Camera2000 Pz0513 User Manual

DESCRIPTION

PRECAUTIONS

FEATURES

PARTS INSTRUCTION

Pz0513

Ultra Wide Dynamic Mini Camera

User's Manual

Average camera with BLC off Average camera with BLC on Ultra Wide Dynamic Range camera

Ultra Wide Dynamic Range

The captured wide dynamic range is 102dB typical and can reach
120dB maximum.

High Effective Resolution

Image resolution as high as 690TVL-E, offering enhanced horizontal
and vertical resolution useable in existing as well as new CCTV
systems.

Lower Illumination Working Capability

0.1Lux low illumination (IR OFF)

3D Noise Eliminating Technology

Adopts Pixim fully digitalized 3D noise reduction technology to
minimize noise, extending DVR storage by 30%+.

This camera adopts innovative DPS(Digital Pixel System) image
sensor and image processing technology. The sensor picks up details
from each pixel based on hundreds of samples per video frame. vs
CCD's limited exposures, to ensure wider dynamic range than isposs

-ible with analog CCD. The image quality is even brilliant under
extreme lighting conditions.changeable lighting condition.

“SEAWOLF Image Sensor

1. Use the Appropriate Power Supply

2. Do not attempt to disassemble the camera.

3. Handle the camera with care.

The input power will be DC12V . Be sure to connect it to the

appropriate power. Wrong connection may cause malfunction and
damage to the video camera.

To prevent electric shock, do not remove screws or covers. There

are no user serviceable parts inside. Ask a qualified service person
for servicing.

Do not abuse the camera. Avoid striking, shaking, etc. The camera

could be damaged by improper handling or storage.

4. Do note use strong or abrasive detergents when cleaning the
camera body

5. Do not putthe cam era in a place w ith interference.

Use a dry cloth to clean the camera when dirty. In case the dirt is

hard to remove Use a mild detergent and wipe gently.

When this camera is installed near the equipment like wireless
communication device which emits strong electromagnetic field,
some irregularity such as noise on monitor screen may happen.

Enter

Right

Left

Up

Down

OSD Menu Operation

ENTER: Enter Menu or Select Menu
UP/DOWN: This button is used to move the cursor upward or

downward.

LEFT/RIGHT: This left or right button is used to move the cursor

horizontally or change parameter.

OSD Menu Setup

SW series Ultra WDR cameras are new CCTV cameras which adopt
Pixim'sinnovative SEAWOLF image sensor chip based on Digital
Pixel System technology. The resolution is up to 690TVL-E and
the industry-leading wide dynamic range is up to 120dB. This WDR
ensures brilliant image quality under any lighting environment. The
image and color quality is also excellent in low illumination environ

-ments. This camera series is a ultra wide dynamicrange camera in
the real sense using digital sampling which can't be paralleledby
average wide dynamic range cameras using older generation CCD
imagers. The application of 3D digital noise reduction technology
ensures higher S/N, which efficiently reduces the digital storage and
transmission data saving system cost. Fashionable and professional
exterior design and special all-in-one all directional bracket, makes
round-the-clock surveillance easy and convenient.

“”

®

AGC:

:

Move cursor to AGC by Up and Down button, set AGC by Left and

Right Button as NORMAL, LOW and HIGH. Setting AGC is better
for cameras to work in wider lighting range, if the illumination is low,
can set AGC high to rise the sensitivity of cameras.

LENS SELECT:

Move cursor to LENS SELECT, set LENS SELECT by Right and Left
button as :MANUAL,DC:DC Automatically. MANUAL FOR
MANUAL IRIS LENS, DC for AUTO IRIS LENS.

FLUORESCENT:

Move cursor to FLUORESCENT by Up and Down button, set by Left

and Right buttonas: OFF, CRR2: Color Rolling Restrain. Cameras
output color rolling image under fluorescent lamp, CRR can restrain
color rolling, keep the image stable.

D/N Control:

Move cursor to D/N Control by Up and Down button, set D/N by Left
andRight button as: OFF; Auto;GPIO: External Control; On. The
illumination is very low at night, so we need to rise the sensitivity and
improve imaging quality, then we can get better image quality. Set
D/N in accordance with different actual need.

SAVE&EXIT:

:

Move cursor to SAVE&EXIT by Up and Down button, set by Left

and Right button as SAVE&EXIT;DEFAULT,CANCEL.

LANGAGE SELECT:

:

Move cursor to LANGAGE SELECT by Up and Down button, set by
Left and Right button as ENGLISH;CHINESE.

ATW

MEDIUM

OFF

NORMAL

OFF

DC

AUTO
ENGLISH
DEFAULT

WDR CONTROL

BLC
WHITE BALANCE

LENS SELECT

D/N CONTROL

LANGAGE SELECT

AGC

FLUORESCENT

SAVE

()ATW/AWB

()LOW/NORMAL/MEDIUM/HIGH
()OFF/ON

()LOW/NORMAL/HIGH

()OFF/CRR/CRR2

()MANUAL/DC

()OFF/AUTO/GPIO
()ENGLISH/CHINESE
()CANCEL

CAMERA SETUP

WD NROMAL

SAVE

PRESETS

PRE

WDR ZONE SELECT:

NORMAL METER PRESETS

WD NROMAL/SAFE AREA/ATM/LOW1/3

CANCEL

*Specialists press "Left, Right, Left, Right, Down" button enter superior menu.

OSD MENU OPERATION

WDR Control:

Press Enter to show the menu, move the cursor to WDR Control, set
MEDIUM, NORMAL, LOW, HIGHby left and right button; choose

the setting for WDRinaccordance with the lighting condition, set
High in strong lighting contrast to realize higher quality image.
WDR ZONE SELECT:WD NROMAL/SAFE AREA/ATM/LOW 1/3.

BLC:
move to BLC by Up and Down button, set BLC by Left and Right
button: On and Off.

WHITE BALANCE:

Move to White Balance by Up and Down button, set White balance by

Left and Right button: AWB: Auto White Balance; ATW: Auto Track

-ing White Balance. The color's temperature are different in different

lighting condition,The color's temperature changes in different ligh

-ting condition, so the white color in video image changes if the light

-ing condition changes. AWB means cameras can compensate color
temperature automatically. In some special environment, in orderto
keep the same color temperature , ATW setting can keep a fixed color
temperature

*Specification is subject to change without prior notice

Model

Sensor

Video Format

SYNC Mode

Resolution

S/N Ratio

Mini illumination

AGC

White
Balance

BLC

WDR control

Voltage

Current

Lens

Working Temperature

Size

Weight

1/3 DPS Sensor”

PAL/NTSC

INTERNAL

690HTVL-E

normal, low, high

ON,OFF

medium, normal, low, high

DC12V

>50dB（AGC OFF

）

Tracking White Balance, Auto White Balance(ATW)

-10 C ~50 C

D/N

OFF, External Control, Auto; ON

Sensor

Control

Power

0.1Lux

100g

（ ）2200~10000 KAuto White Balance

38X38mm

<150mA

SPECIFICATION

Automatic

Mode

Pz0513

2.8mm or 3.6mm