a long time and damage your machine.
1. Select the Spin program to drain the water out with the fastest speed.
2. Turn off the water faucet and separate the water supply hose.
3. Unplug the washing machine and open the machine door to allow ventilation.
Page 32
Fabric washing label
Service Instructions
Wash
Conventional washing machine
Hand wash
Cannot be washed
Washing Bleaching Ironing Dry-clean Dry
Wash
Water temp. shall not above 60℃,
conventional wash
Washable machine
Water temp. shall not above 40℃
Can be bleached
Use bleach with chlorine
Can be ironed
Ironed on cloth Steam ironing
Ironed at a low
temperature
Dry clean
Including drying
Clean with granite-wash or
fluoride dry cleaning solvent
Lower moisture
Wash
Water temp. shall not above 40℃,
weak wash
Non-washable machine
Cannot be bleached
Cannot use bleach with chlorine
Can use bleach with oxygen
Cannot be ironed
Ironed at a medium
temperature
Do not dry clean
Clean with granite-wash,
fluoride, PTEE and TCA dry
cleaning solvent
Dry clean with a
short time
Wash
Water temp. shall not above 40℃,
washing at medium speed
Ironed at a high
temperature
Can be cleaned with
all dry cleaning solvent
The line below means careful
dry cleaning
Dry clean at a low
temperature
Dry with drum
Twist lightly
Can be hung to dry
Hang to dry in a shade place
Drip dry
Cannot be dried
Cannot be twisted to dry
Dry flat
Dry flat in a shade place
Tile to dry naturally
Do not dry under
sunshine
Hang to dry
Dry in a shade place
Page 33
Troubleshooting
Problems and Solutions
Phenomenon Solution
the detergent drawer after
the washing is complete
The pre-wash detergents in the
detergent drawer do not flow into
the drum
Washing machine vibrates
or is too noisy
◆ Check if the water pressure is sufficient when washing.
◆
Check if the detergents are put in the injection port of the detergent drawer.
◆ Check if the washing powder are damp and caking.
◆ Check if the washing program with the pre-wash function is selected.
◆ Check if the washing machine is set on an uneven surface. If the
surface is uneven, adjust the leveling leg to level the appliance.
◆ Check if the shipping bolts are removed.
◆ Check if the washing machine is touching any other objects.
◆
Check if the laundry load is balanced in the inner drum of the washing machine.
Service Instructions
The displayed washing time deviates
from the actual washing time
The drainage pump has
abnormal noise
◆ There is deviation in the weight of laundry, watery supply time
and balancing time.
Check if the drainage pump filter is blocked by laundry flocks and
◆
clean the debris filter timely to kill the noise.
Error messages description
Error code
Code description
dF
SF
_F
LF
uF
bF
CF
HO
PF
Abnormal door lock
Abnormal water supply
Abnormal draining
Extreme low water level with
standard watering times
Imbalance alarm
Button stuck
Abnormal communication
between computer board and
frequency conversion board
Overtop water temperature
for above 5 seconds
Water level sensor abnormity
◆ Check if the door is opened and make sure the door is closed firmly.
◆ Whether the wiring harness of the computer board falls off.
◆ Check if the water supply faucet is turned on.
◆ Clean the water supply valve filter.
◆ Check the water pressure.
◆ Clean the debris filter.
◆ Check if the drain hose is properly installed.
◆ Check if the end of the drain hose is too low. (Check if the drain hose
support is damaged)
◆ Check if the end of the drain hose is steeped in the water.
◆ The supply voltage is unstable.
◆ The program will start automatically when the voltage is stable.
◆ Recover the button.
◆ Power off the machine to check if the wire connecting the motor and
the electric reactor falls off.
◆ Check if the patch cord of the motor and cables fall off.
◆ Check if the computer board wirings fall off.
◆ Restart the machine
◆ Check if the plug wire of the water level sensor is in poor contact.
Solution
Page 34
Service Instructions
Troubleshooting and information codes
Error code
rF
tF
ˉF
Code explanation
Motor abnormity alarm
Temperature sensor
abnormity
Extreme high water level
◆ Check if the plug wires of motor and induction are properly plugged and if the terminal
falls off.
◆ Check if there is voltage of 220-240V at the power input end of the computer board.
◆ Check if the NTC plug wire is in poor contact.
◆Test the resistance of temperature sensor in cold state with the multimeter and
check if it is above 1.5MΩ.
◆ Check if the wire and plug-in between the temperature sensor and the computer
board are in poor contact.
◆ Disentangle flexible pipes of the pressure switch, then test-run the machine.
◆ Check if there is something wrong with the drainage pump.
Solution
Problems and Solutions
Your washing machine is installed with the fuzzy logic control system which can
automatically detect the balance of laundry during spinning. When the laundry is
detected unbalanced or with strong eccentricity by the washing machine, the machine
will properly extend the spin time to adjust the balance of the laundry or run at a lower
speed when spinning in order to avoid damage to the machine.
When there are excessive foams, the time on the display will cease for a spell, meanwhile
the machine is eliminating the foams rather than fault, and the machine will
automatically return to normal program if finished.
Before contacting After-sales Service Department:
1. Try to solve the problem (see “Troubleshooting”).
2. Restart the program to see if the fault still exists.
3. If the fault persists, call after-sales service and describe the problem.
Page 35
Program Control Board
Service Instructions
Loading...