Cameo Communications WLB1403 User Manual
IEEE 802.11b
Pen Size Wireless
USB Adapter
User’s Guide
Regulatory notes and statements
Wireless LAN, Health and Authorization for use
Radio frequency electromagnetic energy is emitted from Wireless LAN
devices. The energy levels of these emis sions however are far much less t han
the electromagnetic energy emi ssions from wireless devices like for example
mobile phones. Wireless LAN devices are safe for use frequency safety
standards and recommendations. The use of Wireless LAN devices may be
restricted in some situations or environments for example:
·On board of airplanes, or
·In an explosive environment, or
·In case the interference risk to other devices or services is perceived or
identified as harmful
In case the policy regarding the use of Wireless LAN devices in specific
organizations or environments (e.g. airports, hospitals, chemical/oil/gas
industrial plants, private buildings etc.) is not clear, please ask for
authorization to use these devices prior to operating the equipment.
Regulatory Information/disclaimers
Installation and use of this Wireless LAN device must be in strict accordance
with the instructions included in the user documentation provided with the
product. Any changes or modifications made to this device that are not
expressly approved by the manufacturer may void the user’s authority to
operate the equipment. The Manufacturer is not responsible for any radio or
television interference caused by unauthorized modification of this device, of
the substitution or attachment. Manufacturer and its authorized resellers or
distributors will assume no liability for any damage or violation of
government regulations arising from failing to comply with these guidelines.
ii
USA-FCC (Federal Communications Commission) statement
This device compli es with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may
cause undesired operation of this device.
FCC Radio Frequency Exposure statement
This Wireless LAN radio device has been evaluated under FCC Bulletin OET
65 and found compliant to the requirements as set forth in CFR 47 Sections
2.1091, 2.1093, and 15.247 (b) (4) addressing RF Exposure from radio
frequency devices. The radiated output power of this Wireless LAN device is
far below the FCC radio frequency exposure limits. Nevertheless, this device
shall be used in such a manner that the potential for human contact during
normal operation is minimized.
FCC Interference Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy. If not
installed and used in accordance with the instructions, it may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try and correct the interference by one or
more of the following measures:
iii
1. Reorient or relocate the receiving antenna.
2. Increase the distance between the equipment and the receiver.
3. Connect the equipment to an outlet on a circuit different from that to which
the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
Export restrictions
This product or software contains encryption code that may not be exported or
transferred from the US of Canada without an approved US Department of
Commerce export license.
Safety Information
Your device contains a low power transmitter. When device is transmitted it
sends out radio frequency (RF) signal.
CAUTION: This device and its antenna must not be co-located oroperating in
conjunction with any other antenna or transmitter.Use on the supplied
antenna.
Unauthorized antenna, modification, or attachments could damage the
transmitter and may violate FCC regulations.
CE Mark Warning
This is a Class B product. In a domestic environment, this product
may cause radio interference, in which cas e the user may be required
to take adequate measures.
iv
TABLE OF CONTENT
Introduction..........................................................................................1
Overview of this User’s Guide.........................................................1
Unpacking and Setup...........................................................................3
Unpacking...................... ..................................................................3
Setup................................................................................................3
Connecting the USB Extension Cable.............................................4
Hardware Installation...........................................................................5
LED Indicator..................................................................................5
Check the installation....................................................................... 5
Software Installation............................................................................7
Windows 98/ME/2000/XP Utility and Driver Installation...............7
Wireless Configuration Utility Setting............................................. 9
Technical Specifications....................................................................19
v
INTRODUCTION
Congratulations on your purchase of this IEEE 802.11b Pen Size Wireless
USB Adapter.
This manual helps to get familiar with the Pen Size Wireless USB Adapter.
This manual contains detailed instructions in operation of this product. Please
keep this manual for future reference.
The Pen Size Wireless USB Adapter are tremendous advantages for notebook
users. Take the pen-sized Adapter wherever you go. The Adapter draws power
from the PC, so you don’t need an external power supply.
With a Wireless LAN (IEEE 802.11b) USB 1.1 Adapter, a desktop or laptop
computer can communicat e with another computer in a wireless way. Easy-touse utilities are bundled with Wireless USB Adapter for configuration,
monitoring, and diagnosis purposes.
Pen Size Wireless USB Adapter can wirelessly transmit and receive data,
minimizing the need for wired connections, at a speed of up to eleven megabit
per second. With Wireless USB Adapter, you can locate your PC wherever
you want without wires and cables.
Wireless USB Adapter provides users with an access to real-time information
anywhere in their organization. The mobility provides productivity and
service, which are not available under wired networks. The Wireless USB
Adapter configuration is easy to change from peer-to-peer networks, suitable
for a small number of users, to full infrastructure networks of thousands of
users that allow roaming around a broad area.
Overview of this User’s Guide
Introduction. Describes the Wireless USB Adapter and its features.
Unpacking and Setup. Helps you get started with the basic installation of the
Wireless USB Adapter.
Hardware Installation. Describes the LED indicators of the Adapter.
Software Installation. Tells how to setup the driver and the utility setting.
1
Technical Specifications. Lists the technical (general, physical and
environmental) specifications of the Wireless USB Adapter.
2
Loading...