INSTRUCTION MANUAL
CM10 and CM6 Tripod
Revision: 11/90
Copyright (c) 1989-1990
Campbell Scientific, Inc.
Warranty and Assistance
The CM10 AND CM6 TRIPODS are warranted by CAMPBELL
SCIENTIFIC, INC. to be free from defects in materials and workmanship under
normal use and ser vice for twelve (1 2) months from date of shipment unless
specified otherwise. Batteries have no warranty. CAMPBELL SCIENTIFIC,
INC.'s obligation under this warranty is limited to repairing or replacing (at
CAMPBELL SCIENTIFIC, INC.'s option) defective products. The customer
shall assume all costs of removing, reinstalling, and shipping defective products
to CAMPBELL SCIENTIFIC, INC. CAMPBELL SCIENTIFIC, INC. will
return such products by surface carrier prepaid. This warranty shall not apply
to any CAMPBELL SCIENTIFIC, INC. products which have been subjected to
modification, misuse, neglect, accidents of nature, or shipping damage. This
warranty is in lieu of all other warranties, expressed or implied, including
warranties of merchantability or fitness for a particular purpose. CAMPBELL
SCIENTIFIC, INC. is not liable for special, indirect, incidental, or
consequential damages.
Products may not be returned without prior authorization. The following
contact information is for US and International customers residing in countries
served by Campbell Scientific, Inc. directly. Affiliate companies handle repairs
for customers within their territories. Please visit www.ca mpbellsci.co m to
determine which Campbell Scientific company serves your country. To obtain
a Returned Materials Authorization (RMA), contact CAMPBELL
SCIENTIFIC, INC., phone (435) 753-2342. After an applications engineer
determines the nature of the problem, an RMA number will be issued. Please
write this number clearly on the outside of the shipping container.
CAMPBELL SCIENTIFIC's shipping address is:
CAMPBELL SCIENTIFIC, INC.
RMA#_____
815 West 1800 North
Logan, Utah 84321-1784
CAMPBELL SCIENTIFIC, INC. does not accept collect calls.
CM10 AND CM6 TRIPOD
1. GENERAL
The CM10 and CM6 Tripods are general
purpose instrument mounts. They are designed
to provide sturdy support for common sensors,
enclosures, and antennas.
The CM10 is a 10 ft. adjustable tripod, and the
CM6 is a 6 ft. adjustable tripod.
3. CM6 SPECIFICATIONS
Height
6 ft. (variable)
Weight
45 lbs.
Vertical Load Limit
100 lbs.
Mast
1 1/4 in. I.D. pipe
Tripod Base Diameter
Up to 6' (Adjustable)
Leveling Adjustment
Individual leg slide collars
Leg Base
2" x 4" with 1/2" ground stake hole
Portability
Collapsible to 4' length x 9" dia.
4. ASSEMBLY
The CM10/CM6 is assembled as shown in
Figure 1. The bolts on the leg's slide collars
must be loosened before the tripod will unfold.
Accessories for the tripods are shown in
Figure 2. Following are the accessories for the
tripods which may be purchased separately:
FIGURE 1. CM10/CM6 Tripod Assembly
Drawing
2. CM10 SPECIFICATIONS
Height
10 ft. (variable)
Weight
70 lbs.
Vertical Load Limit
100 lbs.
Mast
1 1/4 in. I.D. pipe
Tripod Base Diameter
Up to 10' (Adjustable)
Leveling Adjustment
Individual leg slide collars
Leg Base
2" x 5" with 1/2" ground stake hole
Portability
Collapsible to 6' length x 9" dia.
019ALU Sensor Crossarm Mount
015 Pyranometer Mounting Arm
025 Pyranometer Crossarm Stand
41004-5 12 Plate Gill Radiation Shield for 207
Probe
41002-2 12 Plate Gill Radiation Shield for
HMP35C
41301-5 6 Plate Gill Radiation Shield
The 019ALU Crossarm connects to the tripod
top post for mounting sensors such as
pyranometers and wind sensors. The 015
Pyranometer Mounting Arm is used for
mounting a pyranometer when both ends of the
019ALU Crossarm are used for other sensors.
The 025 Pyranometer Crossarm Stand is the
alternative pyranometer mount when only one
end of the 019ALU Crossarm is being used for
other sensors.
The 12 Plate 41004-5 and 41002-2 and the 6
Plate 41301-5 Gill Radiation Shields are
housings for temperature and relative humidity
sensors. The naturally ventilated shields
eliminate radiation loading of the sensors. The
1
CM10 AND CM6 TRIPOD
size of the sensor determines whether a 12 plate
or 6 plate shield is required.
The rain gauge is usually placed away from the
tripod on a separate post or pipe, which is not
provided.
FIGURE 2. CM10/CM6 Tripod with Additional Accessories
2
This is a bla nk page.
Campbell Scientific Companies
Campbell Scientific, Inc. (CSI)
815 West 1800 North
Logan, Utah 84321
UNITED STATES
www.campbellsci.com
info@campbellsci.com
Campbell Scientific Africa Pty. Ltd. (CSAf)
PO Box 2450
Somerset West 7129
SOUTH AFRICA
www.csafrica.co.za
sales@csafrica.co.za
Campbell Scientific Australia Pty. Ltd. (CSA)
PO Box 444
Thuringo wa Cent ra l
QLD 4812 AUSTRALIA
www.campbellsci.com.au
info@campbellsci.com.au
Campbell Scientific do Brazil Ltda . (CSB)
Rua Luisa Crapsi Orsi, 15 Butantã
CEP: 005543-000 São Paulo SP BRAZIL
www.campbellsci.com.br
suporte@campbellsci.com.br
Campbell Scientific Canada Corp. (CSC)
11564 - 149th Street NW
Edmonton, Alberta T5M 1W7
CANADA
www.campbellsci.ca
dataloggers@campbellsci.ca
Campbell Scientific Ltd. (CSL)
Campbell Park
80 Hathern Road
Shepshed, Loughborough LE12 9GX
UNITED KINGDOM
www.campbellsci.co.uk
sales@campbellsci.co.uk
Campbell Scientific Ltd. (France)
Miniparc du Verger - Bat. H
1, rue de Terre Neuve - Les Ulis
91967 COURTABOEUF CEDEX
FRANCE
www.campbellsci.fr
campbell.scientific@wanadoo.fr
Campbell Scientific Spain, S. L.
Psg. Font 14, local 8
08013 Barcelona
SPAIN
www.campbellsci.es
info@campbellsci.es
Please visit www.campbellsci.com to obtain contact information for your local US or International representative.
Loading...