Campbell Scientific CC5MPX, CC5MPXWD User Manual

CC5MPX and CC5MPXWD

Digital Network Cameras

Revision: 3/12

Copyright © 2011-2012

Campbell Scientific, Inc.

Warranty

“PRODUCTS MANUFACTURED BY CAMPBELL SCIENTIFIC, INC. are
warranted by Campbell Scientific, Inc. (“Campbell”) to be free from defects in
materials and workmanship under normal use and service for twelve (12)
months from date of shipment unless otherwise specified in the corresponding
Campbell pricelist or product manual. Products not manufactured, but that are
re-sold by Campbell, are warranted only to the limits extended by the original
manufacturer. Batteries, fine-wire thermocouples, desiccant, and other
consumables have no warranty. Campbell's obligation under this warranty is
limited to repairing or replacing (at Campbell's option) defective products,
which shall be the sole and exclusive remedy under this warranty. The
customer shall assume all costs of removing, reinstalling, and shipping
defective products to Campbell. Campbell will return such products by surface
carrier prepaid within the continental United States of America. To all other
locations, Campbell will return such products best way CIP (Port of Entry)
INCOTERM® 2010, prepaid. This warranty shall not apply to any products
which have been subjected to modification, misuse, neglect, improper service,
accidents of nature, or shipping damage. This warranty is in lieu of all other
warranties, expressed or implied. The warranty for installation services
performed by Campbell such as programming to customer specifications,
electrical connections to products manufactured by Campbell, and product
specific training, is part of Campbell’s product warranty. CAMPBELL
EXPRESSLY DISCLAIMS AND EXCLUDES ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. Campbell is not liable for any special, indirect,
incidental, and/or consequential damages.”

Assistance

Products may not be returned without prior authorization. The following
contact information is for US and international customers residing in countries
served by Campbell Scientific, Inc. directly. Affiliate companies handle
repairs for customers within their territories. Please visit

www.campbellsci.com to determine which Campbell Scientific company serves

your country.

To obtain a Returned Materials Authorization (RMA), contact CAMPBELL
SCIENTIFIC, INC., phone [phone]. After an applications engineer
determines the nature of the problem, an RMA number will be issued. Please
write this number clearly on the outside of the shipping container. Campbell
Scientific's shipping address is:

CAMPBELL SCIENTIFIC, INC.
RMA#_____
815 West 1800 North
Logan, Utah 84321-1784

For all returns, the customer must fill out a "Statement of Product Cleanliness
and Decontamination" form and comply with the requirements specified in it.
The form is available from our web site at www.campbellsci.com/repair. A
completed form must be either emailed to [e-mail] or faxed to
[phone]. Campbell Scientific is unable to process any returns until we
receive this form. If the form is not received within three days of product
receipt or is incomplete, the product will be returned to the customer at the
customer's expense. Campbell Scientific reserves the right to refuse service on
products that were exposed to contaminants that may cause health or safety
concerns for our employees.

CC5MPX Table of Contents

PDF viewers: These page numbers refer to the printed version of this document. Use the
PDF reader bookmarks tab for links to specific sections.

1. Introduction...............................................................1-1

2. Specifications............................................................2-1

3. Getting Started ..........................................................3-1

3.1 Factory Setup ..................................................................................... 3-1

3.2 Installing Multimedia Player.............................................................. 3-1

3.3 ActiveX Controls in Internet Explorer............................................... 3-2

3.4 Setup Using Ethernet ......................................................................... 3-2

3.5 Setup Using Device Configuration Utility......................................... 3-6

4. Cables/Wiring ............................................................4-1

4.1 Power and I/O Cable Connections ..................................................... 4-1

4.2 CC5MPXCBL1-L Power and I/O Cable Details ............................... 4-5

4.3 Ethernet Cables .................................................................................. 4-5

5. Camera Hardware Description.................................5-1

5.1 Ethernet RJ-45 Connection ................................................................ 5-1

5.2 Power I/O Connection........................................................................ 5-2

5.3 Setup Button/Status LED ................................................................... 5-2

5.3.1 Status LED ............................................................................... 5-2

5.3.2 Setup Button............................................................................. 5-3

5.4 SD Memory Card............................................................................... 5-4

5.4.1 Accessing SD Memory Card.................................................... 5-4

5.4.2 FTP Image Collection from the Memory Card......................... 5-5

5.5 Switched Power Output ..................................................................... 5-6

6. Camera Configuration ..............................................6-1

7. Camera Operation Using Web Browser Interface....7-1

7.1 Live Video Homepage ....................................................................... 7-2

7.2 Network Configuration ...................................................................... 7-3

7.2.1 Network Settings...................................................................... 7-5

7.2.2 Ethernet Power Mode Settings ................................................. 7-5

7.2.3 FTP Server Setting ................................................................... 7-7

7.2.4 SMTP (Email) Server Settings................................................. 7-8

7.2.5 SNTP (TIME) Server Setting................................................... 7-9

7.3 System Configuration ...................................................................... 7-10

7.3.1 System Date and Time ........................................................... 7-11

7.3.2 Automatic Date and Time Update.......................................... 7-12

7.3.3 Site Name ............................................................................... 7-12

7.3.4 Users and Security.................................................................. 7-13

7.3.5 Digital I/O Settings................................................................. 7-15

i