Camera2000 MNR1218L Operation Instruction Manual

Operation instruction for H. 264 HD 1080P

Remote Control

A: power button/reset button B: function button
C: mode switch button D: indicator
E: Mic hole F: lens
G: key release button H: Mini USB
I: HDMI J: Miscro TF
K: Key ring hole

Thanks for using our company‟s video recording product. Prior to use, please read this

operation instruction carefully. Provided that you begin to use this product, we will
consider that you have already read this instruction carefully.

I Product features

1．Unique appearance design, external TF card slot, strong concealment

2. HD camera with 10 million pixels, clear shooting image with 1080P effect

3. HD MOV format with H.264 coding, recording audio and video simultaneously

4. Video resolution: 320*240 30 frames, 1280*720 30 frames, 1440*1080 15 frames
(optional).
5 Independent camera functions: the pixel of the photo can reach 4032*3024.1200 million

6. Built-in high capacity rechargeable lithium.

7. External rewritable Flash1-64GB (optional)

II Operation instructions

1, Turn on the camera: short press the power button once; the blue light is on after quickly

flashing for 5 times; the machine comes into standby mode.

2. Recording video: in standby mode (the blue light is on), press the function button once,
the blue indicator light goes out after slowly flashing for 5 times and comes into the video
recording status. If you want to stop recording the video, press the function button once
and the machine will stop and save the video file. The video file will be saved
automatically every 10 minutes.

3. Taking photos: in standby mode, short press the mode switch button once, then the
blue light flashes once and enters exposal mode. Every short press done to the function
button will make the blue indicator flash once, and a photo is taken; then short press the
mode switch button again to exit the exposal mode.

4 Separate sound recording: in standby mode, press the mode switch button twice to
recording mode; a short press for the function button will have the blue indicator flash at
constant speed, which means that it enters recording mode; and then press the function
button once to stop separate sound recording for returning to standby mode.

5. Motion detection recording: in standby mode, carry out a short press for the power
button, and therefore the blue indicator goes out after 5 quick flashes; at this time, the
machine goes into the motion detection recording mode. The motion detection recording
generates a file automatically every minute, and continues recording automatically. In
motion detection recording mode, the camera is activated when someone moves in front
of the camera; otherwise, it will enter standby status. In motion detection mode, the
camera is consuming power (even it is not recording). That is merely for saving storage
space but not saving electricity. In state of motion detection recording, stop motion
detection status and return to standby mode by short press for function button.

6. Turn off the camera: in the standby mode (or other power on modes), conduct long
press for power button, and the blue indicator will go out and the machine will shut down.

7. The computer camera: turn on the camera and connect it to the computer; at the same

time, keep pressing the function button until the ding-dong sound is heard; open my
computer, and the web camera can be seen.

8. Connect to the computer: turn on the camera, and connect to the computer with data

line; the computer can identify the removable disk.
Notice: when the camera is in a shutdown state and connects to the computer, it is to
charge the machine, and the green indicator is on until it is full charged.