CamOne Infinity, Infinity SER1516Q User Manual
Manual
(Download – CamOneTec.com)
Version: 1.05
turn on video & images
DiveBox Battery Manual Pouch
Ten-2-Ten Adaptor USB-Cable USB-AV-Cable
M-Mount Handlebar Mount Extension long Extension short
Helmet Mount with belt Flat Mount Curved Mount Adhesive pad big & small
Content of the Box
Please check the completeness before using the product.
CamOne infinity
turn on video & images
Index
Content of the Box 2
Preparation 4
Insert/replace Battery 4
Charging the Battery 4
Functional Diagram 5
Main Functions 6
Compatible Memory Cards 7
Inserting/Removing the micro SD Card 7
Switching on the Camera 7
Icons (Camera Status) 8
Setup Menu 8
Using the DiveBox and different Mounts 10
Photo / Video Recording 11
Underwater Recordings 11
Video Timelapse 11
Photo Interval 12
Photo Serial Recording 12
Zoom 12
Playback of Videos and Photos 12
Copy/Transfer Video Files (MS Windows) 13
Firmware Update 13
Using external Modules 14
Exchanging the Lens (optional) 15
Liability 15
Maintenance 15
Technical Data 16
FAQ 17
Accessories 18
Safety Advice 19
Service & Support 19
turn on video & images
4
Preparation
Compensation for recorded content
CamOne Tec will not be responsible in any case for any consequential or direct problems that
will lead to a loss of recorded or edited data. Furthermore, CamOne Tec will not guarantee the
content in case the recording or saving is not working properly. The above limitations are also
valid in case the unit has been repaired. Do not remove the micro SD Card while recording
or saving. Do not switch off or take out the battery before the recording has been nished or
as long as there is access to the memory, indicated by a rotating circle. Protect the unit from
extreme temperatures. Do not record at temperatures lower than minus 10°C or higher than
50°C. Remove the camera from the windshield/sucking pad in case extreme temperatures
can be expected!
It is known that forged accumulators which remarkably look like the original product are
offered for sale repeatedly. Some of these accumulators are not equipped with a proper
protection circuit which would satisfy the regulations of the prevailing safety regulations.
These accumulators might lead to res or explosions. We take no liability for accidents,
damages or failures which result from the use of a forged accumulator.
Insert/replace Battery
1. Push the locker to the front (lens direction)
2. Pull out the battery cover.
3. Remove the cover, below you will nd the battery case.
4. Align the battery’s contacts with the golden contacts inside the
cam and insert battery.
! Only use the original battery (Art-No.: COIN08). Batteries
of other suppliers may have different polarities and cause
damages!
Charging the Battery
The enclosed battery is not fully charged when being purchased. Please charge the battery
before using the CamOne innity for the rst time!
Connect the camera with your computer using the included USB-cable. The charging process
is indicated by the red LED light which switches to green as soon as charging is nished.
Charging takes about 3 hours. You can alternatively use the 5V USB-Power adaptor (Art.
No.: FCHD43).
1
2
turn on video & images
5
Functional Diagram
The USB comport has the following setup:
» AV-Out
» 5V IN
» Data input
» Signal IN
Due to limitations in the technology of the display production, single or few dark
or light dots might appear. This is not a defect and will not have any impact on the
recorded video or photo!
Key Panel
Port Cover
Microphone
Status LEDs
Front LED
OCB-Contacts
Wi/2,4 GHz Module
Battery cover
Screen
Tripod thread
Lens
turn on video & images
6
Main Functions
! The buttons of the CamOne innity are multifunctional
Play button Photo button Video button
Replay
Switching through submenus
Conrming chosen options
Photo function
Switching through submenus
Zoom In
Video function
Switching through submenus
Zoom Out
On/Off
Light button
Menu button
Switching through
3 submenus
Micro SD Card slot 2
Micro SD Card slot 1
HDMI Port
10-Pin Port Mini USB 2.0
Loading...