Cameo Communications WLB2006 Users Manual

Wireless LAN Access Point

User Guide

Regulatory notes and statements

Wireless LAN, Health and Authorization for use

Radio frequency electromagnetic energy is emitted from Wireless LAN
devices. The energy levels of these emis sions however are far much less t han
the electromagnetic energy emi ssions from wireless devices like for example
mobile phones. Wireless LAN devices are safe for use frequency safety
standards and recommendations. The use of Wireless LAN devices may be
restricted in so me situations or environments for example:

·On board of airplanes, or

·In an explosive environment, or

·In case the interference risk to other devices or services is perceived or
identified as harmful

In case the policy regarding the use of Wireless LAN devices in specific
organizations or environments (e.g. airports, hospitals, chemical/oil/gas
industrial plants, private buildings etc.) is not clear, please ask for
authorization to use these devices prior to operating the equipment.

Regulatory Information/disclaimers

Installation and use of this Wireless LAN device must be in strict accordance
with the instructions included in the user documentation provided with the
product. Any changes or modifications made to this device that are not
expressly approved by the manufacturer may void the user’s authority to
operate the equipment. The Manufacturer is not responsible for any radio or
television interference caused by unauthorized modification of this device, of
the substitution or attachment. Manufacturer and its authorized resellers or
distributors will assume no liability for any damage or violation of
government regulations arising from failing to comply with these guidelines.

USA-FCC (Federal Communications Commission) statement

This device compli es with Part 15 of FCC Rules.
Operation is subject to the following two conditions:

1. This device may not cause interference, and

2. This device must accept any interference, including interference that may
cause undesired operation of this device.

FCC Radio Frequency Exposure statement

This Wireless LAN radio device has been evaluated under FCC Bulletin OET
65 and found compliant to the requirements as set forth in CFR 47 Sections

2.1091, 2.1093, and 15.247 (b) (4) addressing RF Exposure from radio
frequency devices. The radiated output power of this Wireless LAN device is
far below the FCC radio frequency exposure limits. Nevertheless, this device
shall be used in such a manner that the potential for human contact during
normal operation is minimized.

When nearby persons has to be kept to ensure RF exposure compliance, in
order to comply with RF exposure limits established in the ANSI C95.1
standards, the distance between the antennas and the user should not be less
than 20 cm.

FCC Interference Statement

This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.

This equipment generates, uses, and can radiate radio frequency energy. If not
installed and used in accordance with the instructions, it may cause harmful
interference to radio communications.

However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try and correct the interference by one or
more of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the distance between the equipment and the receiver.

3. Connect the equipment to an outlet on a circuit different from that to which
the receiver is connected.

4. Consult the dealer or an experienced radio/TV technician for help.

Export restrictions

This product or software contains encryption code that may not be exported or
transferred from the US of Canada without an approved US Department of
Commerce export license.

Safety Information

Your device contains a low power transmitter. When device is transmitted it
sends out radio frequency (RF) signal.

CAUTION: To maintain compliance with FCC’s RF exposure guidelines, this
equipment should be installed and operated with minimum distance 20cm
between the radiator and your body. Use on the supplied antenna.
Unauthorized antenna, modification, or attachments could damage the
transmitter and may violate FCC regulations.

CE Mark Warning

This is a Class B product. In a domestic environment, this product
may cause radio interference, in which cas e the user may be required
to take adequate measures.

Testing for electric safety according to EN 60950 has been conducted. These are

EN 301

2 has been conducted. These

IEEE 802.11b

in compliance with the essential requirements and other

Declaration of Conformity for R&TTE directive 1999/5/EC

Essential requirements – Article 3
Protection requirements for health and safety – Article 3.1a

considered relevant and sufficient.

Protection requirements for electromagnetic compatibility – Article 3.1b
Testing for electromagnetic compatibility according to EN 301 489-1 and
489-17 has been conducted. These are considered relevant and sufficient.

Effective use of the radio spectrum – Article 3.2
Testing for radio test suites according to EN 300 328­are considered relevant and sufficient.

Hereby, [CAMEO COMMUNICATIONS, INC.], declares that this [
Wireless Access Point] is
relevant provisions of Directive 1999/5/EC.”

TABLE OF CONTENT

About This Guide.................................................................................1

Purpose ............................................................................................1

Overview of this User’s Guide.........................................................1

Unpacking and Setup...........................................................................3

Unpacking...................... ..................................................................3

Setup................................................................................................3

Hardware Instalation............................................................................5

LED Indicator..................................................................................5

Rear Panel........................................................................................6

Hardware connections......................................................................7

Connect to the Switch/Hub ..........................................................7

Check the installation...................................................................7

Configuring the Wireless LAN Access Point ......................................9

Login................................................................................................ 9

Site Contents of the Access Po int ..................................................10

Status..............................................................................................11

Wireless .........................................................................................12

TCP/IP Setting...............................................................................16

Statistics.........................................................................................17

Upgrade Firmware.........................................................................17

Save/Reload Settings .....................................................................18

Password Settings..........................................................................19

Technical Specifications....................................................................21

ABOUT THIS GUIDE

Congratulations on your purchase of this IEE E 80 2.11b Wire less LAN
Access Point. This manual helps to features the innovating wireless
technology that can help you build a wireless network easily! This
manual contains detailed instructions in operation of this product.
Please keep this manual for future reference.

With a WLAN (IEEE 802.11b) Access Point, a mobile computer can share
data with another mobile computer in a wireless way. Easy-to-use utilities are
bundled with WLAN Access Point for configuration and monitoring purposes.

WLAN networking can wirelessly transmit and receive data, minimizing the
need for wired connections, at a speed of up to eleven megabit per second.
With WLAN networking, you can locate your PC wherever you want without
wires and cables.

WLAN networking provides users with an access to real-time information
anywhere in their organization. The mobility provides productivity and
service, which are not available under wired networks.

Purpose

This manual discusses how to install the WLAN Access Point.

Overview of this User’s Guide

Introduction. Describes the WLAN Access Point and i ts features.
Unpacking and Setup. Helps you get started with the basic installation of the

WLAN Access Point.

Hardware Installation. Describes the LED indicators of the AP.
Software Installation. Tells how to setup the driver and the utility setting.
Technical Specifications. Lists the technical (general, physical and

environmental) specifications of the WLAN Access Point.

1