Campbell Scientific PS100 User Manual

PS100 and CH100 Power Supply

and Charging Regulators,

A100 Null Modem Adapter,

and A105 Additional

12 V Terminals Adapter

Revision: 4/09

Copyright © 2000-2009

Campbell Scientific, Inc.

Warranty and Assistance

The PS100 AND CH100 POWER SUPPLY AND CHARGING
REGULATORS, A100 NULL MODEM ADAPTER, AND A105
ADDITIONAL 12 V TERMINALS ADAPTER are warranted by

CAMPBELL SCIENTIFIC, INC. to be free from defects in materials and
workmanship under normal use and service for twelve (12) months from date
of shipment unless specified otherwise. Batteries have no warranty.
CAMPBELL SCIENTIFIC, INC.'s obligation under this warranty is limited to
repairing or replacing (at CAMPBELL SCIENTIFIC, INC.'s option) defective
products. The customer shall assume all costs of removing, reinstalling, and
shipping defective products to CAMPBELL SCIENTIFIC, INC. CAMPBELL
SCIENTIFIC, INC. will return such products by surface carrier prepaid. This
warranty shall not apply to any CAMPBELL SCIENTIFIC, INC. products
which have been subjected to modification, misuse, neglect, accidents of
nature, or shipping damage. This warranty is in lieu of all other warranties,
expressed or implied, including warranties of merchantability or fitness for a
particular purpose. CAMPBELL SCIENTIFIC, INC. is not liable for special,
indirect, incidental, or consequential damages.

Products may not be returned without prior authorization. The following
contact information is for US and International customers residing in countries
served by Campbell Scientific, Inc. directly. Affiliate companies handle
repairs for customers within their territories. Please visit
www.campbellsci.com to determine which Campbell Scientific company
serves your country.

To obtain a Returned Materials Authorization (RMA), contact CAMPBELL
SCIENTIFIC, INC., phone [phone]. After an applications engineer
determines the nature of the problem, an RMA number will be issued. Please
write this number clearly on the outside of the shipping container.
CAMPBELL SCIENTIFIC's shipping address is:

CAMPBELL SCIENTIFIC, INC.

RMA#_____
815 West 1800 North
Logan, Utah 84321-1784

For all returns, the customer must fill out a “Declaration of Hazardous Material
and Decontamination” form and comply with the requirements specified in it.
The form is available from our website at
completed form must be either emailed to [e-mail]
to 435-750-9579. Campbell Scientific will not process any returns until we
receive this form. If the form is not received within three days of product
receipt or is incomplete, the product will be returned to the customer at the
customer’s expense. Campbell Scientific reserves the right to refuse service on
products that were exposed to contaminants that may cause health or safety
concerns for our employees.

CAMPBELL SCIENTIFIC, INC. does not accept collect calls.

www.campbellsci.com/repair

. A

or faxed

PS100 Table of Contents

PDF viewers note: These page numbers refer to the printed version of this document. Use
the Adobe Acrobat® bookmarks tab for links to specific sections.

1. General Description.....................................................1

2. Specifications ..............................................................1

3. Wiring............................................................................2

4. A100 Null Modem Adapter ..........................................4

5. A105 12V Terminal Expansion Adapter.....................5

Figures

1. Wiring to Charger.......................................................................................3

2. Simplified Charging Circuit Schematic......................................................4

3. Null Modem Connections...........................................................................5

4. A105 Adapter .............................................................................................5

i