
BF1200
READ AND SAVE THESES INSTRUCTIONS.
3
PARTS INDENTIFICATION:
1. LOUVER
2. FRONT CASIN
3. LOUVER SWITCH
4. SPEED STAGE SWITCH
5. LOUVER CAP
6. TIME SWITCH
Only applicable to model with timer.
CAUTION:
1. Do not plug line cord into outlet until fan has been
completely assembled.
2. Use only with rated voltage.
1
4
6
5
2
3. Do not attempt to force the louver to turn.
4. Never insert fingers, pencils or any other object
through the grille when the fan is running.
5. To prevent risk of fire and electric shoc
use the unit near windows.
6. Power plug must be removed from power socket
before cleaning. Servicing, maintenance and
move from one location to another.
7. The fan should be placed on a flat and stable
surface when operating to avoid overturning.
8. The fan should not be placed in a damp place or
where humidity is high (such as in a bathroom).
9. No responsibility will be accepted for any damage
which may occur during transport or by improper
installation or voltage fluc
of the product has been altered or modified.
10. This appliance is not intended for use by persons(including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible
tuation or if any portion
k, do not
for their safety.
ENG
1

bf1200
11. Children should be supervised to ensure that they do not play with the
appliance.
12. If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
SPEED CONTROL
To turn on the fan, simply turn any on the SPEED STAGE SWITCH
(1-2-3) To turn it off, turn to the “O”
LOUVER CONTROL
Press the LOUVER SWITCH for stop or move.
120 MINUTES TIMER
The fan stops automatically at the preset timer,
“OFF” position the fan
So, keep the indicator at “ON” position.
CLEANING
To clean the louver, first turn the louver cap to the left and remove it. Then
remove the louver.
MAINTAINANCE
1. Keep this unit in cool dry place.
2. Keep the fan clean. Use a piece of soft cloth soaked with soap water t o
clean off the dust and stains, wipe dry to keep in a fresh appearance. Must
not attempt to use solvents. Like thinner gasoline,etc.
3. After the fan is cleaned then pack it into a
place.
will not operate even if you switch it on.
vinyl bag and store it in a dry
ENG
2

ﺓﺪﻋﺎﻘﺑ ﺔﺣﻭﺮﻣ
Campomac S.R.L. Via Configliachi 5/B . 35031, Abano Terme (Padova), ITALIA
WWW.CAMPOMATIC.COM