J85ss
Safty warning
Intended use
The citrus juicer is suitable for extracting juice from citrus fruit(lemons,oranges
etc).It is designed for juicing domestic portions and is unsuitable for
commercial purposes.
Hazards to children
• Children often underestimate the risks involved handling electronic
appliances. Therefore, never allow children to use this appliance
unsupervised.
• Keep the packaging material away from children. They could suffocate!
Electrical hazards
• The motor base must not be immersed in water or other liquids or held
under running water as this could give you an electric shock.
• Connect the citrus juicer to a properly installed earthed socket outlet with
the same voltage as the one specified on the rating plate .
• Do not use the appliance outdoors.
• Do not use the appliance if the appliance, connection cord or plug are
damaged or if the appliance has been dropped.
• Do not make any modifications to the appliance or its connection cord.
Repairs must only be carried out by a specialist workshop or other similarly
qualified person. Improper repair may result in a considerable risk of injury
to the user.
• If the connection cord is damaged, it must be replaced by the
manufacturer’s customer service or a similarly qualified person to avoid
hazards.
ENG
1
J85ss
• Remove the mains plug from the wall socket outlet,…
Caution-material damage
• If you apply too much pressure to the cone while juicing, the motor may
• Keep the connection cord away from sources of heat.
…if a disturbance occurs
…after use
…if the citrus juicer is out of use for a prolonged period of time
…before cleaning the citrus juicer
…before removing and inserting the pressing cones.
Always pull the plug, not the cord.
seize.
Important information for placing the juicer
• Place the juicer on a level surface that will not be harmed by splashes of
juice as splashing cannot always be avoided. The surface should be easy
to clean.
• Do not stand the juicer on hot surfaces, such as hotplates or near naked
flames.
• Your citrus juicer is equipped with suction feel. The suction feel will adhere
to any smooth surface. For them to adhere well, the surface must be flat
and also free of dust or grease. The suction feet cannot adhere to a
textured surface. Slightly moisten the suction feel before you press them
onto the surface.
• Do not fix the suction feel to sensitive surfaces. Some paints or synthetic
coatings may react adversely with the material of the suction feel and
soften them .This could cause them to leave marks.
• Never use abrasive or caustic cleaning products, as these might damage
the surfaces.
ENG
2
At a glance (package contents)
J85ss
ENG
3