Cameo Communications WLB1200 Users Manual

IEEE 802.11b

Wireless PCI Adapter

User’s Guide

USA-FCC (Federal Communications Commission)
statement

This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two condition s:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation

15.21

CAUTION: Any changes or modifications not expressly
approved by the party responsible for compliance could
void the user’s authority to operate the equipment.

Prohibition of co-location

This device and its antenna(s) must not be co-located or
operating in conjunction with any other antenna or
transmitter.

15.105 Federal Communications Commission (FCC)
Requirements, Part 15

This equipment has been tested and found to comply with
the limits for a class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:

---Reorient or relocate the receiving antenna.

---Increase the separation between the equipment and
receiver.

---Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.

---Consult the dealer or an experienced radio/TV technician

for help.

Caution Statement of the FCC Radio Frequency
Exposure

This Wireless LAN radio device has been evaluated under
FCC Bulletin OET 65C and found
compliant to the requirements as set forth in CFR 47
Sections 2.1091, 2.1093, and

15.247(b)(4) addressing RF Exposure from radio frequency

devices. The radiation output
power of this Wireless LAN device is far below the FCC
radio frequency exposure limits.
Nevertheless, this device shall be used in such a manner
that the potential for human contact
during normal operation—as a mobile device but use in a
body-worn way is strictly
prohibit. When using this device, a certain separation
distance between antenna and nearby
persons has to be kept to ensure RF exposure compliance.

Regulatory information / Disclaimers

Installation and use of this Wireless LAN device must be in
strict accordance with the instructions included in the user
documentation provided with the product. Any changes or
modifications (including the antennas) made to this device
that are not expressly approved by the manufacturer may
void the user’s authority to operate the equipment. The
manufacturer is not responsible for any radio or television
interference caused by unauthorized modification of this
device, or the substitution of the connecting cables and
equipment other than manufacturer specified. It is the
responsibility of the user to correct any interference caused
by such unauthorized modification, substitution or
attachment. Manufacturer and its authorized resellers or
distributors will assume no liability for any damage or
violation of government regulations arising from failing to
comply with these guidelines.

MPE Statement (Safety Information)

Your device contains a low power transmitter. When device
is transmitted it sends out Radio
Frequency (RF) signal.

Safety Information

CAUTION: To maintain compliance with FCC’s RF
exposure guidelines, this equipment should be installed
and operated with minimum distance 20 cm between the
radiator and your body. Use on the supplied antenna.
Unauthorized antenna, modification, or attachments could
damage the transmitter and may violate FCC regulations.

CE Mark Warning

This is a Class B product. In a domestic environment, this
product may cause radio interference, in which case the
user may be required to take adequate measures.

INTRODUCTION

Congratulations on your purchase of this IEEE 802.11b WLAN PCI Adapter.
This manual helps to get familiar with the WLAN PCI Adapter. This manual

contains detailed instructions in operation of this product. Please keep this
manual for future reference.

With a WLAN (IEEE 802.11b) PCI Adapter, a desktop computer or a station
can communicate with another computer in a wireless way. Easy-to-use
utilities are bundled with WLAN PCI Adapter for configuration, monitoring,
and diagnosis purposes.

WLAN PCI Adapter can wirelessly transmit and receive data, minimizing the
need for wired connections, at a speed of up to eleven megabit per second.
With WLAN PCI Adapter, you can locate your desktop PC or station
wherever you want without wires and cables.

WLAN PCI Adapter provides users with an access to real-time information
anywhere in their organization. The mobility provides productivity and
service, which are not available under wired networks. The WLAN PCI
Adapter configuration is easy to change from peer-to-peer networks, suitable
for a small number of users, to full infrastructure networks of thousands of
users that allow roaming around a broad area.

Overview of this User’s Guide

Introduction. Describes the WLAN PCI Adapter.
Unpacking and Setup. Helps you get started with the basic installation of the

WLAN PCI Adapter.

Hardware Installation. Describes the LED indicators of the Adapter.
Software Installation. Tells how to setup the driver and the utility setting .
Technical Specifications. Lists the technical (general, physical and

environmental) specifications of the WLAN PCI Adapter.

1

UNPACKING AND SETUP

This chapter provides unpacking and setup information for the WLAN
PCI Adapter .

Unpacking

Open the box of the WLAN PCI Adapter and carefully unpack it. The
box should contain the following items:

u One 802.11b WLAN PCI Adapter
u One Driver & Utility CD-ROM
u Quick Installation Guide

If any item is found missing or damaged, please contact your local
reseller for replacement.

Setup

The setup of the WLAN PCI Adapter can be performed using the
following steps:

u Inspect the PCI Adapter and make sure that it is fully plugged in

to the PCI slot.

u Make sure that there is a well environment that there is no much

intrusion to have a better connection.

2